BAS3005A-02V

BAS3005A... Low VF Schottky Diode • Forward current: 0.5 A • Reverse voltage: 30 V • Very low forward voltage (typ. 0.45 V @ IF = 0.5 A) • For low loss, fast-recovery protecting and clamping applications • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAS3005A-02V  Type BAS3005A-02V* * Preliminary data Package SC79 Configuration single Marking 2 Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Diode reverse voltage2) Forward current 2) Symbol VR IF Value 30 500 500 3.5 5 150 -55 ... 125 -65 ... 150 °C Unit V mA mA A Average rectified forward current (50/60Hz, sinus) I FAV Repetitive peak forward current I FRM (tp ≤ 1 ms, D ≤ 0.25) Non-repetitive peak surge forward current (t ≤ 10 ms) Junction temperature Operating temperature range Storage temperature 1Pb-containing 2For I FSM Tj T op T stg package may be available upon special request TA > 25 °C the derating of VR and IF has to be considered. 1 2007-04-19 BAS3005A... Thermal Resistance Parameter Junction - soldering point 1) Symbol RthJS Value tbd Unit K/W Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values min. typ. max. DC Characteristics Reverse current2) IR VR = 5 V VR = 10 V VR = 30 V Forward voltage2) IF = 1 mA IF = 10 mA IF = 100 mA IF = 500 mA VF 200 260 340 450 260 310 390 500 15 30 300 Unit µA mV AC Characteristics Diode capacitance VR = 5 V, f = 1 MHz 1For CT - 10 15 pF calculation of RthJA please refer to Application Note Thermal Resistance test: tp = 300 µs; D = 0.01 2Pulsed 2 2007-04-19 BAS3005A... Diode capacitance CT = ƒ (VR) f = 1MHz Reverse current IR = ƒ (TA) VR = Parameter 10 -2 A pF 35 10 -3 25 CT 20 10 -4 15 IR 30 V 20 V 10 V 5V 10 10 -5 5 0 0 5 10 15 20 V 30 10 -6 0 25 50 75 100 °C 150 VR TA Reverse current IR = ƒ(VR) TA = Parameter 10 -2 A Forward Voltage VF = ƒ (TA) IF = Parameter 0.5 V 500 mA 10 -3 125 °C 0.4 0.35 VF IR 10 -4 85 °C 0.3 0.25 100 mA 10 -5 25 °C 10 mA 0.2 0.15 0.1 0.05 1 mA 10 -6 10 -7 0 5 10 15 20 V 30 0 -50 -25 0 25 50 75 100 °C 150 VR TA 3 2007-04-19 BAS3005A... Forward current IF = ƒ (VF) TA = Parameter 10 0 A 10 -1 10 -2 IF 10 -3 125 °C 85 °C 25 °C - 40 °C 10 -4 10 -5 10 -6 0 0.1 0.2 0.3 0.4 V 0.6 VF 4 2007-04-19 Package SC79 BAS3005A... Package Outline 0.2 0.8 ±0.1 10˚MAX. M A 0.13 -0.03 +0.05 2 1.6 ±0.1 0.55 ±0.04 Foot Print 1.35 0.35 Marking Layout (Example) 2005, June Date code 0.35 BAR63-02V Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel ø330 mm = 10.000 Pieces/Reel Standard 4 Reel with 2 mm Pitch 2 0.2 1.33 1.96 Cathode marking 0.4 0.93 8 0.2 ±0.05 0.66 Cathode marking 1 0.3 ±0.05 Cathode marking 10˚MAX. 1.2 ±0.1 A 5 2007-04-19 BAS3005A... Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code M onth 2 0 03 01 02 03 04 05 06 07 08 09 10 11 12 a b c d e f g h j k l n 2 0 04 p q r s t u v x y z 2 3 2005 A B C D E F G H J K L N 2006 P Q R S T U V X Y Z 4 5 2 0 07 a b c d e f g h j k l n 2008 p q r s t u v x y z 2 3 2009 A B C D E F G H J K L N 2010 P Q R S T U V X Y Z 4 5 2011 a b c d e f g h j k l n 2012 p q r s t u v x y z 2 3 2 0 13 A B C D E F G H J K L N 2014 P Q R S T U V X Y Z 4 5 1 ) New Marking Layout for SC75, implemented at October 2005. . 6 2007-04-19 BAS3005A... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 2007-04-19