9FG1201HFLFT

DATASHEET Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Description The ICS9FG1201H follows the Intel DB1200G Rev 1.0 Differential Buffer Specification. This buffer provides 12 output clocks for CPU Host Bus, PCI-Express, or Fully Buffered DIMM applications. The outputs are configured with two groups. Both groups (DIF 9:0) and (DIF 11:10) can be equal to or have a gear ratio to the input clock. A differential CPU clock from a CK410B or CK410B+ main clock generator, such as the ICS932S421, drives the ICS9FG1201. The ICS9FG1201H can provide outputs up to 400MHz ICS9FG1201H Features/Benefits • • • • • • • • Drives 2 channels of 4 FBDIMMs (total of 8 FBDIMMs) Power up default is all outputs in 1:1 mode DIF_(9:0) can be “gear-shifted” from the input CPU Host Clock DIF_(11:10) can be “gear-shifted” from the input CPU Host Clock Spread spectrum compatible Supports output clock frequencies up to 400 MHz 8 Selectable SMBus addresses SMBus address determines PLL or Bypass mode Key Specifications • • • DIF output cycle-to-cycle jitter < 50ps DIF output-to-output skew < 50ps within a group DIF output-to-output skew < 100ps across all outputs • • 56-pin SSOP/TSSOP package RoHS compliant packaging Functional Block Diagram OE# SPREAD COMPATIBLE PLL GEAR SHIFT LOGIC STOP LOGIC 2 DIF(11:10) OE(9:0)# 10 CLK_IN CLK_IN# SPREAD COMPATIBLE PLL GEAR SHIFT LOGIC STOP LOGIC 10 DIF(9:0) HIGH_BW# FS_A_410 VTT_PWRGD#/PD SMB_A0 SMB_A1 SMB_A2_PLLBYP# SMBDAT SMBCLK CONTROL LOGIC IREF IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 1 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Pin Configuration HIGH_BW# CLK_IN CLK_IN# SMB_A0 OE0# DIF_0 DIF_0# OE1# DIF_1 DIF_1# VDD GND DIF_2 DIF_2# OE2# DIF_3 DIF_3# OE3# DIF_4 DIF_4# OE4# VDD GND DIF_5 DIF_5# OE5# SMB_A1 SMBDAT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 VDDA GNDA IREF OE10_11# DIF_11 DIF_11# VDD GND DIF_10 DIF_10# FS_A_410 VTT_PWRGD#/PD OE9# DIF_9 DIF_9# OE8# DIF_8 DIF_8# VDD GND DIF_7 DIF_7# OE7# DIF_6 DIF_6# OE6# SMB_A2_PLLBYP# SMBCLK 56-pin SSOP & TSSOP Functionality Table DIF_(9:0) Output DIF_(11:10) Output MHz MHz 1 100.00 100.00 1 133.33 133.33 1 166.66 166.66 1 RESERVED 0 200.00 200.00 200.00 0 266.66 266.66 266.66 0 333.33 333.33 333.33 0 400.00 400.00 400.00 1. FS_A_410 is a low-threshold input. Please see the VIL_FS and VIH_FS s pecifications in the Input/Supply/Common Output Parameters Table for correct values. FS_A_410 1 CLK_IN (CPU FSB) MHz 100.00 133.33 166.66 IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD ICS9FG1201H 1371F — 09/23/09 2 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Power Groups Pin Number VDD GND 56 55 11,22,38,50 12,23,37,49 Description Main PLL, Analog DIF clocks Pin Description Pin # Pin Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 HIGH_BW# CLK_IN CLK_IN# SMB_A0 OE0# DIF_0 DIF_0# OE1# DIF_1 DIF_1# VDD GND DIF_2 DIF_2# OE2# DIF_3 DIF_3# OE3# DIF_4 DIF_4# OE4# VDD GND DIF_5 DIF_5# OE5# SMB_A1 SMBDAT Type IN IN IN IN IN OUT OUT IN OUT OUT PWR PWR OUT OUT IN OUT OUT IN OUT OUT IN PWR PWR OUT OUT IN IN I/O Pin Description 3.3V input for selecting PLL Band Width 0 = High, 1= Low Input for reference clock. "Complementary" reference clock input. SMBus address bit 0 (LSB) Active low input for enabling DIF pair 0. 1 = tri-state outputs, 0 = enable outputs 0.7V differential true clock output 0.7V differential complement clock output Active low input for enabling DIF pair 1. 1 = tri-state outputs, 0 = enable outputs 0.7V differential true clock output 0.7V differential complement clock output Power supply, nominal 3.3V Ground pin. 0.7V differential true clock output 0.7V differential complement clock output Active low input for enabling DIF pair 2. 1 = tri-state outputs, 0 = enable outputs 0.7V differential true clock output 0.7V differential complement clock output Active low input for enabling DIF pair 3. 1 = tri-state outputs, 0 = enable outputs 0.7V differential true clock output 0.7V differential complement clock output Active low input for enabling DIF pair 4 1 = tri-state outputs, 0 = enable outputs Power supply, nominal 3.3V Ground pin. 0.7V differential true clock output 0.7V differential complement clock output Active low input for enabling DIF pair 5. 