BFP181_07

BFP181 NPN Silicon RF Transistor* • For low noise, high-gain broadband amplifiers at collector currents from 0.5 mA to 12 mA • fT = 8 GHz, F = 0.9 dB at 900 MHz • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 * Short term description 4 1 3 2 ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BFP181 Maximum Ratings Parameter Marking Pin Configuration RFs 1=C 2=E 3=B 4=E Symbol VCEO VCES VCBO VEBO IC IB Ptot Tj TA T stg Symbol RthJS Package SOT143 Value 12 20 20 2 20 2 175 150 -65 ... 150 -65 ... 150 Value ≤ 430 Unit K/W mW °C mA Unit V Collector-emitter voltage Collector-emitter voltage Collector-base voltage Emitter-base voltage Collector current Base current Total power dissipation2) TS ≤ 75 °C Junction temperature Ambient temperature Storage temperature Thermal Resistance Parameter Junction - soldering point 3) 1Pb-containing 2T 3For package may be available upon special request is measured on the collector lead at the soldering point to the pcb S calculation of RthJA please refer to Application Note Thermal Resistance 2007-03-29 1 BFP181 Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter DC Characteristics Collector-emitter breakdown voltage IC = 1 mA, I B = 0 Collector-emitter cutoff current VCE = 20 V, VBE = 0 Collector-base cutoff current VCB = 10 V, I E = 0 Emitter-base cutoff current VEB = 1 V, IC = 0 DC current gainIC = 5 mA, VCE = 8 V, pulse measured hFE 70 100 140 IEBO 1 µA ICBO 100 nA ICES 100 µA V(BR)CEO 12 V Symbol min. Values typ. max. Unit 2007-03-29 2 BFP181 Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Values Unit Parameter min. typ. max. AC Characteristics (verified by random sampling) Transition frequency fT IC = 10 mA, VCE = 8 V, f = 500 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz, VBE = 0 , emitter grounded Collector emitter capacitance VCE = 10 V, f = 1 MHz, VBE = 0 , base grounded Emitter-base capacitance VEB = 0.5 V, f = 1 MHz, VCB = 0 , collector grounded Noise figure IC = 2 mA, VCE = 8 V, ZS = ZSopt, f = 900 MHz IC = 2 mA, VCE = 8 V, ZS = ZSopt, f = 1.8 GHz Power gain, maximum stable1) IC = 5 mA, VCE = 8 V, ZS = ZSopt, ZL = ZLopt , f = 900 MHz IC = 5 mA, VCE = 8 V, ZS = ZSopt, ZL = ZLopt , f = 1.8 GHz Transducer gain IC = 5 mA, VCE = 8 V, ZS = ZL = 50 Ω, f = 900 MHz IC = 5 mA, VCE = 8 V, ZS = ZL = 50 Ω, f = 1.8 GHz 1G 6 - 8 0.19 0.4 GHz pF Ccb Cce - 0.3 - Ceb - 0.4 - F G ms |S21e|2 17.5 12.5 21 17.5 0.9 1.2 - dB dB ms = |S 21 / S 12| 2007-03-29 3 BFP181 SPICE Parameter (Gummel-Poon Model, Berkley-SPICE 2G.6 Syntax): Transistor Chip Data: IS = VAF = NE = VAR = NC = RBM = CJE = TF = ITF = VJC = TR = MJS = XTI = 0.0010519 22.403 1.7631 5.1127 1.6528 6.6315 1.8168 17.028 1.0549 1.1633 2.7449 0 3 fA V V Ω fF ps mA V ns BF = IKF = BR = IKR = RB = RE = VJE = XTF = PTF = MJC = CJS = XTB = FC = 96.461 0.12146 16.504 0.24951 9.9037 2.1372 0.73155 0.33814 0 0.30013 0 0 0.99768 A A Ω V deg fF NF = ISE = NR = ISC = IRB = RC = MJE = VTF = CJC = XCJC = VJS = EG = TNOM 0.90617 12.603 0.87757 0.01195 0.69278 2.2171 0.43619 0.12571 319.69 0.082903 0.75 1.11 300 fA fA mA Ω V fF V eV K All parameters are ready to use, no scalling is necessary. Extracted on behalf of Infineon Technologies AG by: Institut für Mobil- und Satellitentechnik (IMST) Package Equivalent Circuit: LBI = LBO = LEI = LEO = LCI = LCO = CBE = CCB = CCE = 0.89 0.73 0.4 0.15 0 0.42 189 15 187 nH nH nH nH nH nH fF fF fF Valid up to 6GHz For examples and ready to use parameters please contact your local Infineon Technologies distributor or sales office to obtain a Infineon Technologies CD-ROM or see Internet: http://www.infineon.com 2007-03-29 4 BFP181 Total power dissipation Ptot = ƒ(TS) Permissible Pulse Load RthJS = ƒ(t p) 200 mW 10 3 160 K/W 120 100 80 60 40 20 0 0 RthJS 10 2 140 Ptot 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 20 40 60 80 100 120 °C 150 10 1 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 TS tp Permissible Pulse Load Ptotmax/P totDC = ƒ(tp) 10 2 Ptotmax /PtotDC - 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.1 0.5 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 2007-03-29 5 Package SOT143 BFP181 Package Outline 0.15 MIN. 2.9 ±0.1 1.9 4 3 B 1 ±0.1 0.1 MAX. 1.3 ±0.1 2.4 ±0.15 10˚ MAX. 1 2 10˚ MAX. 0.2 0.8 +0.1 -0.05 0.4 +0.1 -0.05 1.7 0.25 M B 0.08...0.1 A 5 0...8˚ 0.2 M A Foot Print 0.8 1.2 0.8 0.9 1.2 0.8 0.8 Marking Layout (Example) Manufacturer RF s Pin 1 56 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.9 1.1 2005, June Date code (YM) BFP181 Type code 4 0.2 Pin 1 3.15 2.6 8 1.15 2007-03-29 6 BFP181 Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 2007-03-29 7