BCX41_07

BCX41 NPN Silicon AF and Switching Transistor • For general AF applications • High breakdown voltage • Low collector-emitter saturation voltage • Complementary type: BCX42 (PNP) • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 3 1 2 Type BCX41 Maximum Ratings Parameter Collector-emitter voltage Collector-base voltage Emitter-base voltage Collector current Peak collector current Base current Peak base current Total power dissipation TS ≤ 79 °C Junction temperature Storage temperature Thermal Resistance Parameter Junction - soldering point2) 1Pb-containing 2For Marking EKs Pin Configuration 1=B 2=E 3=C Package SOT23 Symbol VCEO VCBO VEBO IC ICM IB IBM Ptot Tj Tstg Symbol RthJS Value 125 125 5 800 1 100 200 330 150 -65 ... 150 Value ≤ 215 Unit V mA A mA mW °C Unit K/W package may be available upon special request calculation of RthJA please refer to Application Note Thermal Resistance 1 2007-04-20 BCX41 Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Values Unit Parameter min. typ. max. DC Characteristics Collector-emitter breakdown voltage V(BR)CEO 125 V IC = 10 mA, IB = 0 Collector-base breakdown voltage IC = 100 µA, IE = 0 V(BR)CBO V(BR)EBO I CBO 125 5 - µA Emitter-base breakdown voltage IE = 10 µA, IC = 0 Collector-base cutoff current VCB = 100 V, IE = 0 VCB = 100 V, IE = 0 , T A = 150 °C I CEO - 0.1 20 10 75 100 nA - Collector-emitter cutoff current VCE = 100 V, TA = 85 °C VCE = 100 V, TA = 125 °C I EBO h FE Emitter-base cutoff current VEB = 4 V, IC = 0 - DC current gain1) IC = 100 µA, VCE = 1 V IC = 100 mA, V CE = 1 V IC = 200 mA, V CE = 1 V 25 63 40 VCEsat VBEsat - 0.9 1.4 V Collector-emitter saturation voltage1) IC = 300 mA, IB = 30 mA - Base emitter saturation voltage1) IC = 300 mA, IB = 30 mA AC Characteristics Transition frequency IC = 20 mA, VCE = 5 V, f = 20 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz 1Pulse fT Ccb - 100 12 - MHz pF test: t < 300µs; D < 2% 2 2007-04-20 BCX41 DC current gain hFE = ƒ(IC) VCE = 1 V 10 3 BCX 41/BSS 64 EHP00427 Collector-emitter saturation voltage IC = ƒ(VCEsat), hFE = 10 10 mA 3 BCX 41/BSS 64 EHP00425 h FE 5 ΙC 10 150 ˚C 25 ˚C -50 ˚C 5 2 150 ˚C 25 ˚C -50 ˚C 10 2 10 5 1 5 10 5 0 10 1 10 -1 5 10 0 5 10 1 5 10 2 mA 10 3 10 -1 0 200 400 600 mV 800 VCE sat ΙC Base-emitter saturation voltage IC = ƒ(V BEsat), hFE = 10 10 3 mA BCX 41/BSS 64 EHP00424 Collector current I C = ƒ(V BE) VCE = 1V 10 3 mA BCX 41/BSS 64 EHP00421 ΙC 10 2 5 150 ˚C 25 ˚C -50 ˚C ΙC 10 2 5 TA = 150 ˚C 25 ˚C -50 ˚C 10 1 5 10 1 5 10 5 0 10 5 0 10 -1 0 1 2 V VBE sat 3 10 -1 0 1 2 V VBE 3 3 2007-04-20 BCX41 Collector cutoff current ICBO = ƒ(TA) VCBO = 80 V 10 4 nA BCX 41/BSS 64 EHP00426 Transition frequency fT = ƒ(IC) VCE = 5 V 10 3 MHz BCX 41/BSS 64 EHP00423 Ι CB0 10 3 5 10 2 5 10 1 5 10 0 max fT 5 10 2 typ 5 5 10 -1 10 1 10 0 0 50 100 ˚C TA 150 5 10 1 5 10 2 mA 10 3 ΙC Collector-base capacitance Ccb = ƒ(VCB) Emitter-base capacitance Ceb = ƒ(VEB) 100 pF Total power dissipation Ptot = ƒ(TS) 550 mW 450 400 CCB(CEB ) 80 70 BCW66K BCW66 Ptot CEB CCB 350 300 60 50 250 40 30 20 10 0 0 200 150 100 50 10 V 5 20 0 0 15 30 45 60 75 90 105 120 VCB(VEB) °C 150 TS 4 2007-04-20 BCX41 Permissible Pulse Load Ptotmax/P totDC = ƒ(tp) 10 3 Ptot max 5 Ptot DC BCX 41/BSS 64 EHP00422 D= tp T tp T 10 2 5 10 1 5 D= 0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 0 10 -6 10 -5 10 -4 10 -3 10 -2 s tp 10 0 5 2007-04-20 Package SOT23 BCX41 Package Outline 0.15 MIN. 1 ±0.1 0.1 MAX. 1.3 ±0.1 2.9 ±0.1 3 B 2.4 ±0.15 10˚ MAX. 0.4 +0.1 -0.05 1) 1 2 10˚ MAX. C 0.95 1.9 0.08...0.1 A 5 0...8˚ 0.25 M B C 0.2 M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s Pin 1 0.9 1.3 2005, June Date code (YM) BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.9 2.13 2.65 0.2 8 Pin 1 3.15 1.15 6 2007-04-20 BCX41 Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 2007-04-20