1 = tri-state outputs, 0 = enable outputs SMBus address bit 1 Data pin of SMBUS circuitry, 5V tolerant IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 3 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Pin Description (continued) Pin # Pin Name 29 SMBCLK 30 SMB_A2_PLLBYP# Type IN IN Pin Description Clock pin of SMBUS circuitry, 5V tolerant SMBus address bit 2. When Low, the part operates as a fanout buffer with the PLL bypassed. When High, the part operates as a zero-delay buffer (ZDB) with the PLL operating. 0 = fanout mode (PLL bypassed), 1 = ZDB mode (PLL used) Active low input for enabling DIF pair 6. 1 = tri-state outputs, 0 = enable outputs 0.7V differential complement clock output 0.7V differential true clock output Active low input for enabling DIF pair 7. 1 = tri-state outputs, 0 = enable outputs 0.7V differential complement clock output 0.7V differential true clock output Ground pin. Power supply, nominal 3.3V 0.7V differential complement clock output 0.7V differential true clock output Active low input for enabling DIF pair 8. 1 = tri-state outputs, 0 = enable outputs 0.7V differential complement clock output 0.7V differential true clock output Active low input for enabling DIF pair 9. 1 = tri-state outputs, 0 = enable outputs Vtt_PwrGd# is an active low input used to determine when latched inputs are ready to be sampled. PD is an asynchronous active high input pin used to put the device into a low power state. The internal clocks, PLLs and the crystal oscillator are stopped. 3.3V tolerant low threshold input for CPU frequency selection. This pin requires CK410 FSA. Refer to input electrical characteristics for Vil_FS and Vih_FS threshold values. 0.7V differential complement clock output 0.7V differential true clock output Ground pin. Power supply, nominal 3.3V 0.7V differential complement clock output 0.7V differential true clock output Active low input for enabling output pairs 10 and 11. 1 = tri-state outputs, 0 = enable outputs This pin establishes the reference current for the differential currentmode output pairs. This pin requires a fixed precision resistor tied to ground in order to establish the appropriate current. 475 ohms is the standard value. Ground pin for the PLL core. 3.3V power for the PLL core. 31 32 33 34 35 36 37 38 39 40 41 42 43 44 OE6# DIF_6# DIF_6 OE7# DIF_7# DIF_7 GND VDD DIF_8# DIF_8 OE8# DIF_9# DIF_9 OE9# IN OUT OUT IN OUT OUT PWR PWR OUT OUT IN OUT OUT IN 45 VTT_PWRGD#/PD IN 46 47 48 49 50 51 52 53 FS_A_410 DIF_10# DIF_10 GND VDD DIF_11# DIF_11 OE10_11# IN OUT OUT PWR PWR OUT OUT IN 54 55 56 IREF GNDA VDDA OUT PWR PWR IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 4 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD ICS9FG1201 Programmable Gear Ratios FS_A_410 SMBus Byte 0 Bit 3 Bit 2 Bit 1 Bit 0 Input Output Gear Ratio (m) (n) (n/m) Input (CPU FSB) and Output Frequencies (MHz) 200.0 3 5 12 2 5 8 3 4 6 1 5 4 3 2 3 1 1 2 5 1 3 5 2 3 5 1 6 5 4 3 5 2 0.333 0.400 0.417 0.500 0.600 0.625 0.667 0.750 0.833 1.000 1.200 1.250 1.333 1.500 1.667 2.000 266.7 320.0 333.3 400.0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 66.7 88.9 106.7 111.1 133.3 80.0 106.7 128.0 133.3 160.0 83.3 111.1 133.3 138.9 166.7 100.0 133.3 160.0 166.7 200.0 120.0 160.0 192.0 200.0 240.0 125.0 166.7 200.0 208.3 250.0 133.3 177.8 213.3 222.2 266.7 150.0 200.0 240.0 250.0 300.0 166.7 222.2 266.7 277.8 333.3 200.0 266.7 320.0 333.3 400.0 240.0 320.0 384.0 400.0 NA 250.0 333.3 400.0 NA NA 266.7 355.6 NA NA NA 300.0 400.0 NA NA NA 333.3 NA NA NA NA 400.0 NA NA NA NA CLK IN (CPU FSB) Frequency (MHz) 100 133.33 160 166.67 10000 3 1 0.333 10001 5 2 0.400 NA 53.3 64.0 66.7 10010 12 5 0.417 NA 55.6 66.7 69.4 10011 2 1 0.500 50.0 66.7 80.0 83.3 10100 5 3 0.600 60.0 80.0 96.0 100.0 10101 8 5 0.625 62.5 83.3 100.0 104.2 10110 3 2 0.667 66.7 88.9 106.7 111.1 10111 5 4 0.800 80.0 106.7 128.0 133.3 11000 6 5 0.833 NA 111.1 133.3 138.9 11001 1 1 1.000 100.0 133.3 160.0 166.7 11010 5 6 1.200 120.0 160.0 192.0 200.0 11011 4 5 1.250 125.0 166.7 200.0 208.3 11100 3 4 1.333 133.3 177.8 213.3 222.2 11101 2 3 1.500 150.0 200.0 11110 3 5 1.667 166.7 