G96XB

T-1 (3 mm) Round, Single- and Bi-color PCB Mount Right Angle LED Indicator, G96XB Series The G96B right angle indicator is primarily designed to use the three-leaded bi-color LED lamp which has pins spaced on 2.54 mm centers in a single row. It has a wide stance and its length permits the front of the holder to protrude further from the edge of the PCB. In addition to those LEDs listed, any of IDEA's 2151 series of T-1 lamps can be used in this indicator. Standard 3-leaded bi-color lamps are common cathode. 6.9 2.5 8.5 5.08 1 2 2.54 G962B Single-color 1 2 3 3 10.8 2.54 typ G963B Bi-color 12.2 LED Type Tri-color—EG (Both chips on for amber) Bi-color—YG Single color—All listed Connections Pin 1 Pin 2 Pin 3 Red+ Common– Grn+ Yel+ Common– Grn+ Anode Cathode Specify part desired as follows: (X = 2 for single color, tinted 2-leaded LEDs. X = 3 for 3-leaded G96XB/Order Code For example: “G963B/EG” designates an assembly with a red/green LED. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type Color Red Hi Eff Red TInted Diffused Resistor Required Green Yellow Orange Hi Eff Red Tinted Transparent High Brightness Green Yellow Red Tinted Diffused For 2mA Operation Hi Eff Red Green Yellow White Diffused Bipolar, Bicolor Red/Green Yellow/Green Order Code H I G Y O IT GT YT H2 I2 G2 Y2 EG YG Peak λ (nm) 697 635 565 585 610 635 565 585 697 635 565 585 635/565 585/565 Typical Characteristics Vf (V) @If=20mA 2.1 2.0 2.1 2.0 2.0 2.0 2.1 2.0 2.0 2.1 2.0 2.0 2.1/2.0 2.1/2.0 Iv (mcd) @If=10mA 1.6 4.5 4.5 4.5 4.5 11 15 10 1.2 @ 2mA 1.4 @ 2mA 1.2 @ 2mA 1.2 @ 2mA 2.5/2.5 2.5/2.5 2Θ1/2 (Deg) 40 40 40 40 40 20 20 20 40 40 40 40 54 54 Recom. Op. If (mA) 5-10 10-20 10-20 10-20 10-20 10-20 10-20 10-20 2-10 2-10 2-10 2-10 10-20 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-24