BB833

BB833... Silicon Tuning Diodes • Extended frequency range up to 2.5 GHz; spezial design for use in TV-sat tuners • High capacitance ratio • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BB833  Type BB833 Package SOD323 Configuration single LS(nH) 1.8 Marking white X Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Diode reverse voltage Peak reverse voltageR ≥ 5kΩ Forward current Operating temperature range Storage temperature 1Pb-containing Symbol VR VRM IF Top Tstg Value 30 35 20 -55 ... 150 -55 ... 150 Unit V mA °C package may be available upon special request 1 2007-04-20 BB833... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter DC Characteristics Reverse current VR = 30 V VR = 30 V, TA = 85 °C AC Characteristics Diode capacitance VR = 1 V, f = 1 MHz VR = 28 V, f = 1 MHz CT Symbol min. IR - Values typ. 20 500 max. Unit nA pF 8.5 0.6 9.3 0.75 12.4 1.8 10 0.9 3 % Ω Capacitance ratio VR = 1 V, VR = 28 V, f = 1 MHz CT1 /CT28 11 - Capacitance matching1) VR = 1 V, VR = 28 V, f = 1 MHz ∆CT/CT rS Series resistance VR = 1 V, f = 470 MHz 1For details please refer to Application Note 047. 2 2007-04-20 BB833... Diode capacitance CT = ƒ (VR) f = 1MHz BB 833 EHD07121 Temperature coefficient of the diode capacitance TCc = ƒ (VR) 10 -3 12 CT pF 10 1/°C TCc 10 -4 10 -5 -1 10 8 6 4 2 0 10 0 10 1 V VR 10 2 10 0 10 1 V 10 2 VR 3 2007-04-20 Package SOD323 BB833... Package Outline 0.9 +0.2 -0.1 +0.2 1.25 -0.1 0 ±0.05 A 1.7 +0.2 -0.1 +0.05 0.3 -0.2 2 Cathode marking 1 0.3 +0.1 -0.05 0.25 M A 0.45 ±0.15 2.5 ±0.2 0.15 +0.1 -0.06 Foot Print 0.6 Marking Layout (Example) 0.8 1.7 0.8 BAR63-03W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 2 2.9 8 Cathode marking 0.65 1.35 1 4 2007-04-20 BB833... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 5 2007-04-20