BGF108C

Data Sheet, V2.0, December 2008 BGF108C 7 Channel LCD Filter Array with ESD Protection Small Signal Discretes Edition 2008-12-12 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2008. All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BGF108C BGF108C Revision History: 2008-12-12, V2.0 Previous Version:2008-10-14, V1.0 Page All Subjects (major changes since last revision) Preliminary status removed Data Sheet 3 V2.0, 2008-12-12 BGF108C 7 Channel LCD Filter Array with ESD Protection 7 Channel LCD Filter Array with ESD Protection Feature • 7 channel integrated RC filter array • ESD protection according to IEC61000-4-2 of 15 kV contact discharge on all IOs • Wafer Level Package with SnAgCu solder balls • 400 µm solder ball pitch • RoHS and WEEE compliant package • Improved package for increased drop test reliability A1 R1, 70Ω A2 R2, 70Ω B1 R3, 70Ω C1 R4, 70Ω C2 R5, 70Ω D1 R6, 70Ω D2 R7, 70Ω A4 A5 B5 C4 C5 D4 D5 A3 B3 C3 D3 Bgf108_schematic.vsd Figure 1 Description Schematic BGF108C is a 7 channel RC filter array to provide attenuation of undesired signals in the 800 - 2000 MHz range. All pins are protected against ESD of 15 kV according to IEC61000-4-2 (contact discharge). The wafer level package is a green package with a size of only 1.95 mm x 2.07 mm and a total height of 0.60 mm. The package has been improved for increased drop test reliability. Type BGF108C Package WLP-18-4 Marking GF108C Chip N0715 Data Sheet 4 V2.0, 2008-12-12 BGF108C 7 Channel LCD Filter Array with ESD Protection Table 1 Parameter Maximum Ratings Symbol Min. 0 -40 -65 -15 Values Typ. Max. 5 +85 +150 60 15 V °C °C mW kV Unit Note / Test Condition VP Operating temperature range TOP Storage temperature range TSTG Summed up input power for all pins PIN Electrostatic discharge according to IEC61000- VE Voltage at all pins to GND 4-21) at all pins 1) Contact discharge TS < 70 °C Table 2 Parameter Electrical Characteristics1) Symbol Min. Values Typ. 70 1 2 7 8.2 27 17 30 Max. 84 100 1000 Ω nA V pF 56 Unit Note / Test Condition Series Resistors R1... R10 Leakage current of each line to GND Breakdown Voltage of each line to GND Line capacitance of each line to GND 1) at TA = 25 °C R IR V(BR) CT VR = 3 V VR = 5 V I(BR) = 1 mA VR = 0 V VR = 3 V Line capacitance BGF108C 30 25 Line Capacitance [pF] 20 15 10 5 0 0 1 2 3 Voltage [V] 4 5 6 7 Figure 2 Capacitance of one line to GND versus DC voltage Data Sheet 5 V2.0, 2008-12-12 BGF108C 7 Channel LCD Filter Array with ESD Protection Insertion Loss BGF108C 0 -10 -20 dB -30 -40 -50 0,1 1 10 100 1000 10000 frequency [MHz] Figure 3 Typical filter characteristics of one filter channel (ZS = ZL = 50 Ω, VR = 0 V) Cross talk BGF108C 0 -20 -40 S21 [dB ] -60 -80 -100 -120 0,1 1 10 Frequency [MHz] 100 1000 10000 Figure 4 Typical cross talk between two filter channels (ZS = ZL = 50 Ω, VR = 0 V) Data Sheet 6 V2.0, 2008-12-12 BGF108C 7 Channel LCD Filter Array with ESD Protection Package Outline 2.02 ±0.05 (0.21±0.05) 0.6 ±0.05 0.2 ±0.05 STANDOFF 0.1 C D1 D2 C2 4 x 0.4 = 1.6 0.4 D3 C3 B3 A2 A3 A4 D4 C4 D5 B (0.21±0.05) (0.24 ±0.05) C5 B5 A5 A 3 x 0.4 = 1.2 SEATING PLANE 3) B1 A1 C 0.25 ±0.04 1) 18x ø0.05 M A B Pin A1 Corner Index Area 2) 0.08 C 18x COPLANARITY 1) Dimension is measured at the maximum solder ball diameter, parallel to primary datum C 2) Pin A1 corner identified by marking 3) Primary datum C and seating plane are defined by the spherical crowns of the balls WLP-18-1-N-PO V01 Figure 5 Package WLP-18-4 (dimensions in mm) Tape and reel specification 4 ±0.1 0.25 2.14 ±0.05 8 ±0.1 Pin 1 Corner Index Area 1.78 ±0.05 0.71±0.05 WLP-18-1-N-TP V01 Figure 6 Tape for WLP-18-4 (dimensions in mm) Data Sheet 7 3˚±2˚ (0.24 ±0.05) V2.0, 2008-12-12 1.68 ±0.05 C1 0.4