BCR10PN_07

BCR10PN NPN/PNP Silicon Digital Transistor Array • Switching circuit, inverter, interface circuit, driver circuit • Two (galvanic) internal isolated NPN/PNP Transistors in one package • Built in bias resistor NPN and PNP (R1=10 kΩ, R2 =10 kΩ) • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 TR1 R2 1 E1 2 B1 3 C2 EHA07176 4 5 6 1 2 3 C1 6 B2 5 E2 4 R2 R1 R1 TR2 Tape loading orientation Top View 654 W1s 123 Direction of Unreeling Position in tape: pin 1 opposite of feed hole side EHA07193 Marking on SOT-363 package (for example W1s) corresponds to pin 1 of device Type BCR10PN Marking W1s Pin Configuration Package 1=E1 2=B1 3=C2 4=E2 5=B2 6=C1 SOT363 Maximum Ratings for NPN and PNP Types Parameter Collector-emitter voltage Collector-base voltage Input forward voltage Input reverse voltage DC collector current Total power dissipation, TS = 115 °C Junction temperature Storage temperature Thermal Resistance Junction - soldering point 2) RthJS ≤ 140 Symbol VCEO VCBO Vi(fwd) Vi(rev) IC Ptot Tj Tstg Value 50 50 40 10 100 250 150 -65 ... 150 Unit V mA mW °C K/W 1Pb-containing package may be available upon special request 2For calculation of R please refer to Application Note Thermal Resistance thJA 1 2007-07-24 BCR10PN Electrical Characteristics at TA=25°C, unless otherwise specified Parameter DC Characteristics for NPN and PNP Types Collector-emitter breakdown voltage IC = 100 µA, IB = 0 Collector-base breakdown voltage IC = 10 µA, IE = 0 Collector cutoff current VCB = 40 V, IE = 0 Emitter cutoff current VEB = 10 V, IC = 0 DC current gain 1) IC = 5 mA, VCE = 5 V Collector-emitter saturation voltage1) IC = 10 mA, IB = 0.5 mA Input off voltage IC = 100 µA, V CE = 5 V Input on Voltage IC = 2 mA, VCE = 0.3 V Input resistor Resistor ratio R1 R1/R2 7 0.9 10 1 13 1.1 kΩ Vi(on) 1 2.5 Vi(off) 0.8 1.5 VCEsat 0.3 V hFE 30 IEBO 0.75 mA ICBO 100 nA V(BR)CBO 50 V(BR)CEO 50 V Symbol min. Values typ. max. Unit AC Characteristics for NPN and PNP Types Transition frequency IC = 10 mA, VCE = 5 V, f = 100 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz Ccb 3 pF fT 130 MHz 1) Pulse test: t < 300µs; D < 2% 2 2007-07-24 BCR10PN NPN Type DC Current Gain hFE = f (I C) VCE = 5V (common emitter configuration) 10 3 Collector-Emitter Saturation Voltage VCEsat = f (IC), hFE = 20 0.5 VCEsat -40 °C -25 °C 25 °C 85 °C 125 °C V 0.4 0.35 0.3 0.25 0.2 hFE 10 2 10 1 0.15 0.1 0.05 10 0 -4 10 -3 -2 -40 °C -25 °C 25 °C 85 °C 125 °C 10 10 A 10 -1 0 -3 10 10 -2 A 10 -1 IC IC Input on Voltage Vi(on) = f (IC ) VCE = 0.3V (common emitter configuration) 10 2 Input off voltage Vi(off) = f (IC ) VCE = 5V (common emitter configuration) 10 1 V V -40 °C -25 °C 25 °C 85 °C 125 °C -40 °C -25 °C 25 °C 85 °C 125 °C Vi(off) 10 0 -3 -2 -1 Vi(on) 10 1 10 0 10 -1 -5 10 10 -4 10 10 A 10 10 -1 10 -5 10 -4 10 -3 10 -2 A 10 -1 IC IC 3 2007-07-24 BCR10PN PNP Type DC Current Gain hFE = f (I C) VCE = 5V (common emitter configuration) 10 3 Collector-Emitter Saturation Voltage VCEsat = f (IC), hFE = 20 1 VCEsat -40 °C -25 °C 25 °C 85 °C 125 °C V 0.8 0.7 0.6 0.5 0.4 hFE 10 2 -40 °C -25 °C 25 °C 85 °C 125 °C 10 1 0.3 0.2 0.1 10 0 -4 10 -3 -2 10 10 A 10 -1 0 -3 10 10 -2 A 10 -1 IC IC Input on Voltage Vi(on) = f (IC ) VCE = 0.3V (common emitter configuration) 10 2 Input off voltage Vi(off) = f (IC) VCE = 5V (common emitter configuration) 10 1 V V Vi(off) Vi(on) 10 1 -40 °C -25 °C 25 °C 85 °C 125 °C -40 °C -25 °C 25 °C 85 °C 125 °C 10 0 10 0 10 -1 -5 10 10 -4 10 -3 10 -2 A 10 -1 10 -1 10 -5 10 -4 10 -3 10 -2 A 10 -1 IC IC 4 2007-07-24 BCR10PN Total power dissipation Ptot = f (TS) 300 mW 250 225 Ptot 200 175 150 125 100 75 50 25 0 0 15 30 45 60 75 90 105 120 °C 150 TS Permissible Pulse Load RthJS = f (tp) Permissible Pulse Load Ptotmax / PtotDC = f (t p) 10 3 K/W 10 3 10 2 Ptotmax / PtotDC - 10 2 10 1 10 0 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 RthJS 10 1 10 -1 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp tp 5 2007-07-24 Package SOT363 BCR10PN Package Outline 2 ±0.2 0.2 -0.05 +0.1 0.9 ±0.1 6x 0.1 4 1.25 ±0.1 2.1 ±0.1 M 0.1 MAX. 0.1 A 6 5 Pin 1 marking 1 2 3 0.1 MIN. 0.65 0.65 0.2 M 0.15 +0.1 -0.05 A Foot Print 0.3 0.9 0.7 0.65 0.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. 1.6 Manufacturer 2005, June Date code (Year/Month) Pin 1 marking Laser marking BCR108S Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel For symmetric types no defined Pin 1 orientation in reel. 4 0.2 2.3 8 Pin 1 marking 2.15 1.1 6 2007-07-24 BCR10PN Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 2007-07-24