222.2 266.7 277.8 11111 1 2 2.000 200.0 266.7 320.0 333.3 Note: Lines in BOLD are Power-up defaults for FS_A_410 = 0 and 1 respectively. Shaded areas are shown for reference only and are not necessarily valid operating points IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 5 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD ICS 9FG1201H 1:1 PLL Programming Byte 8, bit 2 FSC 1 0 0 0 0 1 1 1 Byte 8, bit 1 FSB 0 0 1 1 0 0 1 1 Byte 8, bit 0 FS_A_410 1 1 1 0 0 0 0 1 CLK_IN 1:1 DIF (CPU FSB) Outputs MHz MHz 100.00 100.00 133.33 133.33 166.67 166.67 200.00 200.00 266.67 266.67 333.33 333.33 400.00 400.00 Reserved Notes 3 3 1 3 3 3 2 Notes:FS_A_410 = 1 1. Powerup Default for FS_A_410 = 1 2. Powerup Default for FS_A_410 = 0 3. Setting the exact FSB frequency after Power up is required for best phase noise performance. IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 6 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 9FG1201/2 SMBus Address Mapping when using CK410B+ and DB400/800 SMB_A(2:0) = 000 SMB Adr: D0 9FG1201/2 (DB1200G) PLL BYPASS MODE SMB_A2_PLLBYP# = 0 SMB_A(2:0) = 001 SMB Adr: D2 9FG1201/2 (DB1200G) OR SMB Adr: D2 932S421 (CK410B+) SMB_A(2:0) = 010 SMB Adr: D4 9FG1201/2 (DB1200G) SMB_A(2:0) = 011 SMB Adr: D6 ` 9FG1201/2 (DB1200G) SMB_A(2:0) = 100 SMB Adr: D8 9FG1201/2 (DB1200G) IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD PLL ZDB MODE SMB_A2_PLLBYP# = 1 SMB_A(2:0) = 101 SMB Adr: DA 9FG1201/2 (DB1200G) SMB_A(2:0) = 110 SMB Adr: DC 9FG1201/2 (DB1200G) OR SMB Adr: DC 9DB401/801 (DB400/800) SMB_A(2:0) = 111 SMB Adr: DE 9FG1201/2 (DB1200G) 1371F — 09/23/09 7 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD General SMBus serial interface information for the ICS9FG1201H How to Write: • • • • • • • • Controller (host) sends a start bit. Controller (host) sends the write address D0 (h) ICS clock will acknowledge Controller (host) sends the begining byte location = N ICS clock will acknowledge Controller (host) sends the data byte count = X ICS clock will acknowledge Controller (host) starts sending Byte N through Byte N + X -1 • ICS clock will acknowledge each byte one at a time • Controller (host) sends a Stop bit How to Read: • • • • • • • • • • • • • • Controller (host) will send start bit. Controller (host) sends the write address D0 (h) ICS clock will acknowledge Controller (host) sends the begining byte location = N ICS clock will acknowledge Controller (host) will send a separate start bit. Controller (host) sends the read address D1 (h) ICS clock will acknowledge ICS clock will send the data byte count = X ICS clock sends Byte N + X -1 ICS clock sends Byte 0 through byte X (if X(h) was written to byte 8). Controller (host) will need to acknowledge each byte Controllor (host) will send a not acknowledge bit Controller (host) will send a stop bit Index Block Write Operation Controller (Host) starT bit T Slave Address D0(h)* WRite WR Beginning Byte = N ACK Data Byte Count = X ACK Beginning Byte N ACK X Byte ICS (Slave/Receiver) Index Block Read Operation Controller (Host) T starT bit Slave Address D0(h)* WR WRite Beginning Byte = N ACK RT Repeat starT Slave Address D1(h)* RD ReaD ACK Data Byte Count = X ACK Beginning Byte N ACK X Byte ICS (Slave/Receiver) ACK ACK Byte N + X - 1 ACK P stoP bit Byte N + X - 1 N P Not acknowledge stoP bit * Note: See SMBus Address Mapping (page 7), for programming SMBus Read/Write Address IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 8 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD SMBusTable: Gear Ratio Select Register Byte 0 Pin # Name Control Function DIF(9:0) Group of 10 gear ratio enable Bit 7 DIF(11:10) Group of 2 gear ratio enable Bit 6 Reserved Bit 5 Gear Ratio FS4 (FS_A_410) Bit 4 Gear Ratio FS3 Bit 3 Gear Ratio FS2 Bit 2 Gear Ratio FS1 Bit 1 Gear Ratio FS0 Bit 0 SMBusTable: Output Control Register Byte 1 Pin # Name 35, 36 DIF_7 Bit 7 32, 33 DIF_6 Bit 6 24, 25 DIF_5 Bit 5 19,20 DIF_4 Bit 4 16,17 DIF_3 Bit 3 13,14 DIF_2 Bit 2 9,10 DIF_1 Bit 1 6,7 DIF_0 Bit 0 Type 0 1 RW Gear Ratio 1:1 RW Gear Ratio 1:1 RW RW See 9FG1201 RW Programmable Gear RW Ratios Table RW RW PWD 1 1 1 Latch 1 0 1 1 Control Function Output Control Output