Integrated DeviceTechnology
DeviceTechnology
Integrated
Tsi568A™
Serial RapidIO® Switch
POWER MANAGEMENT | ANALOG & RF | INTERFACE & CONNECTIVITY | CLOCKS & TIMING | MEMORY & LOGIC | TOUCH & USER INTERFACE | VIDEO & DISPLAY | AUDIO
The Tsi568A enhances system scalability through
device configuration and provides architects and
designers with a solution for both throughput
intensive and power sensitive applications.
• Port flexibility for multiple I/O
bandwidth requirements:
– Up to eight 4x mode ports or sixteen 1x
mode ports
– Each 4x serial port can be configured
as two 1x serial ports
• Integrated high-speed, full-duplex
SerDes with 8b/10b encoding
• Advanced non-blocking internal
switching fabric
– Specifically designed for line rate termination
and prevention of head-of-line blocking
– Port SerDes frequency configuration to 1.25,
2.5, and 3.125 Gbits/s
• Look-up tables: Flat addressing of
destination IDs
Up to 4 Serial RapidIO Ports - 1x/4x Mode
or
Up to 8 Serial RapidIO Ports - 1x Mode
Serial RapidIO Interfaces
• Bandwidth of up to 80 Gbps full duplex
• Low latency with cut-through capability
• Individual port power down
• RapidIO Interconnect Specification
(Revision 1.2) compliant
SP0
(4x or 1x)
SP2
(4x or 1x)
SP1
(1x only)
SP3
(1x only)
SP4
(4x or 1x)
SP6
(4x or 1x)
®
SP5
(1x only)
SP8
(4x or 1x)
Internal
Switching Fabric
SP10
(4x or 1x)
SP9
(1x only)
SP11
(1x only)
SP12
(4x or 1x)
SP14
(4x or 1x)
SP13
(1x only)
Other Device Capabilities
• I2C Interface: Configuration through
register initialization
• Hot Swappable ports: Enables use in field
replaceable blade applications
SP7
(1x only)
Up to 4 Serial RapidIO Ports - 1x/4x Mode
or
Up to 8 Serial RapidIO Ports - 1x Mode
FEATURES
SP15
(1x only)
Registers
I2C
JTAG
Slave
Devices
IEEE1149.1
Boundary Scan
Device Overview
The IDT Tsi568A is an industry leading Serial RapidIO switch supporting 80 Gbps aggregate bandwidth. The
Tsi568A is part of a family of switches that enable customers to develop systems with robust features and
high performance at low cost.
The Tsi568A provides designers and architects with maximum scalability to design the device into a
wide range of applications. Flexible port configurations can be selected through multiple port width and
frequency options.
Based on the Serial RapidIO Specification, the Tsi568A incorporates SerDes functionality, error recovery,
priority-based fabric routing, high payload efficiency, and table-based fabric packet routing. In addition,
the Tsi568A supports RapidFabric extensions including data streaming packet switching for interworking
and encapsulation.
The device goes beyond standard specification requirements to solve system level issues by optimizing
performance, lowering power consumption, and supporting hot swappable I/Os. The extensive buffering
and traffic management architecture is specifically designed for line rate termination and the prevention of
head-of-line blocking.
IDT | THE ANALOG + DIGITAL COMPANY
TSI568A SERIAL RAPIDIO SWITCH PRODUCT BRIEF 1
Tsi568A™ Serial RapidIO Switch
Integrated DeviceTechnology
POWER MANAGEMENT | ANALOG & RF | INTERFACE & CONNECTIVITY | CLOCKS & TIMING | MEMORY & LOGIC | TOUCH & USER INTERFACE | VIDEO & DISPLAY | AUDIO
BENEFITS
• Scalability: device variations of port width
and frequencies
• Performance: low latency and high
protocol efficiency
• Power: low power implementation of
integrated SerDes functionality
• Time-to-market:
leverages open-standard technology
Typical Applications
The Tsi568A can be used in many embedded communication applications. It provides chip-to-chip
interconnect between I/O devices and can replace existing proprietary backplane fabrics for board-toboard interconnect which improves system cost and product time-to-market.
The Tsi568A provides traffic aggregation through packet prioritization when it is used with RapidIOenabled I/O devices. When it is in a system with multiple RapidIO-enabled processors it provides high
performance peer-to-peer communication through its non-blocking switch fabric.
Processor Farm Mezzanine
Specifications
• Technology: 0.13um
• Voltage: 1.2V and 3.3V
• Low power consumption
– Highly configuration dependent with
SerDes voltage range, baud rate, and
port width impacting power consumption
• Package: 675 ball, 27mm x 27mm,
1mm ball pitch FCBGA
Target Markets
• Wireless Embedded Communications
– Node B, Radio Network Controller,
Media Gateway
• Access Embedded Communications
– Multiservice WAN Switches, 1 to 10 Gbit
Ethernet Switches, 1 to >10 Gbit
Routers, DSLAMs
• Storage
– Storage Area Networks,
Network Attached Storage,
High-Performance Work Stations
DSP
®
Tsi568A
DSP
Switch Carrier Blade
AMC Slot
AMC Slot
AMC Slot
AMC Slot
®
Discover what IDT know-how
can do for you: www.IDT.com
Dual
Serial
RapidIO
Tsi568A
®
Tsi568A
Serial RapidIO Mesh
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters
of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied
warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. © Copyright 2011. All rights reserved.
IDT | THE ANALOG + DIGITAL COMPANY
PB TSI568A SRIO SWCH PB REV50311
TSI568A SERIAL RAPIDIO SWITCH PRODUCT BRIEF 2
很抱歉,暂时无法提供与“TSI568A-10GCL”相匹配的价格&库存,您可以联系我们找货
免费人工找货