AV9155C

Integrated Circuit Systems, Inc. AV9155C Low Cost 20-Pin Frequency Generator General Description The AV9155C is a low cost frequency generator designed specifically for desktop and notebook PC applications with either 3.3V or 5.0V power supply voltage. Its CPU clocks provide all necessary CPU frequencies for 286, 386 and 486 systems, including support for the latest speeds of processors. The device uses a 14.318 MHz crystal to generate the CPU and all peripheral clocks for integrated desktop motherboards. The dual 14.318 MHz clock outputs allows one output for the system and one to be the input to an ICS graphics frequency generator such as the AV9194. The CPU clock offers the unique feature of smooth, glitchfree transitions from one frequency to the next, making this ideal device to use whenever slowing the CPU speed. The AV9155C makes a gradual transition between frequencies, so that it obeys the Intel cycle-to-cycle timing specification for 486 systems. The simultaneous 2X and 1X CPU clocks offer controlled skew to within 1.5ns (max) of each other. ICS offers several versions of the AV9155C. The different devices are shown below: PART AV9155C-01 AV9155C-02 AV9155C-23 AV9155C-36 DESCRIPTION Motherboard clock generator with 16 MHz BUS CLK Motherboard clock generator with 32 MHz BUS CLK Features a special 40 MHz SCSI clock Includes Pentium frequencies Features • • • Compatible with 286, 386, and 486 CPUs Supports turbo modes Generates communications clock, keyboard clock, floppy disk clock, system reference clock, bus clock and CPU clock Output enable tristates outputs Up to 100 MHz at 5V or 3.3V 20-pin DIP or SOIC All loop filter components internal Skew-controlled 2X and 1X CPU clocks Power-down option • • • • • • ICS has been shipping motherboard frequency generators since April 1990, and is the leader in the area of multiple output clocks on a single chip. The AV9155C is a third generation device, and uses ICS’s patented analog CMOS phase-locked loop technology for low phase jitter. ICS offers a broad family of frequency generators for motherboards, graphics and other applications, including cost-effective versions with only one or two output clocks. Consult ICS for all of your clock generation needs. Block Diagram AV9155C Rev F 12/13/00 Ô Pentium is a trademark of Intel Corporation. AV9155C Pin Configuration 20-Pin DIP or SOIC 20-Pin DIP or SOIC Pin Descriptions for AV9155C-01, -02 PIN NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PIN NAME 1.843 MHz X2 X1 VDD GND 16 MHz/32 MHz 24 MHz 12 MHz AGND OE FS2 PD# 14.318 MHz 14.318 MHz GND VDD 2XCPU CPU FS1 FS0 TYPE Output Output Input Output Output Output Input Input Input Output Output Output Output Input Input DESCRIPTION 1.84 MHz clock output. Crystal connection. Crystal connection. Digital power supply (3.3V or 5.0V). Digital Ground. 16 MHz (-01) or 32 MHz (-02) clock output. 24 MHz floppy disk/combination I/O clock output. 12 MHz keyboard clock output. Analog ground (original version). Output enable. Tristates all outputs when low. (Has internal pull-up.) CPU clock frequency select #2. (Has internal pull-up.) Power-down. Shuts off entire chip when low. (Has internal pull-up.) 14.318 MHz reference clock output. 14.318 MHz reference clock output. Digital ground. Digital power supply (3.3V or 5.0V). 2X CPU clock output. 