ISA16-3FBH-50.000MHZ

Automotive Grade, 4 Pad 2.0mm x 1.6mm SMD, LVCMOS Oscillator ISA11 Series Product Features: Typical Applications: ● ● ● ● ● ● ● ● ● ● ● ● AEC-Q200 qualified TS16949 certified production lines LVCMOS compatible output Industry-standard package 2.0mm x 1.6mm Five supply voltages options, 1.8V, 2.5V, 2.8V, 3.0V or 3.3V Pb-free, Halogen-free, and Antimony-free RoHS and REACH compliant Navigation, GPS Infotainment System Instrument Panel, Ethernet ADAS, Camera, Engine Control Units LIDAR Systems, TPMS ELECTRICAL SPECIFICATIONS Frequency Range 2.5MHz to 60MHz Frequency Stability ±50ppm Maximum ±100ppm Maximum Inclusive of Initial Tolerance, Stability over Operating Temperature Range, Load (±5%), Voltage (±10%), and Aging (First Year at +25°C) Input Current -40°C to +85°C -40°C to +105°C -40°C to +125°C 1.8V 2.5V, 2.8V, 3.0V or 3.3V 20mA Maximum Output Logic Type LVCMOS Output Drive Capability 15pF Maximum Aging ±3ppm/year Maximum at +25°C Duty Cycle 50 ±5(%) Measured at 50% of waveform Rise / Fall Time 6nSec Maximum Measured from 20% to 80% of waveform Output Voltage Logic High 90% of Vdd Minimum Output Voltage Logic Low 10% of Vdd Maximum Input Voltage Logic High 70% of Vdd Minimum or No Connect to Enable Output Input Voltage Logic Low 30% of Vdd Maximum to Disable Output (High Impedance) Standby Current 10µA Maximum Operating Temperature Range Supply Voltage (Vdd) ±5% ±10% No Load Disabled Output, High Impedance Startup Time 10mSec Maximum 5pSec Maximum Vdd = 2.5V, 2.8V, 3.0V or 3.3V RMS Period Jitter 6pSec Maximum Vdd = 1.8V 30pSec Maximum Vdd = 2.5V, 2.8V, 3.0V or 3.3V Peak-to-Peak Period Jitter 40pSec Maximum Vdd = 1.8V NOTES: ● All minimum and maximum limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated. ● A 0.1µF bypass capacitor is recommended between Vdd (pad 4) and GND (pad 2) to minimize power supply noise. ABSOLUTE MAXIMUM LIMITS Storage Temperature Range -55°C to +125°C Supply Voltage Range -0.3Vdc to Vdd +0.3Vdc Electrostatic Discharge 2000V Maximum Solder Temperature 260°C Maximum Junction Temperature 150°C Maximum NOTE: If the part is used beyond absolute maximum ratings, it may cause internal destruction. The part should be used under the recommended operating conditions or the reliability of this part may be damaged if those conditions are exceeded. PART NUMBER GUIDE Series Supply Voltage Operating Temperature Range Frequency Stability Function Frequency ISA11- 1 = 1.8V 6 = 2.5V 2 = 2.8V 7 = 3.0V 3 = 3.3V 2 = -40°C to +85°C E = -40°C to +105°C F = -40°C to +125°C A = ±25ppm B = ±50ppm C = ±100ppm H = Output Enable -25.000 MHz Sample Part Number: ISA11-3FCH-25.000 MHz NOTES: ● Not all Frequency Stability options are available at all frequency and Operating Temperature Ranges. ● Please consult with Sales Department any other parameters or options. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev: 03/06/18_A Page 1 of 3 Automotive Grade, 4 Pad 2.0mm x 1.6mm SMD, LVCMOS Oscillator ISA11 Series MECHANICAL & SOLDER PAD LAYOUT DIMENSIONS MARKING PACKAGE INFORMATION Line 1: Frequency (X.XXX or XX.XX) Line 2: Date Code (YWW) Termination = e4 (Au over Ni over W base metallization Terminal Plating Thickness: Gold (0.3µm to 1.0µm), Nickel (1.27µm to 8.89µm) Pin 1 Dot ENVIRONMENTAL SPECIFICATIONS Mechanical Shock MIL-STD-202, Method 213 Mechanical Vibration MIL-STD-202, Method 204 Resistance to Soldering Heat MIL-STD-202, Method 210 Solderability J-STD-002 Gross Leak MIL-STD-883, Method 1014 Fine Leak MIL-STD-883, Method 1014 Moisture Sensitivity Level MSL 1 (+260°C) TAPE & REEL DIMENSIONS PITCH TAPE WIDTH REEL DIA QTY PER REEL 4.00 8.00 180 3,000 All Dimensions in Millimeters TEST CIRCUIT ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev: 03/06/18_A Page 2 of 3 Automotive Grade, 4 Pad 2.0mm x 1.6mm SMD, LVCMOS Oscillator ISA11 Series WAVEFORM SOLDER REFLOW PROFILE Ts max to TL (Ramp-up Rate) Preheat Temperature min (Ts min) Temperature typ (Ts typ) Temperature max (Ts max) Time (Ts) Ramp-up Tate (TL to Tp Time Maintained Above Temperature (TL) Time (TL) Peak Temperature (Tp) Units are backward compatible with +240°C reflow process Time within 5ºC to Peak Temperature (Tp) Ramp-down Rate Tune 25ºC to Peak Temperature Moisture Sensitivity Level (MSL) 3ºC / second max 150ºC 175ºC 200ºC 60 to180 seconds 3ºC / second max 217ºC 60 to 150 seconds 260ºC max for 10 seconds 20 to 40 seconds 6ºC / second max 8 minute max Level 1 PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev: 03/06/18_A Page 3 of 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ABRACON: ISA11-32AH-20.000MHz ISA11-32AH-24.000MHz ISA11-32AH-25.000MHz ISA11-32AH-27.000MHz ISA11-32AH28.63636MHz ISA11-3FBH-60.000MHz ISA11-3FBH-25.000MHz ISA11-3FBH-27.000MHz ISA11-3FBH28.63636MHz ISA11-3FBH-40.000MHz ISA11-3FBH-48.000MHz ISA11-3FBH-50.000MHz ISA11-32AH-40.000MHz ISA11-32AH-48.000MHz ISA11-32AH-50.000MHz ISA11-32AH-60.000MHz ISA11-3FBH-20.000MHz ISA11-3FBH24.000MHz ISA16-3FBH-50.000MHz ISA16-3FBH-60.000MHz ISA16-3FBH-24.000MHz ISA16-3FBH-26.000MHz ISA16-3FBH-28.63636MHz ISA16-3FBH-30.000MHz ISA16-32AH-24.000MHz ISA16-32AH-26.000MHz ISA16-32AH28.63636MHz ISA16-32AH-30.000MHz ISA16-32AH-50.000MHz ISA20-32AH-50.000MHz ISA20-3FBH-50.000MHz