Control Output Control Output Control Output Control Output Control Output Control Output Control Type RW RW RW RW RW RW RW RW 0 Hi-Z Hi-Z Hi-Z Hi-Z Hi-Z Hi-Z Hi-Z Hi-Z 1 Enable Enable Enable Enable Enable Enable Enable Enable PWD 1 1 1 1 1 1 1 1 SMBusTable: Output and PLL BW Control Register Byte 2 Pin # Name Control Function Type 0 Reserved Bit 7 see note PLL_BW# adjust RW High BW Bit 6 see note BYPASS# test mode / PLL RW Bypass Bit 5 Reserved Bit 4 51,52 DIF_11 Output Control RW Hi-Z Bit 3 47,48 DIF_10 Output Control RW Hi-Z Bit 2 42,43 DIF_9 Output Control RW Hi-Z Bit 1 DIF_8 Output Control RW Hi-Z 39,40 Bit 0 Note: Bit 6 is wired OR to the pin 1 input, any 0 selects High BW Note: Bit 5 is wired OR to the pin 30 input, any 0 selects Fanout Bypass mode SMBusTable: Output Enable Readback Register Byte 3 Pin # Name Control Function 34 Readback - OE7# Input Bit 7 31 Readback - OE6# Input Bit 6 26 Readback - OE5# Input Bit 5 21 Readback - OE4# Input Bit 4 18 Readback - OE3# Input Bit 3 15 Readback - OE2# Input Bit 2 8 Readback - OE1# Input Bit 1 5 Readback - OE0# Input Bit 0 1 Low BW PLL Enable Enable Enable Enable PWD 1 1 1 1 1 1 1 1 Type R R R R R R R R 0 Readback Readback Readback Readback Readback Readback Readback Readback 1 PWD X X X X X X X X IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 9 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD SMBusTable: Output Enable Readback Register Byte 4 Pin # Name Control Function 46 Readback - FS_A_410 Bit 7 1 Readback - HIGH_BW# In Bit 6 30 Readback - SMB_A2_PLLBYP# In Bit 5 Reserved Bit 4 Reserved Bit 3 53 Readback - OE10_11# Input Bit 2 44 Readback - OE9# Input Bit 1 41 Readback - OE8# Input Bit 0 SMBusTable: Vendor & Revision ID Register Byte 5 Pin # Name Control Function RID3 Bit 7 RID2 Bit 6 REVISION ID RID1 Bit 5 RID0 Bit 4 VID3 Bit 3 VID2 Bit 2 VENDOR ID VID1 Bit 1 VID0 Bit 0 SMBusTable: DEVICE ID Byte 6 Pin # Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Type R R R R R R R R 0 Readback Readback Readback Readback Readback Readback Readback Readback 1 PWD X X X X X X X X Type R R R R R R R R 0 - 1 - PWD X X X X 0 0 0 1 Name Control Function Device ID 7 (MSB) Device ID 6 Device ID 5 Device ID 4 Device ID 3 Device ID 2 Device ID 1 Device ID 0 Type RW RW RW RW RW RW RW RW 0 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 1 PWD 1 1 0 0 0 0 0 1 SMBusTable: Byte Count Register Byte 7 Pin # Name BC7 Bit 7 BC6 Bit 6 BC5 Bit 5 BC4 Bit 4 BC3 Bit 3 BC2 Bit 2 BC1 Bit 1 BC0 Bit 0 Type RW RW RW Writing to this register RW configures how many RW bytes will be read back. RW RW RW Control Function 0 - 1 - PWD 0 0 0 0 1 0 0 1 IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 10 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD SMBusTable: 1:1 PLL Frequency Selection Byte 8 Pin # Name Control Function RESERVED Bit 7 RESERVED Bit 6 RESERVED Bit 5 RESERVED Bit 4 RESERVED Bit 3 Frequency Select C Bit 2 Frequency Select B Bit 1 FS_A_410 Bit 0 SMBusTable: Reserved Register Byte 9 Pin # Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 SMBus Table: M/N Programming Enable Byte 10 Pin # Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 M/N_EN Type 0 1 RW RW RW See 9FG1201H 1:1 PLL Programming Table PWD 0 0 0 0 0 x 1 Latch Control Function Type RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 1 PWD 0 0 0 0 0 0 0 0 Control Function Type Gear PLL and 1:1 PLL M/N Programming RW Enable RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 Disable 1 Enable PWD 0 X X X X X X X SMBus Table: Gear PLL Frequency Control Register Byte 11 Pin # Name Control Function RESERVED Bit 7 RESERVED Bit 6 Gear PLL M Div5 Bit 5 Gear PLL M Div4 Bit 4 M Divider Programming Gear PLL M Div3 Bit 3 bits Gear PLL M Div2 Bit 2 Gear PLL M Div1 Bit 1 Gear PLL M Div0 Bit 0 Type 0 1 RW RW RW RW RW RW See 9FG1201H M/N programming Table PWD X X X X X X X X IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 11 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD SMBus Table: Gear PLL Frequency Control Register Byte 12 Pin # Name Control Function Gear PLL N Div7 Bit 7 Gear PLL N Div6 Bit 6 Gear PLL N Div5 Bit 5 N Divider Programming Gear PLL N Div4 Bit 4 bits Gear PLL N Div3 Bit 