IL3X-HX5F12.5-32.768KHZ

Engineering/Process Change Notice ECN/PCN No.: 3919 For Manufacturer Product Description: 32.768kHz SMD Crystal Abracon Part Number / Part Series: IL3X Affected Revision: New Revision: J ☐ Documentation only ☐ ECN ☒ EOL Application: EOL ☒ Series ☐ Part Number ☐ Safety ☒ Non-Safety Prior to Change: IL3X Rev. J https://abracon.com/datasheets/ILSI/IL3X.pdf After Change: Removal of OE option. EOL Cause/Reason for Change: Discontinuation of this older product package type and associated manufacturing capability. Change Plan Effective Date: Additional Remarks: 8/9/2021 Change Declaration: EOL of glass seal/ceramic cover, transition to seam seal/metal cover. Issued Date: Issued By: 8/9/2021 Approval: Issued Department: Engineering Stephanie López Approval: Thomas Culhane Engineering Director Approval: Reuben Quintanilla Quality Director Ying Huang Purchasing Director For Abracon EOL only Last Time Buy (if applicable): None Alternate Part Number / Part Series: IL3X2 https://abracon.com/datasheets/ILSI/IL3X2.pdf Additional Approval: Additional Approval: Additional Approval: Customer Approval (If Applicable) Qualification Status: ☐ Approved ☐ Not accepted Note: It is considered approved if there is no feedback from the customer 1 month after ECN/PCN is released. Customer Part Number: Company Name: Customer Project: Company Representative: Customer Remarks: Form #7020 | Rev. G | Effective: 02/22/2021 | Page 1 of 1 Representative Signature: IL3X Series Product Features: Applications: ±10ppm Tolerance Available Glass Sealed, Ceramic SMD Package Low Profile RoHS Compliant (Exemption 7(c)-I) Real Time Clock Source Metering Industrial Control Time Reference Electrical Specifications: 32.768kHz Equivalent Series Resistance 65 k Ohms Maximum Shunt Capacitance (C0) 1.7pF Typical, 2.0pF Maximum Frequency Tolerance (at 25°C) ±10ppm or ±20ppm Frequency Stability (over Temperature) -0.034ppm/(Change in °C)2 Typical Turn over Temperature 25°C ±5°C Mode of Operation Fundamental Crystal Cut X-Cut (Tuning Fork) Load Capacitance 6pF, 7pF, 9pF, 12.5pF or Specify Drive Level 1µWatt Maximum Aging ±3ppm/Year Maximum Operating Temperature Range -40°C to +85°C Storage Temperature Range -40°C to +85°C EO L Frequency Mechanical and Solder Pad Dimensions: Part Number Guide Package Frequency Tolerance IL3X- J = ±10ppm H = ±20ppm Revised J: 07/19/19 Frequency Stability X = X Cut Sample Part Number: IL3X – HX5F12.5 – 32.768 kHz Operating Mode of Load Capacitance Temperature Operations Range 5 = -40°C to +85°C F = Fundamental 6 = 6pF 7 = 7pF 9 = 9pF 12.5 = 12.5pF (or Specify) Page 2 of 6 Frequency - 32.768 kHz www.ilsiamerica.com IL3X Series Pb Free Solder Reflow Profile: Ts max to TL (Ramp-up Rate) Preheat Temperature min (Ts min) Temperature typ (Ts typ) Temperature max (Ts max) Time (Ts) Ramp-up Rate (TL to Tp) Time Maintained Above Temperature (TL) Time (TL) Peak Temperature (Tp) Time within 5ºC to Peak Temperature (Tp) Ramp-down Rate Tune 25ºC to Peak Temperature 3ºC / second max 150ºC 175ºC 200ºC 60 to180 seconds 3ºC / second max 217ºC 60 to 150 seconds 260ºC max for 10 seconds 20 to 40 seconds 6ºC / second max 8 minutes max EO L Units are backward compatible with +240°C reflow processes Package Information: MSL = 1 (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e4 (Au over Ni over W base metallization). Cover: Ceramic Glass Seal Tape and Reel Information: PITCH TAPE WIDTH REEL DIA QTY PER REEL Revised J: 07/19/19 Page 3 of 6 4.00 12.00 180 3,000 www.ilsiamerica.com