BA595_07

BA595/BA885/BA895... Silicon PIN Diode • Current-controlled RF resistor for switching and attenuating applications • Frequency range 1 MHz ... 2 GHz • Especially useful as antenna switch in TV-sat tuners • Very low harmonics • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BA595 BA895 BA885 !   Type BA595 BA885 BA895 Package SOD323 SOT23 SCD80 Configuration single single single LS(nH) 1.8 1.8 0.8 Marking white R PA RA Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Diode reverse voltage Forward current Junction temperature Operating temperature range Storage temperature Thermal Resistance Parameter Junction - soldering point2) BA595, BA885 BA895 1Pb-containing 2For Symbol VR IF Tj Top Tstg Value 50 50 150 -55 ... 125 -55 ... 150 Unit V mA °C Symbol RthJS Value ≤ 370 ≤ 95 Unit K/W package may be available upon special request calculation of RthJA please refer to Application Note Thermal Resistance 1 2007-04-19 BA595/BA885/BA895... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter DC Characteristics Reverse current VR = 30 V Forward voltage IF = 50 mA AC Characteristics Diode capacitance VR = 0 V, f = 100 MHz VR = 10 V, f = 1 MHz Reverse parallel resistance VR = 1 V, f = 100 MHz VR = 0 V, f = 1 GHz Forward resistance I F = 1.5 mA, f = 100 MHz I F = 10 mA, f = 100 MHz Charge carrier life time I F = 10 mA, IR = 6 mA, measured at IR = 3 mA , RL = 100 Ω I-region width WI 130 µm τ rr rf 22 4.5 1600 40 7 ns RP 50 10 Ω CT 0.26 0.22 0.4 0.6 kΩ pF Symbol min. IR VF - Values typ. max. 20 1.1 Unit nA V 2 2007-04-19 BA595/BA885/BA895... Diode capacitance CT = ƒ (VR) f = Parameter Forward resistance rf = ƒ (I F) f = Parameter 10 3 rf Ω BA 885 EHD07016 0.5 pF 0.4 0.35 CT 1 MHz 100 MHz 1 GHz 10 2 0.3 0.25 0.2 10 1 0.15 0.1 0.05 0 0 5 10 15 20 V 30 10 0 10 -1 10 0 10 1 mA 10 2 VR ΙF Forward current IF = ƒ (VF) TA = Parameter 10 0 mA Forward current IF = ƒ (T S) BA595 60 mA 10 -1 50 45 10 -2 40 IF IF 35 10 -3 30 25 10 -4 -40°C +25°C +85°C +125°C 20 15 10 5 10 -5 10 -6 0 0.2 0.4 0.6 0.8 1 °C 1.3 0 0 15 30 45 60 75 90 105 120 °C 150 TS TS 3 2007-04-19 BA595/BA885/BA895... Forward current IF = ƒ (T S) BA895 Permissible Puls Load R thJS = ƒ (tp) BA595 10 3 60 mA K/W 50 45 R thJS 40 10 2 IF 35 30 25 20 15 10 5 0 0 15 30 45 60 75 90 105 120 °C 150 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 TS tp Permissible Pulse Load IFmax / I FDC = ƒ (tp ) BA595 10 1 Permissible Puls Load R thJS = ƒ (tp) BA595 10 3 K/W IFmax/IFDC - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 RthJS 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 -5 -4 -3 -2 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 10 0 -6 10 10 10 10 10 s 10 0 tp tp 4 2007-04-19 BA595/BA885/BA895... Permissible Pulse Load IFmax / I FDC = ƒ (tp ) BA895 10 1 I Fmax/IFDC - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 5 2007-04-19 Package SCD80 BA595/BA885/BA895... Package Outline 0.2 0.8 ±0.1 10˚MAX. M A +0.05 0.13 -0.03 A 7˚ ±1.5˚ 1.3 ±0.1 2 1.7 ±0.1 0.7 ±0.1 Foot Print 1.45 0.35 Marking Layout (Example) 2005, June Date code 0.35 BAR63-02W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel ø330 mm = 10.000 Pieces/Reel Standard 4 Reel with 2 mm Pitch 2 0.2 1.45 2.5 8 0.2 ±0.05 Cathode marking 1 0.3 ±0.05 Cathode marking 0.4 0.9 Cathode marking 0.7 6 2007-04-19 BA595/BA885/BA895... Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code M onth 2 0 03 01 02 03 04 05 06 07 08 09 10 11 12 a b c d e f g h j k l n 2 0 04 p q r s t u v x y z 2 3 2005 A B C D E F G H J K L N 2006 P Q R S T U V X Y Z 4 5 2 0 07 a b c d e f g h j k l n 2008 p q r s t u v x y z 2 3 2009 A B C D E F G H J K L N 2010 P Q R S T U V X Y Z 4 5 2011 a b c d e f g h j k l n 2012 p q r s t u v x y z 2 3 2 0 13 A B C D E F G H J K L N 2014 P Q R S T U V X Y Z 4 5 1 ) New Marking Layout for SC75, implemented at October 2005. . 7 2007-04-19 Package SOD323 BA595/BA885/BA895... Package Outline 0.9 +0.2 -0.1 +0.2 1.25 -0.1 0 ±0.05 A 1.7 +0.2 -0.1 +0.05 0.3 -0.2 2 Cathode marking 1 0.3 +0.1 -0.05 0.25 M A 0.45 ±0.15 2.5 ±0.2 0.15 +0.1 -0.06 Foot Print 0.6 Marking Layout (Example) 0.8 1.7 0.8 BAR63-03W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 2 2.9 8 Cathode marking 0.65 1.35 1 8 2007-04-19 Package SOT23 BA595/BA885/BA895... Package Outline 0.15 MIN. 1 ±0.1 0.1 MAX. 1.3 ±0.1 2.9 ±0.1 3 B 2.4 ±0.15 10˚ MAX. 0.4 +0.1 -0.05 1) 1 2 10˚ MAX. C 0.95 1.9 0.08...0.1 A 5 0...8˚ 0.25 M B C 0.2 M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s Pin 1 0.9 1.3 2005, June Date code (YM) BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.9 2.13 2.65 0.2 8 Pin 1 3.15 1.15 9 2007-04-19 BA595/BA885/BA895... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 10 2007-04-19