3 Gear PLL N Div2 Bit 2 Gear PLL N Div1 Bit 1 Gear PLL N Div0 Bit 0 SMBusTable: Gear PLL Output Divider Register Byte 13 Pin # Name Control Function RESERVED Bit 7 RESERVED Bit 6 RESERVED Bit 5 RESERVED Bit 4 GoutDiv 3 Bit 3 GoutDiv 2 Bit 2 Gear Output Divider GoutDiv 1 Bit 1 GoutDiv 1 Bit 0 SMBusTable: Reserved Register Byte 14 Pin # Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 SMBusTable: Reserved Register Byte 15 Pin # Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Type RW RW RW RW RW RW RW RW 0 1 See 9FG1201H M/N programming Table PWD X X X X X X X X Type 0 1 RW RW RW RW See Gear Output Divider Table PWD 0 0 0 0 X X X X Control Function Type RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 1 PWD 0 0 0 0 0 0 0 0 Control Function Type RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 1 PWD 0 0 0 0 0 0 0 0 IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 12 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD SMBusTable: Reserved Register Byte 16 Pin # Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Control Function Type RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 1 PWD 0 0 0 0 0 0 0 0 SMBus Table: 1:1 PLL Frequency Control Register Byte 17 Pin # Name Control Function RESERVED Bit 7 RESERVED Bit 6 1:1 PLL M Div5 Bit 5 1:1 PLL M Div4 Bit 4 M Divider Programming 1:1 PLL M Div3 Bit 3 bits 1:1 PLL M Div2 Bit 2 1:1 PLL M Div1 Bit 1 1:1 PLL M Div0 Bit 0 SMBus Table: 1:1 PLL Frequency Control Register Byte 18 Pin # Name Control Function 1:1 PLL N Div7 Bit 7 1:1 PLL N Div6 Bit 6 1:1 PLL N Div5 Bit 5 N Divider Programming 1:1 PLL N Div4 Bit 4 bits 1:1 PLL N Div3 Bit 3 1:1 PLL N Div2 Bit 2 1:1 PLL N Div1 Bit 1 1:1 PLL N Div0 Bit 0 Type 0 1 RW RW RW RW RW RW See 9FG1201H M/N programming Table PWD 0 0 X X X X X X Type RW RW RW RW RW RW RW RW 0 1 See 9FG1201H M/N programming Table PWD X X X X X X X X SMBusTable: 1:1 PLL Output Divider Register Byte 19 Pin # Name Control Function Type RESERVED Bit 7 RESERVED Bit 6 RESERVED Bit 5 RESERVED Bit 4 RW 1outDiv 3 Bit 3 RW 1outDiv 2 Bit 2 1:1 Output Divider RW 1outDiv 1 Bit 1 RW 1outDiv 1 Bit 0 0 1 See 1:1 Output Divider Table PWD 0 0 0 0 X X X X IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 13 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD SMBusTable: Reserved Register Byte 20 Pin # Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Control Function Type RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 1 PWD 0 0 0 0 0 0 0 0 SMBusTable: Test Byte Register Byte 21 Test Test Function Type ` ICS ONLY TEST RW Bit 7 ICS ONLY TEST RW Bit 6 ICS ONLY TEST RW Bit 5 ICS ONLY TEST RW Bit 4 I CS ONLY TEST RW Bit 3 ICS ONLY TEST RW Bit 2 ICS ONLY TEST RW Bit 1 ICS ONLY TEST RW Bit 0 Note: Do NOT write to Bit 21. Erratic device operation will result! Test Result Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved PWD 0 0 0 0 0 0 0 0 IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 14 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Absolute Max PARAMETER 3.3V Core Supply Voltage 3.3V Logic Supply Voltage Storage Temperature Ambient Operating Temp Case Temperature Input ESD protection SYMBOL VDD_A VDD_In Ts Tambient Tcase ESD prot CONDITIONS MIN GND - 0.5 GND - 0.5 -65 0 Human Body Model 2000 TYP MAX VDD + 0.5V VDD + 0.5V 150 70 115 UNITS Notes V V C ° C ° C V ° 1 1 1 1 1 1 Electrical Characteristics - Input/Supply/Common Output Parameters TA = 0 - 70° Supply Voltage V DD = 3.3 V +/-5% C; PARAMETER Input High Voltage Input Low Voltage Input High Current Input Low Current Low Threshold InputHigh Voltage Low Threshold InputLow Voltage Operating Current Powerdown Current Input Frequency Pin Inductance Input Capacitance Clk Stabilization Modulation Frequency Tdrive_PD# Tfall_Pd# Trise_Pd# S MBus Voltage Low-level Output Voltage Current sinking at VOL = 0.4 V SCLK/SDATA Clock/Data Rise Time SCLK/SDATA Clock/Data Fall Time SYMBOL V IH VIL I IH I IL1 VIH_FS VIL_FS I DD3.3OP I DD3.3PD Fi Lpin CIN COUT TSTAB CONDITIONS 3.3 V +/-5%, Except CLK_IN 3.3 V +/-5%, Except CLK_IN VIN = VDD VIN = 0 V ; Inputs with no pullup resistors 3.3 V +/-5%, Applies to FS_A_410 pin 3.3 V +/-5%, Applies to FS_A_410 pin all outputs driven all