SF0864BA02511S

Integrated Circuit Systems, Inc. DESCRIPTION 864 MHz SAW Filter 3 MHz Bandwidth Part Number SF0864BA02511S Miniature 864 MHz surface acoustic wave (SAW) bandpass filter designed to be used as the RF filter in low power wireless communications equipment. TYPICAL PERFORMANCE MAXIMUM RATINGS Parameter Operating Temperature Range Storage Temperature Range Input Power Level Max. D. C. Voltage between Each Terminal Min -30 -40 Max +80 +85 0 10 Units ºC ºC dBm V SPECIFICATIONS Parameter Center Frequency, FC Passband Insertion Loss1 Amplitude Ripple1 Stopband Rejection2, 841.60 to 843.60 MHz Stopband Rejection2, 852.30 to 853.30 MHz Terminating Impedance Notes: 1. Over passband, Fo +/- 1.5 MHz 2. Relative to the insertion loss Min 3 Typ 864.0 4 1.5 44 38 50 Max 6 2.5 Units MHz MHz dB dB dB dB Ω/0nF 40 30 5/15/2005, rev. X1 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx Integrated Circuit Systems, Inc. PACKAGE OUTLINE AND RECOMMEDED FOOPRINT SUGGESTED PCB FOOTPRINT 3.0 X 3.0 MM, SMP 864 MHz SAW Filter 3 MHz Bandwidth Part Number SF0864BA02511S PIN NO. 2 5 1, 3, 4, 6 DESCRIPTION INPUT OUTPUT GROUND NOTES: DIMENSIONS IN MM TEST CIRCUIT 50 ohm single-ended No matching circuit required All specifications are believed to be accurate and reliable. However, ICS reserves the right to make changes without notice. © 2005 Integrated Circuit Systems, Inc. All rights reserved. 5/15/2005, rev. X1 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx