BFR193W_07

BFR193W_07

  • 厂商:

    INFINEON

  • 封装:

  • 描述:

    BFR193W_07 - NPN Silicon RF Transistor - Infineon Technologies AG

  • 详情介绍
  • 数据手册
  • 价格&库存
BFR193W_07 数据手册
BFR193W NPN Silicon RF Transistor* • For low noise, high-gain amplifiers up to 2 GHz • For linear broadband amplifiers • fT = 8 GHz, F = 1 dB at 900 MHz • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 * Short term description 3 1 2 ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BFR193W Maximum Ratings Parameter Collector-emitter voltage Collector-emitter voltage Collector-base voltage Emitter-base voltage Collector current Base current Total power dissipation2) TS ≤ 63°C Junction temperature Ambient temperature Storage temperature Thermal Resistance Parameter Junction - soldering point 3) 1Pb-containing 2T 3For Marking RCs Pin Configuration 1=B 2=E 3=C Package SOT323 Symbol VCEO VCES VCBO VEBO IC IB Ptot Tj TA T stg Symbol RthJS Value 12 20 20 2 80 10 580 150 -55 ... 150 -55 ... 150 Value ≤ 150 Unit V mA mW °C Unit K/W package may be available upon special request is measured on the collector lead at the soldering point to the pcb S calculation of RthJA please refer to Application Note Thermal Resistance 1 2007-03-30 BFR193W Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter DC Characteristics Collector-emitter breakdown voltage IC = 1 mA, I B = 0 Collector-emitter cutoff current VCE = 20 V, VBE = 0 Collector-base cutoff current VCB = 10 V, I E = 0 Emitter-base cutoff current VEB = 1 V, IC = 0 DC current gainIC = 30 mA, VCE = 8 V, pulse measured hFE 70 100 140 IEBO 1 µA ICBO 100 nA ICES 100 µA V(BR)CEO 12 V Symbol min. Values typ. max. Unit 2 2007-03-30 BFR193W Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Values Unit Parameter min. typ. max. AC Characteristics (verified by random sampling) Transition frequency fT IC = 50 mA, VCE = 8 V, f = 500 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz, VBE = 0 , emitter grounded Collector emitter capacitance VCE = 10 V, f = 1 MHz, VBE = 0 , base grounded Emitter-base capacitance VEB = 0.5 V, f = 1 MHz, VCB = 0 , collector grounded Noise figure IC = 10 mA, VCE = 8 V, Z S = ZSopt , f = 900 MHz IC = 10 mA, VCE = 8 V, Z S = ZSopt , f = 1.8 GHz Power gain, maximum available1) IC = 30 mA, VCE = 8 V, Z S = ZSopt , ZL = ZLopt , f = 900 MHz IC = 30 mA, VCE = 8 V, Z S = ZSopt , ZL = ZLopt , f = 1.8 GHz Transducer gain IC = 30 mA, VCE = 8 V, Z S = ZL = 50Ω , f = 900 MHz IC = 30 mA, VCE = 8 V, Z S = ZL = 50Ω , f = 1.8 GHz 1G 6 - 8 0.74 1 GHz pF Ccb Cce - 0.28 - Ceb - 1.8 - F G ma |S 21e|2 13.5 8 16 10.5 1 1.6 - dB dB 1/2 ma = |S21 / S12| (k-(k²-1) ) 3 2007-03-30 BFR193W SPICE Parameter (Gummel-Poon Model, Berkley-SPICE 2G.6 Syntax): Transistor Chip Data: IS = VAF = NE = VAR = NC = RBM = CJE = TF = ITF = VJC = TR = MJS = XTI = 0.2738 24 1.935 3.8742 0.94371 1 1.1824 18.828 0.96893 1.1828 1.0037 0 3 fA V V Ω fF ps mA V ns BF = IKF = BR = IKR = RB = RE = VJE = XTF = PTF = MJC = CJS = NK = FC = 125 0.26949 14.267 0.037925 1.8368 0.76534 0.70276 0.69477 0 0.30002 0 0 0.72063 A A Ω V deg fF NF = ISE = NR = ISC = IRB = RC = MJE = VTF = CJC = XCJC = VJS = EG = TNOM 0.95341 10.627 1.4289 0.037409 0.91763 0.11938 0.48654 0.8 935.03 0.053563 0.75 1.11 300 fA fA mA Ω V fF V eV K All parameters are ready to use, no scalling is necessary. Extracted on behalf of Infineon Technologies AG by: Institut für Mobil- und Satellitentechnik (IMST) Package Equivalent Circuit: LBI = LBO = LEI = LEO = LCI = LCO = CBE = CCB = C CE = 0.57 0.4 0.43 0.5 0 0.41 61 101 175 nH nH nH fF fF fF fF fF fF Valid up to 6GHz For examples and ready to use parameters please contact your local Infineon Technologies distributor or sales office to obtain a Infineon Technologies CD-ROM or see Internet: http://www.infineon.com 4 2007-03-30 BFR193W Total power dissipation Ptot = ƒ(TS) Permissible Pulse Load RthJS = ƒ(t p) 600 mW 10 3 K/W 500 450 RthJS Ptot 400 350 300 250 200 150 100 50 0 0 20 40 60 80 100 120 °C 150 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 TS tp Permissible Pulse Load Ptotmax/P totDC = ƒ(tp) 10 2 Ptotmax /PtotDC - 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 5 2007-03-30 Package SOT323 BFR193W Package Outline 2 ±0.2 0.3 +0.1 -0.05 3 1.25 ±0.1 2.1 ±0.1 0.9 ±0.1 3x 0.1 M 0.1 MAX. 0.1 A 1 0.65 0.65 2 0.1 MIN. 0.15 +0.1 -0.05 0.2 M A Foot Print 0.6 0.8 0.65 0.65 Marking Layout (Example) Manufacturer 1.6 2005, June Date code (YM) Pin 1 BCR108W Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 Pin 1 2.15 2.3 8 1.1 6 2007-03-30 BFR193W Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 2007-03-30
BFR193W_07
物料型号: - 型号:BFR193W

