IDT6168

CMOS Static RAM 16K (4K x 4-Bit) Features High-speed (equal access and cycle time) – Military: 25/45ns (max.) – Industrial: 25ns (max.) – Commercial: 15/20/25ns (max.) Low power consumption Battery backup operation—2V data retention voltage (IDT6168LA only) Available in high-density 20-pin ceramic or plastic DIP and 20-pin leadless chip carrier (LCC) Produced with advanced CMOS high-performance technology CMOS process virtually eliminates alpha particle soft-error rates Bidirectional data input and output Military product compliant to MIL-STD-883, Class B IDT6168SA IDT6168LA x x x x x x x x Description The IDT6168 is a 16,384-bit high-speed static RAM organized as 4K x 4. It is fabricated using lDT’s high-performance, high-reliability CMOS technology. This state-of-the-art technology, combined with innovative circuit design techniques, provides a cost-effective approach for high-speed memory applications. Access times as fast 15ns are available. The circuit also offers a reduced power standby mode. When CS goes HIGH, the circuit will automatically go to, and remain in, a standby mode as long as CS remains HIGH. This capability provides significant system-level power and cooling savings. The low-power (LA) version also offers a battery backup data retention capability where the circuit typically consumes only 1µW operating off a 2V battery. All inputs and outputs of the IDT6168 are TTL-compatible and operate from a single 5V supply. The IDT6168 is packaged in either a space saving 20-pin, 300-mil ceramic or plastic DIP or a 20-pin LCC providing high board-level packing densities. Military grade product is manufactured in compliance with the latest revision of MIL-STD-883, Class B, making it ideally suited to military temperature applications demanding the highest level of performance and reliability. Functional Block Diagram A0 VCC GND ADDRESS DECODER A11 16,384-BIT MEMORY ARRAY I/O0 I/O1 I/O2 I/O3 I/O CONTROL INPUT DATA CONTROL , CS WE 3090 drw 01 FEBRUARY 2001 1 ©2000 Integrated Device Technology, Inc. DSC-3090/05 IDT6168SA/LA CMOS Static RAM 16K (4K x 4-Bit) Military, Industrial, and Co mmercial Temperature Ranges Pin Configurations A0 A1 A2 A3 A4 A5 A6 A7 CS GND 1 2 3 4 5 6 7 8 9 10 20 19 18 Truth Table(1) Mode CS H L L WE X H L Output High-Z DOUT DIN Power Standby Active Active 3090 tbl 03 VCC A11 A10 A9 A8 I/O3 I/O2 I/O1 I/O0 WE 3090 drw 02 Standby Read Write P20-1 D20-1 L20-1 17 16 15 14 13 12 11 NOTE: 1. H = VIH, L = VIL, X = Don't Care Absolute Maximum Ratings(1) Symbol Rating Terminal Voltage with Respect to GND Operating Temperature Temperature Under Bias Storage Temperature Power Dissipation DC Output Current Com'l. -0.5 to +7.0 Mil. -0.5 to +7.0 Unit V , VTERM DIP/LCC Top View TA TBIAS TSTG PT 0 to +70 -55 to +125 -55 to +125 1.0 50 -55 to +125 -65 to +135 -65 to +150 1.0 50 o C C C o o W mA 3090 tbl 04 Pin Descriptions Name A0 - A11 CS WE I/O0 - I/O3 VCC GND Description Address Inputs Chip Select Write Enable Data Input/Output Power Ground 3090 tbl 01 IOUT NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Recommended DC Operating Conditions Symbol VCC GND Parameter Supply Voltage Ground Input High Voltage Input Low Voltage Min. 4.5 0 2.2 -0.5(1) Typ. 5.0 0 ____ Max. 5.5 0 6.0 0.8 Unit V V V V 3090 tbl 05 Capacitance (TA = +25°C, f = 1.0MHz) Symbol CIN CI/O Parameter(1) Input Capacitance I/O Capacitance Conditions VIN = 0V VOUT = 0V Max. 7 7 Unit pF pF 3090 tbl 02 VIH VIL ____ NOTE: 1. VIL (min.) = –3.0V for pulse width less than 20ns, once per cycle. NOTE: 1. This parameter is determined by device characterization, but is not production tested. Recommended Operating Temperature and Supply Voltage Grade Military Industrial Commercial Temperature -55 C to +125 C -45OC to +85OC 0OC to +70OC O O GND 0V 0V 0V Vcc 5V ± 10% 5V ± 10% 5V ± 10% 3090 tbl 06 2 IDT6168SA/LA CMOS Static RAM 16K (4K x 4-Bit) Military, Industrial, and Co mmercial Temperature Ranges DC Electrical Characteristics(1) (VCC = 5.0V ± 10%, VLC = 0.2V, V HC = VCC - 0.2V) 6168SA15 Power Symbol ICC1 Parameter Operating Power Supply Current CS < VIL, Outputs Open V CC = Max., f = 0(2) Dynamic Operating Current CS < VIL, Outputs Open V CC = Max., f = fMAX(2) Standby Power Supply Current (TTL Level) CS > VIH, Outputs Open V CC = Max., f = fMAX(2) Full Standby Power Supply Current (CMOS Level) CS > VHC, VCC = Max., V IN < VLC o r VIN > VHC, f = 0(2) SA LA SA LA SA LA SA LA 110 ____ ____ 6168SA20 6168LA20 Com'l. 90 70 120 100 45 30 20 0.5 Mil. ____ 6168SA25 6168LA25 Com'l. & Ind. 90 70 110 90 35 25 3 0.5 Mil. 100 80 120 100 45 30 10 0.3 6168SA45 6168LA45 Com'l. ____ Com'l. Mil. Mil. Unit 100 80 110 80 35 25 10 0.3 3090 tbl 07 mA ____ ____ ____ ICC2 145 ____ ____ ____ ____ mA ____ ____ ____ ISB 55 ____ ____ ____ ____ mA ____ ____ ____ ISB1 20 ____ ____ ____ ____ mA ____ ____ ____ NOTES: 1. All values are maximum guaranteed values. 2. fMAX = 1/tRC, only address inputs are cycling at fMAX. f = 0 means no address inputs are changing. DC Electrical Characteristics VCC = 5.0V ± 10% Symbol |ILI| |ILO| VOL IDT6168SA Parameter Input Leakage Current Output Leakage Current Output LOW Voltage Test Conditions VCC = Max., VIN = GND to VCC VCC = Max., CS = VIH, VOUT = GND to V CC IOL = 10mA, VCC = Min. IOL = 8mA, VCC = Min. VOH Output HIGH Voltage IOH = -4mA, VCC = Min. MIL. COM'L. MIL. COM'L. Min. ____ ____ IDT6168LA Min. ____ ____ Max. 10 2 10 2 0.5 0.4 ____ Max. 5 2 5 2 0.5 0.4 ____ Unit µA µA V ____ ____ ____ ____ ____ ____ ____ ____ 2.4 2.4 V 3090 tbl 09 6.42 3 IDT6168SA/LA CMOS Static RAM 16K (4K x 4-Bit) Military, Industrial, and Co mmercial Temperature Ranges Data Retention Characteristics VLC = 0.2V, VHC = VCC – 0.2V Symbol V DR ICCDR Parameter V CC for Data Retention Data Retention Current (LA Version Only) IDT6168LA Test Condition Min. 2.0 MIL. ____ ____ Typ.