BCR189_07

BCR189... PNP Silicon Digital Transistor • Switching circuit, inverter, interface circuit, driver circuit • Built in bias resistor (R1 = 22 kΩ) • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BCR189F C 3 R1 1 B 2 E EHA07180 Type BCR189F Marking W2s 1=B Pin Configuration 2=E 3=C - Package TSFP-3 Maximum Ratings Parameter Collector-emitter voltage Collector-base voltage Input forward voltage Input reverse voltage Collector current Total power dissipation BCR189F, TS ≤ 128°C Junction temperature Storage temperature Thermal Resistance Parameter Junction - soldering point 2), BCR189F 1Pb-containing 2For Symbol VCEO VCBO Vi(fwd) Vi(rev) IC Ptot Tj Tstg Symbol RthJS Value 50 50 60 5 100 250 150 -65 ... 150 Value ≤ 90 Unit V mA mW °C Unit K/W package may be available upon special request calculation of RthJA please refer to Application Note Thermal Resistance 1 2007-08-03 BCR189... Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Values Unit Parameter min. typ. max. DC Characteristics Collector-emitter breakdown voltage V(BR)CEO 50 V IC = 100 µA, IB = 0 Collector-base breakdown voltage IC = 10 µA, IE = 0 Collector-base cutoff current VCB = 40 V, IE = 0 Emitter-base cutoff current VEB = 5 V, IC = 0 DC current gain1) IC = 5 mA, VCE = 5 V Collector-emitter saturation voltage1) IC = 10 mA, IB = 0.5 mA Input off voltage IC = 100 µA, VCE = 5 V Input on voltage IC = 2 mA, VCE = 0.3 V Input resistor R1 15 22 29 kΩ Vi(on) 0.5 1.1 Vi(off) 0.4 0.8 VCEsat 0.3 V h FE 120 630 I EBO I CBO 100 nA V(BR)CBO 50 - AC Characteristics Transition frequency IC = 10 mA, VCE = 5 V, f = 100 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz 1Pulse fT Ccb - 200 3 - MHz pF test: t < 300µs; D < 2% 2 2007-08-03 BCR189... DC current gain hFE = ƒ(IC) VCE = 5 V (common emitter configuration) 10 3 Collector-emitter saturation voltage VCEsat = ƒ(IC), IC/IB = 20 1 V 0.8 V CEsat h FE 10 2 0.7 0.6 0.5 0.4 0.3 0.2 0.1 -40 °C -25 °C 25 °C 85 °C 125 °C 10 1 -40 °C -25 °C 25 °C 85 °C 125 °C 10 0 -4 10 10 -3 10 -2 A 10 -1 0 -3 10 10 -2 A 10 -1 IC IC Input on Voltage Vi(on) = ƒ(IC ) VCE = 0.3V (common emitter configuration) 10 2 Input off voltage V i(off) = ƒ(IC) VCE = 5V (common emitter configuration) 10 2 V V -40 °C -25 °C 25 °C 85 °C 125 °C 10 0 Vi(off) Vi(on) 10 1 10 1 -40 °C -25 °C 25 °C 85 °C 125 °C 10 0 10 -1 -5 10 10 -4 10 -3 10 -2 A 10 -1 10 -1 -5 10 10 -4 10 -3 10 -2 A 10 -1 IC IC 3 2007-08-03 BCR189... Total power dissipation Ptot = ƒ(TS) BCR189F 300 mW 250 225 P tot 200 175 150 125 100 75 50 25 0 0 15 30 45 60 75 90 105 120 °C 150 TS Permissible Puls Load RthJS = ƒ (tp) BCR189F 10 2 Permissible Pulse Load Ptotmax/P totDC = ƒ(tp) BCR189F 10 3 10 1 10 0 D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 Ptotmax /PtotDC K/W RthJS 10 2 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 -1 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp tp 4 2007-08-03 Package TSFP-3 BCR189... Package Outline 1.2 ±0.05 10˚ MAX. 0.8 ±0.05 0.2 ±0.05 1.2 ±0.05 0.2 ±0.05 0.4 0.45 3 0.55 ±0.04 1 2 0.2 ±0.05 0.4 ±0.05 0.4 ±0.05 0.15 ±0.05 Foot Print 0.4 0.4 Marking Layout (Example) Manufacturer 1.05 Pin 1 BCR847BF Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.3 1.2 1.5 8 0.2 Pin 1 1.35 0.7 5 2007-08-03 BCR189... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 6 2007-08-03