BAS125

BAS125... Silicon Schottky Diodes • For low-loss, fast-recovery, meter protection, bias isolation and clamping application • Integrated diffused guard ring • Low forward voltage • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAS125-04W ! BAS125-05W ! BAS125-06W ! BAS125-07W " ! , , , , , , , ,     ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAS125-04W BAS125-05W BAS125-06W BAS125-07W Package SOT323 SOT323 SOT323 SOT343 Configuration series common cathode common anode parallel pair LS(nH) 1.4 1.4 1.4 1.6 Marking 14s 15s 16s 17s Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Diode reverse voltage Forward current Non-repetitive peak surge forward current Total power dissipation BAS125-04W, BAS125-06W, TS ≤ 84°C BAS125-05W, T S ≤ 76°C BAS125-07W, T S ≤ 96°C Junction temperature Storage temperature 1Pb-containing Symbol VR IF I FSM Ptot Value 25 100 500 Unit V mA mW 250 250 250 Tj T stg 150 -55 ... 150 °C package may be available upon special request 1 2007-04-19 BAS125... Thermal Resistance Parameter Junction - soldering point 1) BAS125-04W, BAS125-06W BAS125-05W BAS125-07W Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter DC Characteristics Reverse current VR = 20 V VR = 25 V Forward voltage IF = 1 mA IF = 10 mA IF = 35 mA Forward voltage matching2) IF = 10 mA ∆ VF VF 385 530 800 400 650 950 20 IR 100 150 mV nA Symbol min. Values typ. max. Unit Symbol RthJS ≤ 365 ≤ 295 ≤ 215 Value Unit K/W AC Characteristics Diode capacitance VR = 0 , f = 1 MHz Differential forward resistance I F = 5 mA, f = 10 kHz 1For 2∆V CT RF - 15 1.1 - pF Ω calculation of RthJA please refer to Application Note Thermal Resistance F is the difference between lowest and highest V F in a multiple diode component. 2 2007-04-19 BAS125... Diode capacitance CT = ƒ (VR) f = 1MHz BAS 125... EHD07117 Forward resistance rf = ƒ (I F) f = 10 kHz 1.0 CT pF 0.8 10 4 rf Ω 10 3 BAS 125... EHD07118 0.6 10 2 0.4 10 1 0.2 0.0 0 10 V VR 20 10 0 10 -2 10 -1 10 0 10 1 mA 10 2 ΙF Reverse current IR = ƒ(VR) TA = Parameter 10 1 BAS 125... EHD07116 Forward current IF = ƒ (VF) TA = Parameter 10 2 BAS 125... EHD07115 ΙR µA 10 0 TA = 125 C ΙF mA 10 1 TA = 85 C 10 -1 10 0 TA = -40C 25 C 85 C 150 C 10 -2 TA = 25 C 10 -1 10 -3 0 10 V VR 20 10 -2 0.0 0.5 V VF 1.0 3 2007-04-19 BAS125... Forward current IF = ƒ (T S) BAS125-04W, BAS125-06W Forward current IF = ƒ (T S) BAS125-05W 120 120 mA mA 80 80 IF 60 IF 60 40 40 20 20 0 0 90 105 120 °C 0 0 15 30 45 60 75 150 15 30 45 60 75 90 105 120 °C 150 TS TS Forward current IF = ƒ (T S) BAS125-07W 120 mA 80 IF 60 40 20 0 0 15 30 45 60 75 90 105 120 °C 150 TS 4 2007-04-19 BAS125... Permissible Puls Load RthJS = ƒ (tp) BAS125-04W, BAS125-06W 10 3 Permissible Pulse Load IFmax / I FDC = ƒ (t p) BAS125-04W, BAS125-06W 10 2 K/W I Fmax/IFDC - 10 2 10 1 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 RthJS 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 tp tp Permissible Puls Load RthJS = ƒ (tp) BAS125-05W 10 3 Permissible Pulse Load IFmax / I FDC = ƒ (t p) BAS125-05W 10 1 10 2 IFmax/IFDC RthJS - 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 -5 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 0 -6 10 10 -4 10 -3 10 -2 10 0 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp tp 5 2007-04-19 Package SOT323 BAS125... Package Outline 2 ±0.2 0.3 +0.1 -0.05 3 1.25 ±0.1 2.1 ±0.1 0.9 ±0.1 3x 0.1 M 0.1 MAX. 0.1 A 1 0.65 0.65 2 0.1 MIN. 0.15 +0.1 -0.05 0.2 M A Foot Print 0.6 0.8 0.65 0.65 Marking Layout (Example) Manufacturer 1.6 2005, June Date code (YM) Pin 1 BCR108W Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 Pin 1 2.15 2.3 8 1.1 6 2007-04-19 Package SOT343 BAS125... Package Outline 2 ±0.2 1.3 4 3 0.15 1 0.3 +0.1 -0.05 4x 0.1 M +0.1 0.6 -0.05 0.9 ±0.1 0.1 MAX. 0.1 A 1.25 ±0.1 2.1 ±0.1 2 0.1 MIN. 0.15 -0.05 0.2 M +0.1 A Foot Print 0.6 0.8 1.15 0.9 Marking Layout (Example) Manufacturer 1.6 2005, June Date code (YM) Pin 1 BGA420 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 Pin 1 2.15 2.3 8 1.1 7 2007-04-19 BAS125... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 8 2007-04-19