G33M

T-1 (3 mm) Panel Mount LED Indicator G33M and G35M Series www.ledidea.com The G33M and G35M series of indicators are made of chrome-plated brass. Any of IDEA's standard T-1 lamps may be used. These assemblies are furnished with matching lock washer and nut. Recommended for panels up to 3 mm (1/8”) thick. Recommended hole size is 6 mm (or 15/64”). For the convenience of OEM users, IDEA can furnish both of these series with wires attached. Black plating is also available on special order to high volume users. 3.0Ø 8.0 Anode G33M 2.5 13 max 3.0Ø 8.0 Anode G35M 3 12 max Specify part desired as follows: (X = total number of LEDs in array, and may be up to 8 maximum.) G33M/Order Code or G35M/Order Code For example: “G33M/G” designates an assembly with a green LED. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type Color Hi Eff Red TInted Diffused Resistor Required Green Yellow Orange Hi Eff Red Tinted Transparent High Brightness Green Yellow Hi Eff Red Tinted Diffused For 2mA Operation Green Yellow Hi Eff Red Tinted Diffused 5V Operation Green Yellow Red/Green White Diffused Bipolar, Bicolor Yellow/Green Red/Yellow Order Code I G Y O IT GT YT I2 G2 Y2 I5 G5 Y5 EG YG EY Peak λ (nm) 635 565 585 610 635 565 585 635 565 585 635 565 585 635/565 585/565 635/585 Typical Characteristics Vf (V) @If=20mA 2.0 2.1 2.0 2.0 2.0 2.1 2.0 2.0 2.1 2.0 2.0/2.1 2.0/2.1 2.0/2.0 Iv (mcd) @If=10mA 10 10 10 10 40 40 40 1.0 @ 2mA 1.0 @ 2mA 1.0 @ 2mA 10 10 10 4/4 4/4 4/4 2Θ1/2 (Deg) 60 60 60 60 40 40 40 60 60 60 60 60 60 90 90 90 Recom. Op. If (mA) 10-20 10-20 10-20 10-20 10-20 10-20 10-20 2-10 2-10 2-10 5V 5V 5V 10-20 10-20 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G