differential pairs tri-stated VDD = 3.3 V Logic Inputs Output pin capacitance From VDD Power-Up or deassertion of PD# to 1st clock Triangular Modulation DIF output enable after PD# de-assertion PD# fall time of PD# rise time of Maximum input voltage @ I PULLUP MIN 2 V SS - 0.3 -5 -5 0.7 V SS - 0.3 V DD + 0.3 0.35 375 24 400 7 5 5 1.8 30 33 300 5 5 5.5 0.4 4 (Max VIL - 0.15) to (Min VIH + 0.15) (Min VIH + 0.15) to (Max VIL - 0.15) 1000 300 TYP MAX V DD + 0.3 0.8 5 UNITS Notes V V uA uA V V mA mA MHz nH pF pF ms kHz us ns ns V V mA ns ns 1 1 1 1 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 100 VMAX VOL I PULLUP TRI2C TFI2C IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 15 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Electrical Characteristics - DIF 0.7V Current Mode Differential Pair TA = 0 - 70° VDD = 3.3 V +/-5%; CL =2pF, RS=33.2Ω, RP=49.9Ω, ΙREF = 475Ω C; PARAMETER Current Source Output Impedance Voltage High Voltage Low Max Voltage Min Voltage Crossing Voltage (abs) Crossing Voltage (var) Long Accuracy SYMBOL Zo 1 CONDITIONS VO = Vx Statistical measurement on single ended signal using oscilloscope math function. Measurement on single ended signal using absolute value. MIN 3000 660 -150 -300 250 TYP MAX UNITS NOTES Ω 1 1,3 mV 1,3 mV mV mV ppm ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ps ps ps ps % ps ps 1 1 1 1 1,2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1 1 1 1 1 1,4,5 1,4 VHigh VLow Vovs Vuds Vcross(abs ) d-Vcross ppm 850 150 1150 550 140 Average period Tperiod Absolute min period Tabsmin Rise Time Fall Time Rise Time Variation Fall Time Variation Duty Cycle tr tf d-tr d-tf dt3 tJCYC-CYC Variation of crossing over all edges see Tperiod min-max values 400MHz nominal 400MHz spread 333.33MHz nominal 333.33MHz spread 266.66MHz nominal 266.66MHz spread 200MHz nominal 200MHz spread 166.66MHz nominal 166.66MHz spread 133.33MHz nominal 133.33MHz spread 100.00MHz nominal 100.00MHz spread 400MHz nominal/spread 333.33MHz nominal/spread 266.66MHz nominal/spread 200MHz nominal/spread 166.66MHz nominal/spread 133.33MHz nominal/spread 100.00MHz nominal/spread VOL = 0.175V, VOH = 0.525V VOH = 0.525V VOL = 0.175V -300 2.4993 2.4993 2.9991 2.9991 3.7489 3.7489 4.9985 4.9985 5.9982 5.9982 7.4978 7.4978 9.9970 9.9970 2.4143 2.9141 3.6639 4.8735 5.8732 7.3728 9.8720 175 175 300 2.5008 2.5133 3.0009 3.016 3.7511 3.77 5.0015 5.0266 6.0018 6.0320 7.5023 7.5400 10.0030 10.0533 700 700 125 125 55 50 50 Jitter, Cycle to cycle tJBYP Notes: Measurement from differential wavefrom PLL mode, from differential wavefrom Bypass mode as additive jitter 45 1.Guaranteed by design and characterization, not 100% tested in production. 2. All Long Term Accuracy and Clock Period specifications are guaranteed assuming that the input frequency meets CK410B accuracy requirements 3.IREF = VDD/(3xRR). For RR = 475Ω (1%), IREF = 2.32mA. IOH = 6 x IREF and VOH = 0.7V @ ZO=50Ω. 4. Measured into fixed 2 pF load cap. Input to output skew is measured at the first output edge following the corresponding input. 5. Measured from differential cross-point to differential cross-point 6. All Bypass Mode Input-to-Output specs refer to the timing between an input edge and the specific output edge created by it. IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 16 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Electrical Characteristics - Skew and Differential Jitter Parameters TA = 0 - 70° Supply Voltage VDD = 3.3 V +/-5% C; Group CLK_IN, DIF[x:0] CLK_IN, DIF[x:0] CLK_IN, DIF [x:0] CLK_IN, DIF [x:0] DIF[11:10] DIF[9:0] DIF[11:0] DIF[11:0] DIF[11:0] PLL Jitter Peaking PLL Jitter Peaking Parameter tSPO_PLL tPD_BYP ∆tSPO_PLL ∆tPD_BYP tSKEW_G2 tSKEW_G10 tSKEW_A12 tJPH tSSTERROR jpeak-hibw jpeak-lobw Description Input-to-Output Skew in PLL mode (1:1 only), nominal value @ 25° , 3.3V C Input-to-Output Skew in Bypass mode (1:1 only), nominal value @ 25° , 3.3V C Input-to-Output Skew Variation in PLL mode (over specified voltage / temperature operating ranges) Input-to-Output Skew Variation in Bypass mode (over specified voltage / temperature operating ranges) Output-to-Output Skew Group of 2 (Common to Bypass and PLL