BCV62

BCV62 PNP Silicon Double Transistor 3 To be used as a current mirror Good thermal coupling and VBE matching High current gain Low collector-emitter saturation voltage C1 (2) C2 (1) 1For calculation of R thJA please refer to Application Note Thermal Resistance 1




4 2 1 VPS05178 Tr.1 Tr.2 E1 (3) E2 (4) EHA00013 Type BCV62A BCV62B BCV62C Maximum Ratings Parameter Marking 3Js 3Ks 3Ls 1 = C2 1 = C2 1 = C2 Pin Configuration 2 = C1 2 = C1 2 = C1 3 = E1 3 = E1 3 = E1 4 = E2 4 = E2 4 = E2 Package SOT143 SOT143 SOT143 Symbol VCEO VCBO VEBS IC ICM IBM Ptot Tj Tstg Value 30 30 6 100 200 200 300 150 -65 ... 150 Unit V Collector-emitter voltage (transistor T1) Collector-base voltage (open emitter) (transistor T1) Emitter-base voltage DC collector current Peak collector current Base peak current (transistor T1) Total power dissipation, TS = 99 °C Junction temperature Storage temperature Thermal Resistance mA mW °C Junction - soldering point1) RthJS 170 K/W Jul-11-2001 BCV62 Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values min. DC Characteristics of T1 Collector-emitter breakdown voltage IC = 10 mA, IB = 0 Collector-base breakdown voltage IC = 10 µA, IB = 0 Emitter-base breakdown voltage IE = 10 µA, IC = 0 Collector cutoff current VCB = 30 V, IE = 0 Collector cutoff current VCB = 30 V, IE = 0 , TA = 150 °C DC current gain 1) IC = 0.1 mA, VCE = 5 V DC current gain 1) IC = 2 mA, VCE = 5 V BCV62A BCV62B BCV62C Collector-emitter saturation voltage1) IC = 10 mA, IB = 0.5 mA IC = 100 mA, IB = 5 mA Base-emitter saturation voltage 1) IC = 10 mA, IB = 0.5 mA IC = 100 mA, IB = 5 mA Base-emitter voltage 1) IC = 2 mA, VCE = 5 V IC = 10 mA, VCE = 5 V VBE(ON) 600 650 750 820 VBEsat 700 850 VCEsat 75 250 300 650 hFE 125 220 420 180 290 520 220 475 800 hFE 100 ICBO 5 ICBO 15 V(BR)EBO 6 V(BR)CBO 30 V(BR)CEO 30 typ. max. Unit V nA µA - mV 1) Pulse test: t ≤ 300µs, D = 2% 2 Jul-11-2001 BCV62 Electrical Characteristics at TA = 25°C, unless otherwise specified. Parameter DC Characteristics Base-emitter forward voltage IE = 10 µA IE = 250 mA Matching of transistor T1 and transistor T2 at IE2 = 0.5mA and VCE1 = 5V TA = 25 °C TA = 150 °C Thermal coupling of transistor T1 and transistor T2 1) T1: VCE = 5V Maximum current of thermal stability of IC1 AC characteristics of transistor T1 Transition frequency IC = 10 mA, VCE = 5 V, f = 100 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz Emitter-base capacitance VEB = 0.5 V, f = 1 MHz Noise figure IC = 200 µA, VCE = 5 V, RS = 2 k , Short-circuit input impedance IC = 1 mA, VCE = 10 V, f = 1 kHz Open-circuit reverse voltage transf.ratio IC = 1 mA, VCE = 10 V, f = 1 kHz Short-circuit forward current transf.ratio IC = 1 mA, VCE = 10 V, f = 1 kHz IC = 1 mA, VCE = 10 V, f = 1 kHz Open-circuit output admittance h21e h22e 100 30 900 S h12e 2 F f = 200 Hz 2 dB Ceb 8 Ccb 3 pF fT 250 MHz Symbol min. VBES 0.4 IC1 / IC2 0.7 0.7 IE2 - Values typ. max. Unit V 5 1.8 1.3 1.3 mA 10-4 1) Witout emitter resistor. Device mounted on alumina 15mm x 16.5mm x 0.7mm 3 Jul-11-2001
  f = 1 kHz,
h11e - 4.5 - k BCV62 Test circuit for current matching A Ι C1 2 1 VCE1 ... T1 T2 Ι E2 = constant 3 VCO 4 VCO EHN00003 Note: Voltage drop at contacts: VCO < 2/3 VT = 16mV Characteristic for determination of VCE1 at specified RE range with IE2 as parameter under condition of IC1/IE2 = 1.3 A Ι C1 2 1 VCE1 ... T1 T2 Ι E2 = constant 3 RE 4 RE EHN00004 Note: BCV62 with emitter resistors 4 Jul-11-2001 BCV62 Total power dissipation Ptot = f(TS) Permissible pulse load Ptotmax / PtotDC = f (tp) 10 3 Ptot max 5 Ptot DC BCV 62 EHP00941 350 mW D= tp T tp T 250 P tot 10 2 5 200 150 10 1 100 D= 0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 5 50 0 0 15 30 45 60 75 90 105 120 °C 150 TS 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s tp 10 0 5 Jul-11-2001