IDT5V926APGI

Single Output Clock Generator IDT5V926A DATA SHEET FEATURES: • 3V to 3.6V operating voltage • 48MHz to 160MHz output frequency range • Input from fundamental crystal oscillator or external source • Internal PLL feedback (loading the feedback output relative to the other outputs, will adjust the propagation delay between REF inputs and outputs) • Select inputs (S[1:0]) for FB divide selection (multiply ratio of 2, 3, 4, 4.25, 5, 6, 6.25, and 8) • Low jitter • PLL bypass for testing and power-down control (S1 = H, S0 = H, powers part down 125MHz QREF Output/Duty Cycle VT = VDDQ/2 FOUT = 106.25MHz tJ fOUT Cycle - Cycle Jitter FOUT = 125MHz FOUT = 155.52MHz Output Frequency INPUT TIMING REQUIREMENTS Symbol tR, tF tPWC DH fOSC fIN NOTES: 1. Where pulse width implied by DH is less than the tPWC limit, tPWC limit applies. 2. When using a clock input. Description(1) Maximum input rise and fall time, 0.8V to 2V(2) Input clock pulse, HIGH or LOW(2) Input duty cycle(2) XTAL oscillator frequency Input frequency(2) Min. — 2 10 10 48/N Max. 10 — 90 40 160/N Unit ns/V ns % MHz MHz DT5V926A REVISION A JUNE 11, 2009 4 ©2009 Integrated Device Technology, Inc. IDT5V926A Data Sheet SINGLE OUTPUT CLOCK GENERATOR PARAMETER MEASUREMENT INFORMATION 1.65V±0.15V VDD, VDDQ SCOPE QOUT LVCMOS GND t cycle n ➤ t jit(cc) = |t cycle n – t cycle n+1| 1000 Cycles -1.65V±0.15V 3.3V CORE/3.3V OUTPUT LOAD AC TEST CIRCUIT CYCLE-TO-CYCLE JITTER 2V 0.8V tR 2V 0.8V tF QREF, QOUT t PW t PERIOD QREF, QOUT odc = t PW t PERIOD OUTPUT RISE/FALL TIME OUTPUT DUTY CYCLE/PULSE WIDTH/PERIOD DT5V926A REVISION A JUNE 11, 2009 5 ©2009 Integrated Device Technology, Inc. ➤ V DD ➤ Qx t cycle n+1 ➤ 2 x 100% IDT5V926A SINGLE OUTPUT CLOCK GENERATOR PRELIMINARY ORDERING INFORMATION IDT XXXX Device Type X Package X Process I PG PGG 5V926A -40°C to +85C° (Industrial) Thin Shrink Small Outline Package TSSOP - Green Single Output Clock Generator Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales 800-345-7015 (inside USA) +408-284-8200 (outside USA) Fax: 408-284-2775 www.IDT.com/go/contactIDT For Tech Support netcom@idt.com +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 (inside USA) +408-284-8200 (outside USA) © 2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA