MPC9109

Freescale Semiconductor Technical Data DATA PC9109 M SHEET Rev. 2, 08/2005 Low Voltage 1:18 Clock Distribution Low Voltage 1:18 Clock Chip MPC9109 Distribution Chip MPC9109 The MPC9109 is a 1:18 low voltage clock distribution chip with 2.5 V or 3.3 V LVCMOS output capabilities. The device features the capability to select either a differential LVPECL or an LVCMOS compatible input. The 18 outputs are 2.5 V or 3.3 V LVCMOS compatible and feature the drive strength to drive 50 Ω series or parallel terminated transmission lines. With output-to-output skews of 200 ps, the MPC9109 is ideal as a clock distribution chip for the most demanding of synchronous systems. The 2.5 V outputs also make the device ideal for supplying clocks for a high performance Pentium II™ microprocessor based design. For a higher performance version of the 9109 refer to the MPC940L data sheet. Features • • • • • • LVPECL or LVCMOS clock input 2.5 V LVCMOS outputs for Pentium II microprocessor support 200 ps maximum output-to-output skew @ 3.3 V output Maximum output frequency of 250 MHz @ 3.3 V core 32-lead QFP packaging Dual or single supply device: • Dual VCC supply voltage, 3.3 V core and 2.5 V output • Single 3.3 V VCC supply voltage for 3.3 V outputs • Single 2.5 V VCC supply voltage for 2.5 V I/O LOW VOLTAGE 1:18 CLOCK DISTRIBUTION CHIP FA SUFFIX 32-LEAD LQFP PACKAGE CASE 873A-04 Functional Description AC SUFFIX 32-LEAD LQFP PACKAGE Pb-FREE PACKAGE CASE 873A-04 With a low output impedance (≈20 Ω), in both the HIGH and LOW logic states, the output buffers of the MPC9109 are ideal for driving series terminated transmission lines. With a 20 Ω output impedance the 9109 has the capability of driving two series terminated lines from each output. This gives the device an effective fanout of 1:36. If a lower output impedance is desired please see the MPC942 data sheet. If better performance is desired please see the MPC940L data sheet. The differential LVPECL inputs of the MPC9109 allow the device to interface directly with a LVPECL fanout buffer like the MC100EP111 to build very wide clock fanout trees or to couple to a high frequency clock source. The LVCMOS input provides a more standard interface for applications requiring only a single clock distribution chip at relatively low frequencies. In addition, the two clock sources can be used to provide for a test clock interface as well as the primary system clock. A logic HIGH on the LVCMOS_CLK_Sel pin will select the LVCMOS level clock input. All inputs of the MPC9109 have internal pullup/pulldown resistor so they can be left open if unused. The MPC9109 is a single or dual supply device. The device power supply offers a high degree of flexibility. The device can operate with a 3.3 V core and 3.3 V output, a 3.3 V core and 2.5 V outputs as well as a 2.5 V core and 2.5 V outputs. The 32lead QFP package was chosen to optimize performance, board space and cost of the device. The 32-lead TQFP has a 7x7mm body size with a conservative 0.8 mm pin spacing. Pentium II is a trademark of Intel Corporation. IDT™ Low Voltage 1:18 Clock Distribution Chip MPC9109 1 © Freescale Semiconductor, Inc., 2005. All acquired by Integrated Device Technology, Inc Freescale Timing Solutions Organization has been rights reserved. MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM PECL_CLK PECL_CLK LVCMOS_CLK LVCMOS_CLK_Sel (INTERNAL PULLDOWN) 0 1 16 Q0 Q1–Q16 Q17 Figure 1. Logic Diagram 24 GNDO Q5 Q4 Q3 VCCO Q2 Q1 Q0 25 