G66B

T-1-3/4, Right-Angle LED Assembly G66B and G67B Series The G66B and G67B series of right-angle indicators are shorter front to back than the G621B and G641B. These two series are useful where the extra 3 mm length behind the body cannot be accommodated in the design. In addition to the variety of lamps listed below, most T-1-3/4 LEDs can be special ordered. 6.1 3.5±.5 6.2 5.0±.5 6.2 6.1 4.7 3.2 3.5 min 5.2 G66B 4.8 3.5 min 5.2 G67B +– (Pinout for single color) Red or yellow Anode Green Anode (typ for bi-color) Specify part desired as follows: G66B/ or G67B/Order Code Please note the G66B series is not available with a built in resistor. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type Color Red TInted Diffused Resistor Required Hi Eff Red Green Yellow Hi Eff Red Tinted Transparent High Brightness Green Yellow Red Tinted Diffused For 2mA Operation Hi Eff Red Green Yellow Hi Eff Red Tinted Diffused 5V Operation Green Yellow Hi Eff Red Tinted Diffused 12V Operation Green Yellow Hi Eff Red/Grn White Diffused Bipolar, Bicolor Yellow/Green Red/Green Order Code H I G Y IT GT YT H2 I2 G2 Y2 I5 G5 Y5 IB GB YB EG YG SG Peak λ (nm) 697 635 565 585 635 565 585 697 635 565 585 635 565 585 635 565 585 635/565 585/565 660/570 Typical Characteristics Vf (V) @If=20mA 2.1 2.0 2.1 2.0 2.0 2.1 2.0 2.0 2.1 2.0 2.0 2.1/2.0 2.1/2.0 1.8/2.2 Iv (mcd) @If=10mA 2.0 9.0 9.0 7.0 30 30 28 1.6 @ 2mA 2.0 @ 2mA 2.0 @ 2mA 2.0 @ 2mA 4.5 4.5 4.5 4.5 4.5 4.5 2.5/2.5 2.5/2.5 6.0/2.5 2Θ1/2 (Deg) 36 36 36 36 16 16 16 36 36 36 36 36 36 36 36 36 36 54 54 Recom. Op. If (mA) 5-10 10-20 10-20 10-20 10-20 10-20 10-20 2-10 2-10 2-10 2-10 5V 5V 5V 12 V 12 V 12 V 10-20 10-20 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-35