J261B

T-1, (3-mm) Round, PCB Mount Right Angle Array, J261B Series The J261B is a T-1 size right-angle indicator array and can be CMOS driven to save components. The LEDs are located 0.2" from the PCB. It is designed to be physically interchangeable with many other manufacturers. This series can also be supplied with pinout reversed from that shown by adding “-RL” to the order code of the part number. The holder is made from black plastic with a flammability rating of UL94-V0. 4.3 (.17) 2.5±.5 6.35 (.250) 5.08 (.200) IDEA 7.1 (.280) 3.5 min 3 typ IDEA 4.4 (.175) Pin Assignment Red or yellow Anode 2.54(0.10) +– (typ for single color) Green Anode (typ for bi-color) Specify part desired as follows: J261B/Order Code For example: “J261B/G” designates an assembly with a green LED. “J261B/EG-RL” designates a red/green bi-color assembly with pins reversed. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type Color Order Code Peak λ (nm) 639 575 591 Typical Characteristics Vf (V) @If=20mA 1.8 1.7 1.85 Iv (mcd) @If=2 mA 4.0 2.5 4.0 2Θ1/2 (Deg) 50 60 45 Recom. Op. If (mA) Red TInted Diffused Green Yellow I G Y 2 - 10 2 - 10 2 - 10 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A