器件简介: - BFR193W是一款NPN硅射频晶体管,适用于低噪声、高增益放大器,工作频率可达2GHz。 - 适用于线性宽带放大器。 - 短时描述:ESD(静电放电)敏感器件,需注意处理。

引脚分配: - 引脚配置:RCs 1 = B(基极) 2 = E(发射极) 3 = C(集电极) - 封装类型:SOT323

参数特性: - 最大额定值: - 集电极-发射极电压(VCEO):12V - 集电极-发射极电压(VCES):20V - 集电极-基极电压(VCBO):20V - 发射极-基极电压(VEBO):2V - 集电极电流(IC):80mA - 基极电流(IB):10mA - 总功率耗散(Ptot):580mW - 结温(Tj):150°C - 环境温度(TA):-55...150°C - 存储温度(Tstg):-55...150°C - 焊接点热阻(RthJS):≤150 K/W

功能详解: - 直流特性: - 集电极-发射极击穿电压(V(BR)CEO):12V - 集电极-发射极截止电流(ICES):100µA - 集电极-基极截止电流(ICBO):100nA - 发射极-基极截止电流(IEBO):1µA - 直流电流增益(hFE):70...140 - 交流特性: - 过渡频率(fT):6...8GHz - 集电极-基极电容(Ccb):0.74pF - 集电极-发射极电容(Cce):0.28pF - 发射极-基极电容(Ceb):1.8pF - 噪声系数(F):1...1.6dB - 最大可用功率增益(Gma):16...10.5 - 传感器增益(IS21el2):13.5...8dB

应用信息: - 该器件符合AEC Q101标准,并且是无铅(RoHS合规)封装。1Pb含量封装可按特殊要求提供。

封装信息: - 封装类型:SOT323
BFR193W_07 价格&库存

很抱歉,暂时无法提供与“BFR193W_07”相匹配的价格&库存,您可以联系我们找货

免费人工找货