334MMR400K

MMR • Bypass • Coupling Operating Temperature Range Capacitance Tolerance Rated Voltage VDC VAC Small Size Epoxy Dipped Radial Lead Metallized Polyester Film Capacitors • • Filtering Blocking -40°C to +105°C ±10% at 1kHz, 20°C 100 63 250 150 400 200 630 220 For T> +85°C the applied voltage must be decreased by 1.25% per °C Dissipation Factor (max) at 20°C Insulation Resistance @20°C(0.33 µF Dissipation factor 1.0% 1.5% Insulation Resistance 9,000 MΩ 3,000 MΩ x µF 2,000 hours at 125% of rated VDC and at 85°C Capacitance Change ≤5% change from initial value. ≤0.005 at 1kHz and 25°C ≥50%of mimimum specification Load Life Test Dissipation Factor Insulation Resistance 1000 hours at +40°C±2°C with 93% ±2%relative humidity Capacitance Change ≤5% change from initial value. ≤0.005 at 1kHz and 25°C ≥50%of minimum specification ≤1 nH/mm along the capacitor pitch and lead wire length. 160% of rated WVDC for 2 seconds at 20°C between the leads. ≤1.0% up to 40°C after 2 years +400 ppm/°C, ± 200ppm/°C Polyester Vacuum deposited metal layers Extended metallized carrier film Damp Heat Test Dissipation Factor Insulation Resistance Self-inductance Dielectric Strength Capacitance Drift Factor Temperature Coefficient Dielectric Electrodes Construction Leads Coating Tinned copper wire Flame retardant epoxy sealed resin (UL 94V-O) ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 162 MMR Small Size Epoxy Dipped Radial Lead Metallized Polyester Capacitors STANDARD PART LISTING Capacitance (µF) WVDC PART NUMBER 103MMR250K 103MMR400K 103MMR630K 153MMR250K 153MMR400K 153MMR630K 223MMR250K 223MMR400K 223MMR630K 333MMR250K 333MMR400K 333MMR630K 473MMR250K 473MMR400K 473MMR630K 683MMR250K 683MMR400K 683MMR630K 104MMR250K dv/dt (v/µs) Capacitance (µF) 0.10 0.10 0.15 0.15 0.15 0.22 0.22 0.22 0.33 0.33 0.33 0.47 0.47 0.47 0.68 0.68 0.68 1.0 1.0 WVDC PART NUMBER 104MMR400K 104MMR630K 154MMR250K 154MMR400K 154MMR630K 224MMR250K 224MMR400K 224MMR630K 334MMR250K 334MMR400K 334MMR630K 474MMR250K 474MMR400K 474MMR630K 684MMR250K 684MMR400K 684MMR630K 105MMR100K 105MMR250K dv/dt (v/µs) Capacitance (µF) 1.0 1.0 1.5 1.5 1.5 1.5 2.2 2.2 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10.0 10.0 WVDC PART NUMBER 105MMR400K 105MMR630K 155MMR100K 155MMR250K 155MMR400K 155MMR630K 225MMR100K 225MMR250K 225MMR400K 225MMR630K 335MMR100K 335MMR250K 475MMR100K 475MMR250K 685MMR100K 685MMR250K 106MMR100K 106MMR250K dv/dt (v/µs) 0.01 0.01 0.01 0.015 0.015 0.015 0.022 0.022 0.022 0.033 0.033 0.033 0.047 0.047 0.047 0.068 0.068 0.068 0.100 250 400 630 250 400 630 250 400 630 250 400 630 250 400 630 250 400 630 250 80 190 200 80 190 200 80 190 200 80 190 200 80 160 200 80 160 90 80 400 630 250 400 630 250 400 630 250 400 630 250 400 630 250 400 630 100 250 160 90 80 65 90 110 65 90 110 65 35 45 65 35 45 30 35 30 45 400 630 100 250 400 630 100 250 400 630 100 250 100 250 100 250 100 250 30 30 20 45 25 30 20 20 25 30 20 20 10 20 10 15 10 15 PHYSICAL DIMENSIONS WVDC (VAC) µF 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 12x14x7 18.5x13.5x6 18.5x15x7 18.5x16.5x8.5 26x17x7.5 26x18.5x9 26x21x11.5 100 (63) 250 (150) 10.5x7.5x4.5 10.5x7.5x4.5 10.5x7.5x4.5 10.5x7.5x4.5 10.5x7.5x4.5 10.5x7.5x4.5 10.5x8.5x6 10.5x11x6 12x10.5x5.5 12x12x6.5 18.5x12.5x5.5 18.5x13.5x6 18.5x15x7.5 18.5x17x9 26x16.5x8.5 26x18x10.5 26x21.5x12 31x22.5x13 31x26x16 400 (200) 10.5x7.5x4.5 10.5x7.5x4.5 10.5x8x5 10.5x9x6 12x8.5x5 12x10.5x5.5 12x12x6.5 18.5x12.5x5 18.5x13x6 18.5x15x7 18.5x17x8 26x16.5x7 26x18x8.5 31x19x9.5 31x22x11 630 (220) 12x7.5x4.5 12x8.5x5 12x10.5x5.5 12x12x6 12x13.5x6.5 18.5x11x6 18.5x14x6.5 18.5x15.5x7.5 18.5x16.5x9 26x17x8 26x18.5x9.5 26x21x11.5 31x22x12.5 31x25x15.5 31x29x19.5 L max T max H max Film Capacitors G 15 min. d ± 0.05 S WVDC Capacitance Lead Dia. Range (µF) d Meniscus G Max. 100 C≤6.8 C>6.8 C≤0.47 0.68≤C≤2.2 C>2.2 C≤0.22 0.33≤C≤1.5 C>1.5 C≤0.1 0.15≤C≤0.47 C>0.47 0.8 0.8 0.6 0.8 0.8 0.6 0.8 0.8 0.6 0.8 0.8 1.0 1.5 1.0 1.0 1.5 1.0 1.0 1.5 1.0 1.0 1.5 mm 250 400 630 Lead Spacing L LxHxT(mm) 10.5 7.5 12 10.0 18.5 15.0 26 22.5 (S ± 1.0mm) 31 27.5 Convert to inches, divide by 25.4 S ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 163