IL3T-HX5F12.5-32.768KHZ

IL3T Series Applications: Real Time Clocks Metering Industrial Control Time Reference Product Feature: Low Cost SMD Package Pb Free/ RoSH Compliant Ultra-Low Profile Frequency 32.768 kHz Equivalent Series Resistance (ESR) 90 kΩ Maximum (-40°C to +85°C Option) Shunt Capacitance (Co) 110 kΩ Maximum (-40°C to +125°C Option) 0.9 ~ 1.2pF Typical Frequency Tolerance @ 25°C ±5ºC ±20 ppm (See Options) Frequency Stability over Temperature Turnover point Parabolic, -0.03 ppm / ° C2 ± 0.01 ppm / ° C2 +25º ±5ºC Mode of Operation Crystal Cut Load Capacitance Flexural Mode (Tuning Fork) Tuning Fork 12.5pF (See Options) Drive Level 0.1 μW Typical, 0.5 μW Maximum Aging (@25°C± 3°C) ±2 ppm Max. / First Year Q Value 90000 Min Operating Temperature Range -40° C to +85° C (See Options) Storage Temperature Range -55° C to +125° C Insulation Resistance 500 Mohms Minimum (at 100Vdc +/-15Vdc) Part Number Guide Package Stability(ppm) at Room Temperature Sample Part Number: Stability (ppm) over Operating Temperature J = ±10ppm IL3T - H = ±20ppm F = ±30ppm Revised C: 12/10/20 IL3T – HX5F12.5- 32.768kHz Operating Temperature Mode (overtone) 5 = -40°C to +85°C X = X Cut F = Fundamental 6 = -40°C to +125°C Page 2 of 10 Load Capacitance (pF) 4= 4pF 6 = 6pF 7 = 7pF 9 = 9pF 12.5 = 12.5pF (or Specify) Frequency -32.768 kHz www.ilsiamerica.com IL3T Series Typical X Cut Temperature Coefficient: Pb Free Solder Reflow Profile: Ts max to TL (Ramp-up Rate) Preheat Temperature min (Ts min) Temperature typ (Ts typ) Temperature max (Ts max) Time (Ts) Ramp-up Tate (TL to Tp Time Maintained Above Temperature (TL) Time (TL) Peak Temperature (Tp) Time within 5ºC to Peak Temperature (Tp) Ramp-down Rate Tune 25ºC to Peak Temperature 3ºC / second max 150ºC 175ºC 200ºC 60 to180 seconds 3ºC / second max 217ºC 60 to 150 seconds 260ºC max for 10 seconds 20 to 40 seconds 6ºC / second max 8 minutes max Units are backward compatible with 240°C reflow processes Package Information: MSL = 1 Termination = e1 (Sn/Cu/Ag over Ni over Kovar base metal) Note: Due to material availability, the outline and finish color of the component may vary. This variation in no way affects the electrical performance of the product. Tape and Reel Information: Quantity per Reel A B C D E F 3000 8.0 ±0.2 4.0 ±0.1 3.5 ±0.05 9±0.3 60 / 80 180 / 250 Dimensions: mm Revised C: 12/10/20 Page 3 of 10 www.ilsiamerica.com IL3T Series Environmental Specifications: Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance Revised C: 12/10/20 MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Page 4 of 10 www.ilsiamerica.com