(1) ____ Max. ____ Unit V µA µA ns ns 3090 tbl 10 CS > VHC VIN > VHC or < VLC tCDR(5) tR(5) Chip Deselect to Data Retention Time Operation Recovery Time 0.5(2) 1.0(3) 0.5(2) 1.0(3) ____ 100(2) 150(3) 20(2) 30(3) ____ COM'L. ____ ____ 0 tRC(4) ____ ____ NOTES: 1. TA = +25°C. 2. at VCC = 2V 3. at VCC = 3V 4. tRC = Read Cycle Time. 5. This parameter is guaranteed by device characterization, but is not production tested. Low VCC Data Retention Waveform VCC tCDR CS VIH 4.5V DATA RETENTION MODE 4.5V VDR ≥ 2V VDR VIH 3090 drw 03 tR , AC Test Conditions Input Pulse Levels Input Rise/Fall Times Input Timing Reference Levels Output Reference Levels AC Test Load GND to 3.0V 5ns 1.5V 1.5V See Figures 1 and 2 3090 tbl 11 5V 480Ω DATA OUT 255Ω 30pF* DATA OUT 255Ω 5V 480Ω 5pF* 3090 drw 04 3090 drw 05 Figure 1. AC Test Load *Includes scope and jig capacitances Figure 2. AC Test Load (for tCHZ, tCLZ, tWHZ and tOW) 4 IDT6168SA/LA CMOS Static RAM 16K (4K x 4-Bit) Military, Industrial, and Co mmercial Temperature Ranges AC Electrical Characteristics (VCC = 5.0V ± 10%, All Temperature Ranges) 6168SA15(1) Min. Max. 6168SA20(1) 6168LA20(1) Min. Max. 6168SA25 6168LA25 Min. Max. 6168SA45(2) 6168LA45(2) Min. Max. Unit Symbol Parameter Read Cycle tRC tAA tACS tCLZ(3) tCHZ(3) tOH tPU(3) tPD(3) Read Cycle Time Address Access Time Chip Select Access Time Chip Select to Output in Low-Z Chip Desele ct to Output in High-Z Output Hold from Address Change Chip Sele ct to Power Up Time Chip Deselect to Power Down Time 15 ____ ____ 20 ____ ____ 25 ____ ____ 45 ____ ____ ns ns ns ns ns ns ns ns 3090 tbl 12 15 15 ____ 20 20 ____ 25 25 ____ 45 45 ____ ____ ____ ____ ____ 3 ____ 5 ____ 5 ____ 5 ____ 8 ____ 10 ____ 10 ____ 25 ____ 3 0 ____ 3 0 ____ 3 0 ____ 3 0 ____ ____ ____ ____ ____ 35 20 25 40 NOTES: 1. 0° to +70°C temperature range only. 2. –55°C to +125°C temperature range only. 3. This parameter is guaranteed with AC Test load (Figure 2) by device characterization, but is not production tested. Timing Waveform of Read Cycle No. 1(1, 2) tRC ADDRESS tAA tOH DATAOUT PREVIOUS DATA VALID DATA VALID 3090 drw 06 , Timing Waveform of Read Cycle No. 2(1, 3) tRC CS tACS tCHZ (3) DATAOUT VALID HIGH IMPEDANCE tCLZ (4) DATAOUT HIGH IMPEDANCE tPU tPD VCC SUPPLY CURRENT ICC ISB 3090 drw 07 , NOTES: 1. WE is HIGH for Read cycle. 2. CS is LOW for Read cycle. 3. Device is continuously selected, CS is LOW. 3. Address valid prior to or coincident with CS transition LOW. 4. Transition is measured ±200mV from steady state. 6.42 5 IDT6168SA/LA CMOS Static RAM 16K (4K x 4-Bit) Military, Industrial, and Co mmercial Temperature Ranges AC Electrical Characteristics (VCC = 5.0V ± 10%, All Temperature Ranges) 6168SA15(1) Symbol Parameter Min. Max. 6168SA20(1) 6168LA20(1) Min. Max. 6168SA25 6168LA25 Min. Max. 6168SA45(2) 6168LA45(2) Min. Max. Unit Write Cycle tWC tCW tAW tAS tWP tWR tDW tDH tWHZ(3) tOW(3) Write Cycle Time Chip Select to End-of-Write Address Valid to End-of-Write Address Set-up Time Write Pulse Width Write Recovery Time Data to Valid to End-of-Write Data Hold Time Write Enable to Output in High-Z Output Active from End-of-Write 15 15 15 0 15 0 9 0 ____ ____ ____ 20 20 20 0 20 0 10 0 ____ ____ ____ 20 20 20 0 20 0 10 0 ____ ____ ____ 40 40 40 0 40 0 20 3 ____ ____ ____ ns ns ns ns ns ns ns ns ns ns 3090 tbl 13 ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ 6 ____ 7 ____ 7 ____ 20 ____ 0 0 0 0 NOTES: 1. 