26 27 28 29 30 31 32 1 23 22 21 20 19 18 GND 17 16 15 14 VCCO Q12 Q13 Q14 GNDO Q15 Q16 Q17 VCCI Q10 Q11 Q6 Q7 Q8 Q9 Table 1. Function Table LVCMOS CLK_Sel 0 1 Input PECL_CLK LVCMOS_CLK MPC9109 13 12 11 10 9 Table 2. Power Supply Voltages Supply Pin VCCI VCCO Voltage Level 2.5 V or 3.3 V ± 5% 2.5 V or 3.3 V ± 5% 2 3 4 5 6 7 8 LVCMOS_CLK_Sel GNDI GNDO LVCMOS_CLK PECL_CLK PECL_CLK VCCI Figure 2. Pinout: 32-Lead TQFP (Top View) MPC9109 IDT™ Low Voltage 1:18 Clock Distribution Chip Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 2 2 VCCO MPC9109 Advanced Clock Drivers Devices Freescale Semiconductor MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM Table 3. Absolute Maximum Ratings(1) Symbol VCC VI IIN TStor Supply Voltage Input Voltage Input Current Storage Temperature Range –40 Parameter Min –0.3 –0.3 Max 3.6 VCC + 0.3 ±20 125 Unit V V mA °C 1. Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. Table 4. DC Characteristics (TA = 0° to 70°C, VCCI = 3.3 V ± 5%; VCCO = 3.3 V ± 5%) Symbol VIH VIL VPP VCMR VOH VOL IIN CIN Cpd ZOUT ICC Characteristic Input HIGH Voltage Input LOW Voltage Peak-to-Peak Input Voltage Common Mode Range Output HIGH Voltage Output LOW Voltage Input Current Input Capacitance Power Dissipation Capacitance Output Impedance Maximum Quiescent Supply Current 18 4.0 10 23 0.5 28 CMOS_CLK CMOS_CLK PECL_CLK PECL_CLK 500 VCC–1.4 2.4 0.5 ±200 Min 2.4 Typ Max VCCI 0.8 1000 VCC–0.6 Unit V V mV V V V µA pF pF Ω mA Per output IOH = –20 mA IOH = 20 mA Condition Table 5. AC Characteristics (TA = 0° to 70°C, VCCI = 3.3 V ± 5%; VCCO = 3.3 V ± 5%) Symbol Fmax tPLH tsk(o) tsk(pr) dt tr, tf Characteristic Maximum Input Frequency Propagation Delay Output-to-Output Skew Part-to-Part Skew Duty Cycle Output Rise/Fall Time PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK 45 0.1 1.8 1.6 2.8 2.5 Min Typ Max 250 3.8 3.3 200 200 2.0 1.7 55 1.3 Unit MHz ns ps ns % ns Note(1) Note(1) Note(1) Note(1) Note(1) Condition 1. Guaranteed by statistical analysis, not 100% tested in production. IDT™ Low Voltage 1:18 Clock Distribution Chip MPC9109 MPC9109 3 A Timing Clock Drivers Devices FreescaledvancedSolutions Organization has been acquired by Integrated Device Technology, Inc Freescale Semiconductor 3 MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM Table 6. Absolute Maximum Ratings(1) Symbol VCC VI IIN TStor Supply Voltage Input Voltage Input Current Storage Temperature Range –40 Parameter Min –0.3 –0.3 Max 3.6 VCC + 0.3 ±20 125 Unit V V mA °C 1. Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. Table 7. DC Characteristics (TA = 0° to 70°C, VCCI = 3.3 V ± 5%; VCCO = 2.5 V ± 5%) Symbol VIH VIL VPP VCMR VOH VOL IIN CIN Cpd ZOUT ICC Characteristic Input HIGH Voltage Input LOW Voltage Peak-to-Peak Input Voltage Common Mode Range Output HIGH Voltage Output LOW Voltage Input Current Input Capacitance Power Dissipation Capacitance Output Impedance Maximum Quiescent Supply Current 4.0 10 23 0.5 CMOS_CLK CMOS_CLK PECL_CLK PECL_CLK 500 VCC–1.4 1.8 0.5 ±200 Min 2.4 Typ Max VCCI 0.8 1000 VCC–0.6 Unit V V mV V V V µA pF pF Ω mA Per output IOH = –20 mA IOH = 20 mA Condition Table 8. AC Characteristics (TA = 0° to 70°C, VCCI = 3.3 V ± 5%; VCCO = 2.5 V ± 5%) Symbol Fmax tPLH tsk(o) tsk(pr) dt tr, tf Characteristic Maximum Input Frequency Propagation Delay Output-to-Output Skew Part-to-Part Skew Duty Cycle Output Rise/Fall Time PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK 45 0.1 1.8 1.6 2.8 2.5 Min Typ Max 250 3.9 3.4 250 