mode) Output-to-Output Skew Group of 10 (Common to Bypass and PLL mode) Output-to-Output Skew across all 12 outputs (Common to Bypass and PLL mode - all outputs at same gear) Differential Phase Jitter (RMS Value) Differential Spread Spectrum Tracking Error (peak to peak) (HIGH_BW# = 0) (HIGH_BW# = 1) (HIGH_BW# = 0) (HIGH_BW# = 1) Min -500 2.5 Typ 140 3.1 270 470 10 40 80 5 40 0 0 2 0.7 2 1.3 3.6 1.2 Max 500 4.5 |350| |500| 25 50 100 10 80 2.5 2 4 1.4 Units ps ns ps ps ps ps ps ps ps dB dB MHz MHz Notes 1,2,4,5,8, 12 1,2,3,5, 12 1,2,4,5,6, 10,12 1,2,3,4,5, 6,10,12 1,2,12 1,2,12 1,2,3,12 1,4,7,12 1,4,9,12 11,12 11,12 12,13 12,13 pllHIBW PLL Bandwidth pllLOBW PLL Bandwidth NOTES on Skew and Differential Jitter Parameters: 2. Measured from differential cross-point to differential cross-point 1. Measured into fixed 2 pF load cap. Input to output skew is measured at the first output edge following the corresponding input. 3. All Bypass Mode Input-to-Output specs refer to the timing between an input edge and the specific output edge created by it. 4. This parameter is deterministic for a given device 5. Measured with scope averaging on to find mean value. 6. Long-term variation from nominal of input-to-output skew over temperature and voltage for a single device. 7. This parameter is measured at the outputs of two separate 9FG1201H devices driven by a single CK410B+. The 9FG1201H must be set to high bandwidth. Differential phase jitter is the accumulation of the phase jitter not shared by the outputs (eg. not including the affects of spread spectrum). Target ranges of consideration are agents with BW of 1-22MHz and 11-33MHz. 8. t is the period of the input clock 9. Differential spread spectrum tracking error is the difference in spread spectrum tracking between two 9FG1201H devices This parameter is measured at the outputs of two separate 9FG1201H devices driven by a single CK410B+ in Spread Spectrum mode. The 9FG1201H must set to high bandwidth. The spread spectrum characterisitics are : maximum of 0.5%, 30 to 33KHz modulation frequency, linear profile. 10. This parameter is an absolute value. It is not a double-sided figure. 11. Measured as maximum pass band gain. At frequencies within the loop BW, highest point of magnification is called PLL jitter peaking. 12. Guaranteed by design and characterization, not 100% tested in production. 13. Measured at 3 db down or half power point. IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 17 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Electrical Characteristics - Phase Jitter PARAMETER SYMBOL tjphPCIe1 CONDITIONS PCIe Gen 1 REFCLK phase jitter (including PLL BW 8 - 16 MHz, ζ = 0.54, Td=10 ns, Ftrk=1.5 MHz ) PCIe Gen 2 REFCLK phase jitter (including PLL BW 8 - 16 MHz, ζ = 0.54, Td=12 ns) Lo-band content (10kHz to 1.5MHz) PCIe Gen 2 REFCLK phase jitter (including PLL BW 8 - 16 MHz, ζ = 0.54, Td=12 ns) Hi-band content (1.5MHz to Nyquist) FBD REFCLK phase jitter (including PLL BW 11 - 33 MHz, ζ = 0.54, Td=12 ns Ftrl=0.2MHz) FBD REFCLK phase jitter (including PLL BW 11 - 33 MHz, ζ = 0.54, Td=12 ns Ftrl=0.2MHz) MIN TYP. 40/38 MAX UNITS 86 ps NOTES 1,2,3,5 tjphPCIe2Lo 1.3/1.2 3 ps rms 1,2,5 Jitter, Phase tjphPCIe2Hi 3.0/2.4 3.1 ps rms 1,2,5 tjphFBD1_3.2G 2.8/2.3 3 ps (RMS) ps (RMS) 1,2,5 tjphFBD1_4.8G 2.3/1.9 2.5 1,2,5 Notes on Phase Jitter: See http://www.pcisig.com for complete specs. Guaranteed by design and characterization, not tested in production. 2 Device driven by 932S421BGLF or equivalent 3 -12 Sample size of at least 100K cycles. This figures extrapolates to 108ps pk-pk @ 1M cycles for a BER of 1 4 Hi-Bandwidth Number/Low Bandwidth Number with Spread On. Spread Off gives lower numbers. 5 Byte 8 must be properly set to meet these parameters. 