0° to +70°C temperature range only. 2. –55°C to +125°C temperature range only. 3. This parameter is guaranteed with the AC Load (Figure 2) by device characterization, but is not production tested. 6 IDT6168SA/LA CMOS Static RAM 16K (4K x 4-Bit) Military, Industrial, and Co mmercial Temperature Ranges Timing Waveform of Write Cycle No. 1 (WE Controlled Timing)(1,2,5) t WC ADDRESS t AW CS t AS WE t WHZ DATAOUT (6) t WP t WR (3) t OW (4) (6) t CHZ DATA (4) VALID (6) PREVIOUS DATA VALID t DW DATAIN t DH , DATA VALID 3090 drw 08 Timing Waveform of Write Cycle No. 2 (CS Controlled Timing)(1,2,5) t WC ADDRESS t AW CS tAS WE t DW DATAIN DATA VALID 3090 drw 09 t CW tWR (3) t DH , NOTES: 1. WE or CS must be HIGH during all address transitions. 2. A write occurs during the overlap of a LOW CS and a LOW WE. 3. tWR is measured from the earlier of CS or WE going HIGH to the end of the write cycle. 4. During this period, the I/O pins are in the output state and input signals should not be applied. 5. If the CS LOW transition occurs simultaneously with or after the WE LOW transition, the outputs remain in the high impedance state. 6. Transition is measured ±200mV from steady state. 6.42 7 IDT6168SA/LA CMOS Static RAM 16K (4K x 4-Bit) Military, Industrial, and Co mmercial Temperature Ranges Ordering Information -- Commercial & Industrial IDT 6168 Device Type XX Power XXX Speed XX Package X Process/ Temperature Range Blank I Commercial (0°C to +70°C) Industrial (-45°C to +85°C) P 300mil Plastic DIP (P20-1) (Commercial & Industrial only) 15* 20 25 Commercial Only Commercial Only Commercial &Industrial Speed in nanoseconds SA LA Standard Power Low Power 3090 drw 10 *Standard power only. Ordering Information -- Military IDT 6168 Device Type XX Power XXX Speed XX Package X Process/ Temperature Range B Military (-55°C to +125°C) Compliant to MIL-STD-883, Class B D L 300mil Ceramic DIP (D20-1) 20-pin Leadless Chip Carrier (L20-1) 25 45 Speed in nanoseconds SA LA Standard Power Low Power 3090 drw 10a *Standard power only. 8 IDT6168SA/LA CMOS Static RAM 16K (4K x 4-Bit) Military, Industrial, and Co mmercial Temperature Ranges Datasheet Document History 11/22/99 Pg. 8 Pg. 1, 2, 3, 5, 6, 8 Pg. 1, 2, 8 Updated to new format Added Datasheet Document History Added Industrial Temperature range offerings Revised package offerings Not recommended for new designs Removed "Not recommended for new designs" 01/07/00 08/09/00 02/01/01 CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 for SALES: 800-345-7015 or 408-727-6116 fax:408-492-8674 www.idt.com 6.42 9 for Tech Support: sramhelp@idt.com 800 544-7726, x4033 The IDT logo is a registered trademark of Integrated Device Technology, Inc.