250 2.1 1.8 55 1.3 Unit MHz ns ps ns % ns Note(1) Note(1) Note(1) Note(1) Note(1) Condition 1. Guaranteed by statistical analysis, not 100% tested in production. MPC9109 IDT™ Low Voltage 1:18 Clock Distribution Chip Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 4 4 MPC9109 Advanced Clock Drivers Devices Freescale Semiconductor MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM Table 9. Absolute Maximum Ratings(1) Symbol VCC VI IIN TStor Supply Voltage Input Voltage Input Current Storage Temperature Range –40 Parameter Min –0.3 –0.3 Max 3.6 VCC + 0.3 ±20 125 Unit V V mA °C 1. Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. Table 10. DC Characteristics (TA = 0° to 70°C, VCCI = 2.5 V ± 5%; VCCO = 2.5 V ± 5%) Symbol VIH VIL VPP VCMR VOH VOL IIN CIN Cpd ZOUT ICC Characteristic Input HIGH Voltage Input LOW Voltage Peak-to-Peak Input Voltage Common Mode Range Output HIGH Voltage Output LOW Voltage Input Current Input Capacitance Power Dissipation Capacitance Output Impedance Maximum Quiescent Supply Current 18 4.0 10 23 0.5 28 CMOS_CLK CMOS_CLK PECL_CLK PECL_CLK 500 VCC–1.0 1.8 0.5 ±200 Min 2.0 Typ Max VCCI 0.8 1000 VCC–0.6 Unit V V mV V V V µA pF pF Ω mA Per output IOH = –12 mA IOH = 12 mA Condition Table 11. AC Characteristics (TA = 0° to 70°C, VCCI = 2.5 V ± 5%; VCCO = 2.5 V ± 5%) Symbol Fmax tPLH tsk(o) tsk(pr) dt tr, tf Characteristic Maximum Input Frequency Propagation Delay Output-to-Output Skew Part-to-Part Skew Duty Cycle Output Rise/Fall Time PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK 45 0.1 2.2 2.0 2.8 2.5 Min Typ Max 200 4.9 4.2 250 250 2.7 2.2 55 1.3 Unit MHz ns ps ns % ns Note(1) Note(1) Note(1) Note(1) Note(1) Condition 1. Guaranteed by statistical analysis, not 100% tested in production. IDT™ Low Voltage 1:18 Clock Distribution Chip MPC9109 MPC9109 5 A Timing Clock Drivers Devices FreescaledvancedSolutions Organization has been acquired by Integrated Device Technology, Inc Freescale Semiconductor 5 MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM PACKAGE DIMENSIONS PAGE 1 OF 3 CASE 873A-04 ISSUE C 32-LEAD LQFP PACKAGE MPC9109 IDT™ Low Voltage 1:18 Clock Distribution Chip Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 6 6 MPC9109 Advanced Clock Drivers Devices Freescale Semiconductor MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM PACKAGE DIMENSIONS PAGE 2 OF 3 CASE 873A-04 ISSUE C 32-LEAD LQFP PACKAGE IDT™ Low Voltage 1:18 Clock Distribution Chip MPC9109 MPC9109 7 A Timing Clock Drivers Devices FreescaledvancedSolutions Organization has been acquired by Integrated Device Technology, Inc Freescale Semiconductor 7 MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM PACKAGE DIMENSIONS PAGE 3 OF 3 CASE 873A-04 ISSUE C 32-LEAD LQFP PACKAGE MPC9109 IDT™ Low Voltage 1:18 Clock Distribution Chip Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 8 8 MPC9109 Advanced Clock Drivers Devices Freescale Semiconductor MPC9109 MPC92459 PART NUMBERS Low Voltage 1:18 Clock Distribution Chip 900 MHzPRODUCT NAME AND DOCUMENT TITLE INSERT Low Voltage LVDS Clock Synthesizer NETCOM NETCOM Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales 800-345-7015 408-284-8200 Fax: 408-284-2775 For Tech Support netcom@idt.com 480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 (outside U.S.) Asia Pacific and Japan Integrated Device Technology Singapore (1997) Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339 © 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA XX-XXXX-XXXXX