1X CPU clock output. CPU clock frequency select #1. (Has internal pull-up.) CPU clock frequency select #0. (Has internal pull-up.) 2 AV9155C Functionality - AV9155C-01 (Using 14.318 MHz input. All frequencies in MHz.) CLOCK#2 CPU and 2XCPU FS2 (Pin 11) 0 0 0 0 1 1 1 1 FS1 (Pin 19) 0 0 1 1 0 0 1 1 FS0 (Pin 20) 0 1 0 1 0 1 0 1 2XCPU (Pin 17) 8 16 32 40 50 66.66 80* 100* CPU (Pin 18) 4 8 16 20 25 33.33 40* 50* PERIPHERAL CLOCKS COMMCLK (Pin 1) 1.843 BUSCLK (Pin 6) 16 FDCLK (Pin 7) 24 KBCLK (Pin 8) 12 REFERENCE CLOCKS REFCLK1 (Pin 13) 14.318 REFCLK2 (Pin 14) 14.318 *VDD minimum 3.15V. Functionality - AV9155C-02 (Using 14.318 MHz input. All frequencies in MHz.) CLOCK#2 CPU and 2XCPU FS2 (Pin 11) 0 0 0 0 1 1 1 1 FS1 (Pin 19) 0 0 1 1 0 0 1 1 FS0 (Pin 20) 0 1 0 1 0 1 0 1 2XCPU (Pin 17) 8 16 32 40 50 66.66 80* 100* CPU (Pin 18) 4 8 16 20 25 33.33 40* 50* PERIPHERAL CLOCKS COMMCLK (Pin 1) 1.843 BUSCLK (Pin 6) 32 FDCLK (Pin 7) 24 KBCLK (Pin 8) 12 REFERENCE CLOCKS REFCLK1 (Pin 13) 14.318 REFCLK2 (Pin 14) 14.318 * VDD minimum 3.15V Frequency Transitions A key feature of the AV9155C is its ability to provide smooth, glitch-free frequency transitions on the CPU and 2XCPU clocks when the frequency select pins are changed. These frequency transitions do not violate the Intel 486 specification of less than 0.1% frequency change per clock period. Using an Input Clock as Reference The AV9155C is designed to accept a 14.318 MHz crystal as the input reference. With some external changes, it is possible to use a crystal oscillator or clock input. Please see application note AN04 for details on driving the AV9155C with a clock. 3 AV9155C Pin Configuration 20-Pin DIP or SOIC 20-Pin DIP or SOIC Pin Descriptions for AV9155C-23, -36 PIN NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 X2 X1 VDD GND 16 MHz/15 MHz 24 MHz 12 MHz AGND OE FS2 PD# 14.318 MHz 14.318 MHz GND VDD 2XCPU CPU FS1 FS0 PIN NAME 1.843/40 MHz TYPE Output Output Input Output Output Output Input Input Input Output Output Output Output Input Input DESCRIPTION 1.84 MHz (-23)/40 MHz SCSI (-36) clock output. Crystal connection. Crystal connection. Digital power supply (3.3V or 5.0V). Digital ground. 16 MHz (-23)/15 MHz (-36) clock output. 24 MHz floppy disk/combination I/O clock output. 12 MHz keyboard clock output. Analog ground (original version). Output enable. Tristates all outputs when low. (Has internal pull-up.) CPU clock frequency select #2. (-23 has internal pull-up.) Power-down. Shuts off entire chip when low. (Has internal pull-up.) 14.318 MHz reference clock output. 14.318 MHz reference clock output. Digital ground. Digital power supply (3.3V or 5.0V). 2X CPU clock output. 1X CPU clock output. CPU clock frequency select #1. (-23 has internal pull-up.) CPU clock frequency select #0. (-23 has internal pull-up.) 4 AV9155C Functionality - AV9155C-23 (Using 14.318 MHz input. All frequencies in MHz.) CLOCK#2 CPU and 2XCPU FS2 (Pin 11) 0 0 0 0 1 1 1 1 FS1 (Pin 19) 0 0 1 1 0 0 1 1 FS0 (Pin 20) 0 1 0 1 0 1 0 1 2XCPU (Pin 17) 75* 32 60 40 50 66.66 80* 52 CPU (Pin 18) 37.5* 16 30 20 25 33.33 40* 26 PERIPHERAL CLOCKS COMMCLK (Pin 1) 1.843 BUSCLK (Pin 6) 16 FDCLK (Pin 7) 24 KBCLK (Pin 8) 12 REFERENCE CLOCKS REFCLK1 (Pin 13) 14.318 REFCLK2 (Pin 14) 14.318 *VDD minimum 3.15V Functionality - AV9155C-36 (Using 14.318 MHz input. All frequencies in MHz.) CLOCK#2 CPU and 2XCPU FS2 (Pin 11) 0 0 0 0 1 1 1 1 FS1 (Pin 19) 0 0 1 1 0 0 1 1 FS0 (Pin 20) 0 1 0 1 0 1 0 1 2XCPU (Pin 17) 8 16 60 40 50 66.66 80* 100* CPU (Pin 18) 4 8 30 20 25 33.33 40* 50* PERIPHERAL CLOCKS SCSICLK (Pin 1) 40 BUSCLK (Pin 6) 15 FDCLK (Pin 7) 24 KBCLK (Pin 8) 12 REFERENCE CLOCKS REFCLK1 (Pin 13) 14.318 REFCLK2 (Pin 14) 14.318 *VDD minimum 3.15V 5 AV9155C Absolute Maximum Ratings VDD referenced to GND . . . . . . . . . . . . . . . . . . . . . . 