BAT68-08S

BAT68... Silicon Schottky Diodes • For mixer applications in the VHF / UHF range • For high-speed switching applications • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAT68 ! BAT68-04 BAT68-04W ! BAT68-06 BAT68-06W ! BAT68-07W " ! BAT68-08S $ # " , , , , , , , , ,!      ! ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAT68 BAT68-04 BAT68-04W BAT68-06 BAT68-06W BAT68-07W BAT68-08S 1Pb-containing Package SOT23 SOT23 SOT323 SOT23 SOT323 SOT343 SOT363 Configuration single series series common anode common anode parallel pair parallel triple LS(nH) 1.8 1.8 1.4 1.8 1.4 1.6 1.4 Marking 83s 84s 84s 86s 86s 87s 83s package may be available upon special request 1 2007-04-19 BAT68... Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Diode reverse voltage Forward current Total power dissipation BAT68, TS ≤ 77°C BAT68-04, BAT68-06, TS ≤ 61°C BAT68-04W/-06W/-08S, TS ≤ 92°C BAT68-07W, TS ≤ 89°C Junction temperature Storage temperature Thermal Resistance Parameter Junction - soldering point 1) BAT68 BAT68-04, BAT68-06 BAT68-04W-BAT68-06W, BAT68-08S BAT68-07W Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter DC Characteristics Breakdown voltage I(BR) = 10 µA Reverse current VR = 1 V VR = 1 V, TA = 60 °C Forward voltage IF = 1 mA IF = 10 mA 1For Symbol VR IF Ptot Value 8 130 150 150 150 150 150 -55 ... 150 Unit V mA mW Tj Tstg °C Symbol RthJS Value ≤ 490 ≤ 590 ≤ 390 ≤ 410 Unit K/W Symbol min. V(BR) IR VF 340 8 Values typ. max. - Unit V µA 318 390 0.1 1.2 mV 340 500 calculation of RthJA please refer to Application Note Thermal Resistance 2 2007-04-19 BAT68... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter AC Characteristics Diode capacitance VR = 0 , f = 1 MHz Differential forward resistance I F = 5 mA, f = 10 kHz RF 10 Ω CT 1 pF Symbol min. Values typ. max. Unit 3 2007-04-19 BAT68... Diode capacitance CT = ƒ (VR) f = 1MHz BAT 68... EHD07103 Differential forward resistance rf = ƒ (IF) f = 10kHz CT 1.0 pF 10 3 rf Ω BAT 68... EHD07104 10 2 0.5 10 1 0 0 1 2 3 V VR 4 10 0 10 -1 10 0 10 1 mA 10 2 ΙF Reverse current IR = ƒ(VR) TA = Parameter BAT 68... EHD07102 Forward current IF = ƒ (VF) TA = Parameter 10 2 mA BAT 68... EHD07101 ΙR 10 2 µA 10 1 ΙF TA = 150 C 10 1 TA = -40 25 85 150 C C C C 10 0 85 C 10 0 10 -1 10 -2 25 C 10 -1 10 -3 0 1 2 3 V VR 4 10 -2 0.0 0.1 0.2 0.3 0.4 0.5 V 0.6 VF 4 2007-04-19 BAT68... Forward current IF = ƒ (T S) BAT68 Forward current IF = ƒ (T S) BAT68-04, BAT68-06 140 mA 140 mA 100 100 IF 80 IF 80 60 60 40 40 20 20 0 0 90 105 120 °C 0 0 15 30 45 60 75 150 15 30 45 60 75 90 105 120 °C 150 TS TS Forward current IF = ƒ (T S) BAT68-04W, BAT68-06W, BAT68-08S Forward current IF = ƒ (T S) BAT68-07W 140 mA 140 mA 100 100 IF 80 IF 80 60 60 40 40 20 20 0 0 90 105 120 °C 0 0 15 30 45 60 75 150 15 30 45 60 75 90 105 120 °C 150 TS TS 5 2007-04-19 BAT68... Permissible Puls Load RthJS = ƒ (tp) BAT68-04W, BAT68-06W 10 3 Permissible Pulse Load IFmax / I FDC = ƒ (t p) BAT68-04W, BAT68-06W 10 1 K/W RthJs 10 2 IF max/IFDC - 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 -6 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 0 -7 10 10 -5 10 -4 10 -3 10 -2 s 10 0 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 tp tp Permissible Puls Load RthJS = ƒ (tp) BAT68-07W 10 3 Permissible Pulse Load IFmax / I FDC = ƒ (t p) BAT68-07W 10 2 K/W IFmax/IFDC - 10 2 10 1 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 RthJS 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 tp tp 6 2007-04-19 BAT68... Rectifier voltage Vout = ƒ (V in) f = 900MHz RL = Parameter in kΩ 10 4 mV Testcircuit D.U.T V R IN 50 Ω 10 3 I C 1nF L R L V0 VO 10 2 10 1 10 0 10 -1 1000 500 200 100 50 20 10 -2 0 10 10 1 10 2 mV 10 3 VI 7 2007-04-19 Package SOT23 BAT68... Package Outline 0.15 MIN. 1 ±0.1 0.1 MAX. 1.3 ±0.1 2.9 ±0.1 3 B 2.4 ±0.15 10˚ MAX. 0.4 +0.1 -0.05 1) 1 2 10˚ MAX. C 0.95 1.9 0.08...0.1 A 5 0...8˚ 0.25 M B C 0.2 M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s Pin 1 0.9 1.3 2005, June Date code (YM) BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.9 2.13 2.65 0.2 8 Pin 1 3.15 1.15 8 2007-04-19 Package SOT323 BAT68... Package Outline 2 ±0.2 0.3 +0.1 -0.05 3 1.25 ±0.1 2.1 ±0.1 0.9 ±0.1 3x 0.1 M 0.1 MAX. 0.1 A 1 0.65 0.65 2 0.1 MIN. 0.15 +0.1 -0.05 0.2 M A Foot Print 0.6 0.8 0.65 0.65 Marking Layout (Example) Manufacturer 1.6 2005, June Date code (YM) Pin 1 BCR108W Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 Pin 1 2.15 2.3 8 1.1 9 2007-04-19 Package SOT343 BAT68... Package Outline 2 ±0.2 1.3 4 3 0.15 1 0.3 +0.1 -0.05 4x 0.1 M +0.1 0.6 -0.05 0.9 ±0.1 0.1 MAX. 0.1 A 1.25 ±0.1 2.1 ±0.1 2 0.1 MIN. 0.15 -0.05 0.2 M +0.1 A Foot Print 0.6 0.8 1.15 0.9 Marking Layout (Example) Manufacturer 1.6 2005, June Date code (YM) Pin 1 BGA420 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 Pin 1 2.15 2.3 8 1.1 10 2007-04-19 Package SOT363 BAT68... Package Outline 2 ±0.2 0.2 -0.05 +0.1 0.9 ±0.1 6x 0.1 4 1.25 ±0.1 2.1 ±0.1 M 0.1 MAX. 0.1 A 6 5 Pin 1 marking 1 2 3 0.1 MIN. 0.65 0.65 0.2 M 0.15 +0.1 -0.05 A Foot Print 0.3 0.9 0.7 0.65 0.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. 1.6 Manufacturer 2005, June Date code (Year/Month) Pin 1 marking Laser marking BCR108S Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel For symmetric types no defined Pin 1 orientation in reel. 4 0.2 2.3 8 Pin 1 marking 2.15 1.1 11 2007-04-19 BAT68... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 12 2007-04-19