BGF109C

D a t a S he et , V 2. 0, A ug us t 2 00 8 B G F 10 9C 1 0 C h a n ne l L C D F i l te r A r r a y w i t h E S D P r o t e c t i o n S m a l l S i g n a l D i s c r et e s Edition 2008-08-05 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2008. All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BGF109C BGF109C Revision History: 2008-08-05, V2.0 Previous Version: 2008-07-17, V1.0 Page All Subjects (major changes since last revision) Preliminary status removed Data Sheet 3 V2.0, 2008-08-05 BGF109C 10 Channel LCD Filter Array with ESD Protection 10 Channel LCD Filter Array with ESD Protection Feature • 10 channel integrated RC filter array • ESD protection according to IEC61000-4-2 up to 15 kV contact discharge on all IOs • Wafer Level Package with SnAgCu solder balls • RoHS and WEEE compliant package • Improved package for increased drop test reliability A1 R1, 70 Ω A2 R2, 70 Ω B1 R3, 70 Ω B2 R4, 70 Ω C1 R5, 70 Ω C2 R6, 70 Ω D1 R7, 70 Ω D2 R8, 70 Ω E1 R9, 70 Ω E2 R10, 70 Ω A4 A5 B4 B5 C4 C5 D4 D5 E4 E5 A3 C3 D3 E3 Bgf109 C_schematic.vsd Figure 1 Description Schematic The BGF109C is a 10 channel RC filter array to provide attenuation of undesired signals in the 800 - 2000 MHz range. All pins are protected against ESD up to 15 kV according to IEC61000-4-2 (contact discharge). The wafer level package is a green package with a size of only 1.95 mm x 2.07 mm and a total height of 0.60 mm. The package has been improved for increased drop test reliability. Type BGF109C Package WLP-24-9 Marking BGF109C Chip N0716 Data Sheet 4 V2.0, 2008-08-05 BGF109C 10 Channel LCD Filter Array with ESD Protection Table 1 Parameter Maximum Ratings Symbol Min. -7 -40 -65 -15 Values Typ. Max. 7 +85 +150 60 15 V °C °C mW kV Unit Note / Test Condition VP Operating temperature range TOP TSTG Storage temperature range Summed up input power for all pins PIN Electrostatic discharge according to IEC61000- VE Voltage at all pins to GND 4-21) at all pins 1) Contact discharge TS < 70 °C Table 2 Parameter Electrical Characteristics1) Symbol Min. Values Typ. 70 28 17 Max. 84 30 100 Ω pF nA 56 Unit Note / Test Condition Series Resistors R1... R10 Line capacitance of each line to GND Leakage currents of lines to GND 1) at TA = 25 °C R CT IR VR = 0 V VR = 3 V VR = 3 V A1 R1, 70 Ω A2 R2, 70 Ω B1 R3, 70 Ω B2 R4, 70 Ω C1 R5, 70 Ω C2 R6, 70 Ω D1 R7, 70 Ω D2 R8, 70 Ω E1 R9, 70 Ω E2 R10, 70 Ω A4 A5 B4 B5 C4 C5 D4 D5 E4 E5 A3 C3 D3 E3 Bgf109C_schematic.vsd Figure 2 Schematic Data Sheet 5 V2.0, 2008-08-05 BGF109C 10 Channel LCD Filter Array with ESD Protection Line capacitance BGF109C 30 25 Capacitance [pF] 20 15 10 5 0 0 1 2 3 Voltage [V] 4 5 6 Figure 3 Capacitance of one line to GND versus DC voltage Insertion loss BGF109C 0 -10 S21 [dB] -20 -30 -40 -50 100E+3 1E+6 10E+6 freq [Hz] 100E+6 1E+9 10E+9 Figure 4 Typical filter characteristics of one filter channel (ZS = ZL = 50 Ω, VR = 0 V) Cross talk BGF109C 0 -20 -40 S21 [dB] -60 -80 -100 -120 100E+3 1E+6 10E+6 freq [Hz] 100E+6 1E+9 10E+9 Figure 5 Data Sheet Typical cross talk between two filter channels (ZS = ZL = 50 Ω, VR = 0 V) 6 V2.0, 2008-08-05 BGF109C 10 Channel LCD Filter Array with ESD Protection Package Outline 1.95 ±0.05 (0.175±0.05) 0.6 ±0.05 0.2 ±0.05 STANDOFF 0.1 C E1 E2 D2 C2 B2 A2 A3 4 x 0.4 = 1.6 B (0.175±0.05) 0.4 E3 D3 C3 E4 D4 C4 B4 A4 E5 D5 C5 B5 A5 (0.235±0.05) 4 x 0.4 = 1.6 (0.235±0.05) 0.4 A SEATING PLANE 3) D1 C1 B1 A1 C 0.25 ±0.04 1) Pin A1 Corner Index Area 2) 0.08 C 24x COPLANARITY 24x ø0.05 M A B 1) Dimension is measured at the maximum solder ball diameter, parallel to primary datum C 2) Pin A1 corner identified by marking 3) Primary datum C and seating plane are defined by the domed crowns of the balls WLP-24-9-N-PO V01 Figure 6 Package WLP-24-9 Tape and reel specification 4 ±0.1 0.25 2.24 ±0.05 8 ±0.1 Pin A1 Corner Index Area 2.24 ±0.05 0.75 WLP-24-9-N-TP V01 Figure 7 Tape for WLP-24-9 Data Sheet 7 V2.0, 2008-08-05 2.07 ±0.05