7V Voltage on I/O pins referenced to GND. . . . . . . . . . . GND -0.5V to VDD +0.5V Operating temperature under bias. . . . . . . . . . . . . . . . 0°C to +70°C Power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 Watts Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +150°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. Electrical Characteristics at 5V VDD = 4.0 to 5.5V (5V +10%/-20%); TA=0°C to 70°C unless otherwise stated DC Characteristics PARAMETER Input Low Voltage Input High Voltage Input High Voltage, PD# Input Low Current Input High Current Output Low Voltage Output High Voltage Output Low Current Output High Current Supply Current Supply Current, Power-down Output Frequency Change over Supply and Temperature 1 Short circuit current Input Capacitance Load Capacitance Pull-up Resistor 1 1 1 1 1 1 1 SYMBOL VIL VIH VIHPD IIL IIH VOL VOH IOL IOH IDD IDDPD FD ISC CI CL Rpu TEST CONDITIONS VDD=5V VDD=5V VDD=5V, for PD# input VIN=0V (pull-up pin) VIN=VDD IOL=8mA IOH=-25mA VOL=0.8 VOH=2.0V Unloaded, 66 MHz SCLKx=000 PD#=0 With respect to typical frequency Each output clock Except X1, X2 Pins X1, X2 at VIN=VDD-1V MIN 2.0 2.2 -5 2.4 15 25 120 TYP 16 0 0.15 3.7 32 -48 38 0.7 0.002 40 20 350 MAX 0.8 35 5 0.4 -30 60 1.5 0.01 10 700 UNITS V V V µA µA V V mA mA mA mA % mA pF pF k ohm Notes: 1 Parameter is guaranteed by design and characterization, not subject to production testing. 6 AV9155C Electrical Characteristics at 5V VDD = 4.0 to 5.5V (5V +10%/-20%); TA=0°C to 70°C unless otherwise stated AC Characteristics PARAMETER Input Clock Rise Time 1 Input Clock Fall Time Output Rise time Rise time 1 1 1 SYMBOL tICr tICf tr tr TEST CONDITIONS MIN - TYP 1.5 2.0 1.0 1.3 48/52 43 0.8 MAX 20 20 2 4.0 2.0 3.0 55/45 50 2.0 UNITS ns ns ns ns ns ns % % % 25pF load, 0.8 to 2.0V 25pF load, 20% to 80% VDD 25pF load, 2.0 to 0.8V 25pF load, 80% to 20% VDD 25pF load at 1.4V 25pF load at 1.4V 10,000 cycles 45/55 36 - Output Fall time Fall time 1 Duty cycle 1 1 1 tf tf dt dt tjls1 Duty cycle, reference clocks Jitter, one sigma 1 , 20 to 50 MHz clocks 1 on CPU and 40 to 100 MHz on 2XCPU Jitter, one sigma 1 , fixed clock & clocks below 20 MHz on CPU, below 40 MHz on 2XCPU Jitter, absolute 1 , 20 to 50 MHz clocks 1 on CPU and 40 to 100 MHz on 2XCPU Jitter, absolute 1 , fixed clock & clocks below 20 MHz on CPU, below 40 MHz on 2XCPU Input Frequency 1 tjls2 10,000 cycles - 0.8 2.0 % tjab1 10,000 cycles -4.0 2.0 4.0 % tjab2 fin fout Tsk ttPO 10,000 cycles -5.0 2 2.0 14.318 220 140 8 6.5 1.8 2.5 5.0 32 % MHz MHz Maximum Output Frequency 1 Clock skew between CPU and 2XCPU outputs 1 Power-up Time 1 1 at 2XCPU 100 - 400 15 12 3.2 5.0 ps ms ms ms ms to 66 MHz from 8 to 66.66 MH from 32 to 80 MHz from 80 to 32 MHz - Frequency Transition Time tft Notes: 1 Parameter is guaranteed by design and characterization, not subject to production testing. 