SF0915BA02501S

Integrated Circuit Systems, Inc. DESCRIPTION 915 MHz SAW Filter 26 MHz Bandwidth Part Number SF0915BA02501S Miniature 915 MHz surface acoustic wave (SAW) bandpass filter in a 3.8x3.8 mm LCC package designed to be used as the RF filter in spread spectrum unlicensed band transceiver, receiver, and transmitter applications. TYPICAL PERFORMANCE MAXIMUM RATINGS Parameter Operating Temperature Range Storage Temperature Range Input Power Level Max. D. C. Voltage between Each Terminal Min -10 -40 Max +70 +85 10 10 Units ºC ºC dBm V SPECIFICATION Parameter Center Frequency FC Bandwidth (3dB) Insertion Loss Passband Amplitude Ripple Stopband Rejection, 10-800 MHz Stopband Rejection, 800-845 MHz Stopband Rejection, 845-880 MHz Stopband Rejection, 947-992 MHz Stopband Rejection, 992-1020 MHz Stopband Rejection, 1020-1200 MHz Temperature Coefficient of Frequency Terminating Impedance Min 26 Typ 915.0 2.8 Max 3.3 1.5 Units MHz MHz dB dB dB dB dB dB dB dB ppm/°K Ω// 0nF 50 45 35 15 35 45 - 30 50 Rev X2 23-May-05 Page 1 of 2 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx Integrated Circuit Systems, Inc. 915 MHz SAW Filter 26 MHz Bandwidth Part Number SF0915BA02501S PACKAGE OUTLINE AND SUGGESTED PCB FOOTPRINT 3.8 X 3.8 MM, SMP SUGGESTED PCB FOOTPRINT PIN NO. 2 5 1, 3, 4, 6 DESCRIPTION INPUT OUTPUT GROUND NOTES: DIMENSIONS IN MM TEST CIRCUIT 50 ohm single-ended No matching circuit required All specifications are believed to be accurate and reliable. However, ICS reserves the right to make changes without notice. © 2005 Integrated Circuit Systems, Inc. All rights reserved. Rev X2 23-May-05 Page 2 of 2 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx