BAT165_07

BAT165... Medium Power AF Schottky Diode • Forward current: 750 mA Reverse voltage: 40 V • For low-loss, fast-recovery, meter protection, bias isolation and clamping applications • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAT165  ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAT165 Parameter Diode reverse voltage2) Forward current 2) Package SOD323 Configuration single Symbol VR IF Value 40 750 500 2.5 600 150 -65 ... 150 Marking C/White Unit V mA mA A mW °C Maximum Ratings at TA = 25°C, unless otherwise specified Average rectified forward current (50/60Hz, sinus) I FAV Non-repetitive peak surge forward current I FSM (t ≤ 10ms) Total power dissipation TS ≤ 93°C Junction temperature Storage temperature Thermal Resistance Parameter Junction - soldering point 3) 1Pb-containing 2For 3For Ptot Tj T stg Symbol RthJS Value ≤ 95 Unit K/W package may be available upon special request TA > 25°C the derating of VR and IF has to be considered. Please refer to the atteched curves. calculation of RthJA please refer to Application Note Thermal Resistance 1 2007-04-19 BAT165... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values min. typ. max. DC Characteristics Reverse current1) IR VR = 30 V VR = 40 V VR = 40 V, TA = 65 °C Forward voltage IF = 10 mA IF = 100 mA IF = 250 mA IF = 750 mA VF 0.23 0.32 0.35 0.44 0.315 0.39 0.44 0.58 0.4 0.47 0.54 0.74 12 50 900 V Unit µA AC Characteristics Diode capacitance VR = 10 V, f = 1 MHz 1Pulsed CT - 8.4 12 pF test: tp = 300 µs; D = 0.01 2 2007-04-19 BAT165... Diode capacitance CT = ƒ (VR) f = 1MHz Reverse current IR = ƒ (TA) VR = Parameter 10 -2 A 40 pF 34 30 10 -3 CT IR 26 10 -4 22 10 -5 18 14 10 -6 40 V 30 V 20 V 10 V 5V 10 6 0 10 -7 20 2 4 6 8 10 12 V 15 40 60 80 100 °C 130 VR TA Reverse current IR = ƒ(VR) TA = Parameter 10 -2 A Forward current IF = ƒ (VF) TA = Parameter 10 0 A 10 -3 TA = 125°C 10 -1 10 -4 IR IF TA = 85°C 10 -2 10 -5 10 -3 10 -6 TA = 25°C TA= -40 °C = -20 =0 = 25 = 45 = 65 = 85 10 -7 10 -4 10 -8 0 5 10 15 20 25 30 V 40 10 -5 0 0.1 0.2 0.3 0.4 0.5 0.6 V 0.8 VR VF 3 2007-04-19 BAT165... Permissible Reverse voltage V R = ƒ (TA) tp = Parameter, Duty cycle < 0.01 Device mounted on PCB with Rth = 160 k/W 50 V DC 100ms 300µs mA Forward current IF = ƒ (T S) 1000 40 V Rmax 35 30 25 20 15 250 10 5 0 0 0 0 IF 500 120 °C 20 40 60 80 100 150 15 30 45 60 75 90 105 120 °C 150 TA TS Permissible Puls Load R thJS = ƒ (tp) Permissible Pulse Load IFmax / I FDC = ƒ (t p) 10 2 10 2 10 1 IFmax/IFDC - RthJS 10 0 D = 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -1 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 tp tp 4 2007-04-19 Package SOD323 BAT165... Package Outline 0.9 +0.2 -0.1 +0.2 1.25 -0.1 0 ±0.05 A 1.7 +0.2 -0.1 +0.05 0.3 -0.2 2 Cathode marking 1 0.3 +0.1 -0.05 0.25 M A 0.45 ±0.15 2.5 ±0.2 0.15 +0.1 -0.06 Foot Print 0.6 Marking Layout (Example) 0.8 1.7 0.8 BAR63-03W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 2 2.9 8 Cathode marking 0.65 1.35 1 5 2007-04-19 BAT165... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 6 2007-04-19