7 AV9155C Electrical Characteristics at 3.3V VDD =3.0V to 3.7V, TA=0°C to 70°C unless otherwise stated DC Characteristics PARAMETER Input Low Voltage Input High Voltage Input High Voltage, PD# Input Low Current Input High Current Output Low Voltage Output High Voltage Output Low Current Output High Current Supply Current Supply Current, Power-down Output Frequency Change over Supply and Temperature 1 Short circuit current Input Capacitance Load Capacitance Pull-up Resistor 1 1 1 1 1 1 1 SYMBOL VIL VIH VIHPD IIL IIH VOL VOH IOL IOH IDD IDDPD FD ISC CI CL Rpu TEST CONDITIONS VDD=3.3V VDD=3.3V VDD=3.3V, for PD# input VIN=0V (pull-up pin) VIN=VDD IOL=4mA IOH=-3.5mA VOL=0.2VDD VOH=0.7VDD Unloaded, 66.6 MHz SCLKx=000 PD#=0 With respect to typical frequency Each output clock Except X1, X2 Pins X1, X2 at VIN=VDD-1V MIN 0.7VDD 2.2 -5 12 20 120 TYP 11 0 0.05VDD 0.94VDD 22 -11 28 0.25 0.002 30 20 330 MAX 0.2VDD 25 5 0.1VDD -6.5 45 0.5 0.01 10 650 UNITS V V V µA µA V V mA mA mA mA % mA pF pF k ohm Notes: 1 Parameter is guaranteed by design and characterization, not subject to production testing. 8 AV9155C Electrical Characteristics at 3.3V VDD = +3.3V±10%, TA=0°C to 70°C unless otherwise stated AC Characteristics PARAMETER Input Clock Rise Time Input Clock Fall Time Rise time 1 Fall time 1 Duty cycle 1 1 1 1 SYMBOL tICr tICf tr tf dt dt tjls1 tjab1 fin 1,2 TEST CONDITIONS MIN - TYP 3.0 1.8 48 36 0.8 2.0 14.318 140 220 6 6 MAX 20 20 4.0 2.5 60 67 2.5 5.0 32 500 12 12 UNITS ns ns ns ns % % % % Mhz MHz ps ms ms 25pF load, 20% to 80% VDD 25pF load, 80% to 20% VDD 25pF load at 50% VDD 25pF load at 50% VDD 10,000 cycles 10,000 cycles at 2XCPU 40 33 -5.0 2 7 100 Duty cycle, reference clocks Jitter, one sigma Jitter, absolute 1 1 1 Input Frequency Maximum Output Frequency fout Tsk ttPO Clock skew between CPU and 2XCPU outputs 1 Power-up Time 1 Frequency Transition Time 1 to 66 MHz from 8 to 50.0 MHz - tft Notes: 1 Parameter is guaranteed by design and characterization, not subject to production testing. 2 Output frequencies on 2XCPU of 80 or 100 MHz require minimum VDD of 3.15V (3.3 -5%). 9 AV9155C Actual Output Frequencies (Using 14.318 MHz input. All frequencies in MHz.) AV9155C-01 and AV9155C-02 CLOCK#2 CPU and 2XCPU FS2 (Pin 11) 0 0 0 0 1 1 1 1 FS1 (Pin 19) 0 0 1 1 0 0 1 1 FS0 (Pin 20) 0 1 0 1 0 1 0 1 2XCPU (Pin 17) 7.50 15.51 32.22 40.09 50.11 66.82 80.18 100.23 CPU (Pin 18) 3.75 7.76 16.11 20.05 25.06 33.41 40.09 50.11 AV9155C-23 CPU CLOCK FS2 (Pin 11) 0 0 0 0 1 1 1 1 FS1 (Pin 19) 0 0 1 1 0 0 1 1 FS0 (Pin 20) 0 1 0 1 0 1 0 1 2XCPU (Pin 17) 75.170 31.940 60.136 40.090 50.113 66.476 80.181 51.903 CPU (Pin 18) 37.585* 15.970 30.068 20.045 25.057 33.238 40.091 25.952 PERIPHERAL CLOCKS COMMCLK (Pin 1) 1.846 BUSCLK (Pin 6) 32.01 or 16.00 FDCLK (Pin 7) 24.00 KBCLK (Pin 8) 12.00 PERIPHERAL CLOCKS COMMCLK (Pin 1) 1.846 BUSCLK (Pin 6) 16.00 FDCLK (Pin 7) 24.00 KBCLK (Pin 8) 12.00 AV9155C-36 CPU CLOCK FS2 (Pin 11) 0 0 0 0 1 1 1 1 FS1 (Pin 19) 0 0 1 1 0 0 1 1 FS0 (Pin 20) 0 1 0 1 0 1 0 1 2XCPU (Pin 17) 8.054 16.002 59.875 39.886 50.113 66.476 80.181 100.226 CPU (Pin 18) 4.027 8.001 29.936 19.943 25.057 33.238 40.091 50.113 PERIPHERAL CLOCKS COMMCLK BUSCLK (Pin 1) (Pin 7) 40.00 15.00 FDCLK (Pin 6) 24.00 KBCLK (Pin 8) 12.00 10 AV9155C AV9155C Recommended External Circuit Notes: 1. ICS recommends the use of an isolated ground plane for the AV9155C. All grounds shown on this drawing should be connected to this ground plane. This ground plane should be connected to the system ground plane at a single point. Please refer to AV9155C Board Layout Diagram. 