1 IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 18 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD SRC Reference Clock Common Recommendations for Differential Routing Dimension or Value L1 length, route as non-coupled 50ohm trace 0.5 max L2 length, route as non-coupled 50ohm trace 0.2 max L3 length, route as non-coupled 50ohm trace 0.2 max Rs 33 Rt 49.9 Down Device Differential Routing L4 length, route as coupled microstrip 100ohm differential trace 2 min to 16 max L4 length, route as coupled stripline 100ohm differential trace 1.8 min to 14.4 max Differential Routing to PCI Express Connector L4 length, route as coupled microstrip 100ohm differential trace 0.25 to 14 max L4 length, route as coupled stripline 100ohm differential trace 0.225 min to 12.6 max Unit inch inch inch ohm ohm Figure 1 1 1 1 1 inch inch 1 1 inch inch 2 2 Figure 1: Down Device Routing L1 Rs L2 L4 L4' L1' Rs HCSL Output Buffer L2' Rt Rt PCI Express Down Device REF_CLK Input L3' L3 Figure 2: PCI Express Connector Routing L1 Rs L2 L4 L4' L1' Rs HCSL Output Buffer L2' Rt Rt PCI Express Add-in Board REF_CLK Input L3' L3 IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 19 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Alternative Termination for LVDS and other Common Differential Signals (figure 3) Vdiff Vp-p Vcm R1 R2 R3 R4 Note 0.45v 0.22v 1.08 33 150 100 100 0.58 0.28 0.6 33 78.7 137 100 0.80 0.40 0.6 33 78.7 none 100 ICS874003i-02 input compatible 0.60 0.3 1.2 33 174 140 100 Standard LVDS R1a = R1b = R1 R2a = R2b = R2 Figure 3 L1 R1a L2 R3 L4 L4' R4 L1' R1b HCSL Output Buffer L2' R2a R2b Down Device REF_CLK Input L3' L3 Cable Connected AC Coupled Application (figure 4) Component Value Note R5a, R5b 8.2K 5% R6a, R6b 1K 5% Cc 0.1 µF Vcm 0.350 volts Figure 4 3.3 Volts R5a Cc L4 L4' Cc R6a R5b R6b PCIe Device REF_CLK Input IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 20 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 56-Lead, 300 mil Body, 25 mil, SSOP N c SYMBOL L E1 INDEX AREA E 12 h x 45° D α A A A1 b c D E E1 e h L N α VARIATIONS N 56 In Millimeters COMMON DIMENSIONS MIN MAX 2.41 2.80 0.20 0.40 0.20 0.34 0.13 0.25 SEE VARIATIONS 10.03 10.68 7.40 7.60 0.635 BASIC 0.38 0.64 0.50 1.02 SEE VARIATIONS 0° 8° In Inches COMMON DIMENSIONS MIN MAX .095 .110 .008 .016 .008 .0135 .005 .010 SEE VARIATIONS .395 .420 .291 .299 0.025 BASIC .015 .025 .020 .040 SEE VARIATIONS 0° 8° A1 -Ce b SEATING PLANE .10 (.004) C D mm. MIN 18.31 MAX 18.55 MIN .720 D (inch) MAX .730 Reference Doc.: JEDEC Publication 95, MO-118 10-0034 IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 21 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD N c L E1 INDEX AREA E 12 a D A2 A1 A 56-Lead 6.10 mm. Body, 0.50 mm. Pitch TSSOP (240 mil) (20 mil) In Millimeters In Inches SYMBOL COMMON DIMENSIONS COMMON DIMENSIONS MIN MAX MIN MAX A -1.20 -.047 A1 0.05 0.15 .002 .006 A2 0.80 1.05 .032 .041 b 0.17 0.27 .007 .011 c 0.09 0.20 .0035 .008 SEE VARIATIONS SEE VARIATIONS D 8.10 BASIC 0.319 BASIC E E1 6.00 6.20 .236 .244 0.50 BASIC 0.020 BASIC e L 0.45 0.75 .018 .030 N SEE VARIATIONS SEE VARIATIONS α 0° 8° 0° 8° aaa -0.10 -.004 VARIATIONS N 56 10-0039 -Ce b SEATING PLANE aaa C D mm. MIN MAX 13.90 14.10 D (inch) MIN .547 MAX .555 Ref erence Doc.: JEDEC Publicat ion 95, M O-153 Ordering Information Part / Order Number 9FG1201HGLF 9FG1201HGLFT 9FG1201HFLF 9FG1201HFLFT Shipping/Packaging Tubes Tape and Reel Tubes Tape and Reel Package 56-pin TSSOP 56-pin TSSOP 56-pin SSOP 56-pin SSOP Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C "LF" denotes Pb free packaging, RoHS compliant "H" denotes revision designator (will not correlate with datasheet revision) IDTTM/ICSTM Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD 1371F — 09/23/09 22 ICS9FG1201H Frequency Gearing Clock for CPU, PCIe Gen1, Gen2, & FBD Revision History Rev. A B C D E F Issue Date 10/22/2007 1/29/2008 2/12/2008 9/24/2008 1/21/2009 9/23/2009 Description Release to Final. Updated Key Specifications: Changed units for DIF output-to-output skew to "ps". Changed Cin value from 6 pf to 5 pf. Added 1:1 VCO Programming Table Updated Skew and Phase Jitter tables. Updated Ordering Information table Page # 1 14 6 17,18 22 Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales 800-345-7015 408-284-8200 Fax: 408-284-2775 For Tech Support 408-284-6578 pcclockhelp@idt.com Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 (outside U.S.) Asia Pacific and Japan Integrated Device Technology Singapore (1997) Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339 TM © 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA 23