BAT240

BAT240... High Voltage Schottky Diode • Rectifier Schottky diode for telecommunication and industrial applications • High reverse voltage: 240 V • For power supply applications • For clamping and protection in high voltage applications • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAT240A ! , ,  ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAT240A Parameter Diode reverse voltage2) Forward current 2) Non-repetitive peak surge forward current (t ≤ 10ms) Total power dissipation TS ≤ 28°C Junction temperature Operating temperature range Storage temperature 1Pb-containing 2For Package SOT23 Configuration half bridge Symbol VR IF I FSM Ptot Tj T op T stg Value 240 400 1 400 150 -55 ... 125 -55 ... 150 Marking 4Ms Unit V mA A mW °C Maximum Ratings at TA = 25°C, unless otherwise specified package may be available upon special request TA > 25 °C the derating of VR and IF has to be considered. Please refer to the attached curves. 1 2007-10-04 BAT240... Thermal Resistance Parameter Junction - soldering point 1) Symbol RthJS Value ≤ 305 Unit K/W Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics 240 V Breakdown voltage V(BR) I(BR) = 500 µA Reverse current VR = 100 V VR = 200 V Forward voltage IF = 10 mA IF = 20 mA IF = 50 mA IF = 100 mA IF = 200 mA IF = 400 mA VF 0.25 0.29 0.35 0.325 0.37 0.47 0.58 0.72 0.9 0.36 0.41 0.52 IR 1 5 10 V µA AC Characteristics Diode capacitance VR = 10 V, f = 1 MHz VR = 5 V, f = 1 MHz 1For CT 11 15 15 20 pF calculation of RthJA please refer to Application Note Thermal Resistance 2 2007-10-04 BAT240... Diode capacitance CT = ƒ (VR) f = 1MHz 10 2 Reverse current IR = ƒ (TA) VR = Parameter 10 -2 A pF 10 -3 200 V 150 V 100 V 50 V CT IR 10 1 10 0 0 80 100 120 140 160 V 10 -4 10 -5 10 -6 20 40 60 200 10 -7 20 40 60 80 100 °C 130 VR TA Forward Voltage VF = ƒ (TA) IF = Parameter 0.55 V Forward current IF = ƒ (VF) TA = Parameter 10 -1 A 0.45 10 -2 VF 50mA 0.35 IF 0.4 0.3 20mA 10 -3 0.25 80°C 65°C 45°C 25°C -40°C 0.2 10mA 0.15 -50 -25 0 25 50 75 100 °C 150 10 -4 0 0.1 0.2 0.3 0.4 V 0.6 TA VF 3 2007-10-04 BAT240... Permissible Reverse voltage VR = ƒ (TA) tp = Parameter, Duty cycle < 0.01 Device mounted on PCB with Rth = 160 k/W 300 450 mA V DC 100ms 300µs Forward current IF = ƒ (T S) 350 V Rmax 200 300 IF 250 150 200 100 150 100 50 50 0 0 0 0 20 40 60 80 100 120 °C 150 15 30 45 60 75 90 105 120 °C 150 TA TS Permissible Puls Load R thJS = ƒ (tp) Permissible Pulse Load IFmax / I FDC = ƒ (t p) 10 3 K/W 10 3 - 10 2 IFmax/IFDC RthJS 10 2 10 1 10 0 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 10 -1 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp tp 4 2007-10-04 BAT240... Application example BAT240A Energy efficient bridge rectification for 110 V / 60 Hz power lines 3 3 D1 D2 D1 D2 DC output 2 AC input ~ ~ 1 2 1 + 5 2007-10-04 Package SOT23 BAT240... Package Outline 0.15 MIN. 1 ±0.1 0.1 MAX. 1.3 ±0.1 2.9 ±0.1 3 B 2.4 ±0.15 10˚ MAX. 0.4 +0.1 -0.05 1) 1 2 10˚ MAX. C 0.95 1.9 0.08...0.1 A 5 0...8˚ 0.25 M B C 0.2 M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s Pin 1 0.9 1.3 2005, June Date code (YM) BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.9 2.13 2.65 0.2 8 Pin 1 3.15 1.15 6 2007-10-04 BAT240... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 2007-10-04