2. A single power supply connection for all VDD lines at the 2.2µF decoupling capacitor is recommended to reduce interaction of analog and digital circuits. The 0.1µF decoupling capacitors should be located as close to each VDD pin as possible. 3. A 33Ω series termination resistor should be used on any clock output which drives more than one load or drives a long trace (more than about two inches), especially when using high frequencies (>50 MHz). This termination resistor is put in series with the clock output line close to the clock output. It helps improve jitter performance and reduce EMI by damping standing waves caused by impedance mismatches in the output clock circuit trace. 4. The ferrite bead does not enhance the performance of the AV9155C, but will reduce EMI radiation from the VDD line. 11 AV9155C AV9155C Recommended Board Layout This is the recommended layout for the AV9155C to maximize clock performance. Shown are the power and ground connections, the ground plane, and the input/output traces. Use of the isolated ground plane and power connection, as shown, will prevent stray high frequency ground and system noise from propagating through the device. When compared to using the system ground and power planes, this technique will minimize output clock jitter. The isolated ground plane should be connected to the system ground plane at one point, near the 2.2µF decoupling cap. For lowest jitter performance, this isolated ground plane should be kept away from clock output pins and traces. Keeping the isolated ground plane area as small as possible will minimize EMI radiation. Use a sufficient gap between the isolated ground plane and system ground plane to prevent AC coupling. The ferrite bead in the VDD line optional, but will help reduce EMI. The traces to distribute the output clocks should be over a system ground or power supply plane. The trace width should be about two times the thickness of the PC board between the trace and the underlying plane. These guidelines help minimize clock jitter and EMI radiation. The traces to distribute power should be as wide as possible. 12 AV9155C 20-Pin DIP Package Ordering Information AV9155C-02CN20, AV9155C-23CN20, AV9155C-36CN20 Example: ICS XXXX-PPP M X#W Lead Count & Package Width Lead Count=1, 2 or 3 digits W=.3” SOIC or .6” DIP; None=Standard Width Package Type N=DIP (Plastic#) T&R=Tape and Reel Pattern Number (2 or 3 digit number for parts with ROM code patterns) Device Type (consists of 3 or 4 digit numbers) Prefix ICS, AV=Standard Device Notes: Tape and reel packaging should be ordered with the suffix T&R. For instance, if the -01 in DIP and tape & reel is required, order the part as AV9155C-01CN20T&R. 13 AV9155C LEAD COUNT DIMENSION L 14L 0.354 16L 0.404 18L 0.454 20L 0.504 24L 0.604 28L 0.704 32L 0.804 Ordering Information AV9155C-01CW20, AV9155C-02CM20, AV9155C-23CM20, AV9155C-36CM20 Example: ICS XXXX-PPP M X#W Lead Count & Package Width Lead Count=1, 2 or 3 digits W=.3” SOIC or .6” DIP; None=Standard Width Package Type W=SOIC T&R=Tape and Reel Pattern Number (2 or 3 digit number for parts with ROM code patterns) Device Type (consists of 3 or 4 digit numbers) Prefix ICS, AV=Standard Device 14