BGS13AL12

BGS13AL12 SP3T Antenna Switch with Antenna Termination Port Data Sheet Revision 1.1, 2009-06-25 Preliminary Industrial & Multimarket Edition 2009-06-25 Published by Infineon Technologies AG 81726 Munich, Germany © 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BGS13AL12 SP3T RF Switch BGS13AL12, SP3T Antenna Switch with Antenna Termination Port Revision History: 2009-06-25, Revision 1.1 Previous Revision: 2009-05-04, Revision 1.0 Page 9 11,12 13 14 Subjects (major changes since last revision) Converted to the new IFX FrameMaker Template. Pin13 Pin Description Electrical Specifications Application Board, Deembedding Board Pin Marking Trademarks of Infineon Technologies AG APOXI™, BlueMoon™, COMNEON™, CONVERGATE™, COSIC™, C166™, CROSSAVE™, CanPAK™, CIPOS™, CoolMOS™, CoolSET™, CORECONTROL™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPACK™, EconoPIM™, EiceDRIVER™, EUPEC™, FCOS™, FALC™, GEMINAX™, GOLDMOS™, HITFET™, HybridPACK™, ISAC™, ISOFACE™, IsoPACK™, my-d™, MIPAQ™, ModSTACK™, NovalithIC™, OmniTune™, OmniVia™, OPTIVERSE™, OptiMOS™, ORIGA™, PROFET™, PRO-SIL™, PrimePACK™, RASIC™, ReverSave™, SCEPTRE™, SEROCCO™, SICOFI™, SMARTi™, SMINT™, SOCRATES™, SatRIC™, SensoNor™, SINDRION™, SmartLEWIS™, SIEGET™, TrueNTRY™, TEMPFET™, TriCore™, thinQ!™, TRENCHSTOP™, VINAX™, VINETIC™, X-GOLD™, XMM™, X-PMU™, XPOSYS™, XWAY™. Other Trademarks AMBA™, ARM™, MULTI-ICE™, PRIMECELL™, REALVIEW™, THUMB™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO. OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Sattelite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited. Last Trademarks Update 2009-05-27 Preliminary Data Sheet 3 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Table of Contents Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1 2 3 3.1 4 4.1 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Signals Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Application Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Deembedding Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Preliminary Data Sheet 4 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch List of Figures List of Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Functional Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Pin Configuration (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Application Board with External Parallel Inductor L1 (15 nH) at Ant Port . . . . . . . . . . . . . . . . . . . . 13 Deembedding Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Pin Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Land Pattern and Stencil Mask. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Preliminary Data Sheet 5 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch List of Tables List of Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Pin Description (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Truth Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Operating Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ESD Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Electrical Characteristics (cont’d) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Preliminary Data Sheet 6 Revision 1.1, 2009-06-25 SP3T RF Switch BGS13AL12 GND 5 1 • • • • • • • • • • • Features RF1 Main Features: 3 high-linearity Rx ports with power handling capability of up to 30 dBm Antenna Termination Port No external decoupling components required Small leadless package TSLP12 High ESD robustness Low harmonic generation Low insertion loss High port-to-port-isolation 0.1 to 3.0 GHz coverage On-chip control logic supporting logic levels from 1.4 V to 3.0 V Lead and halogen free package (RoHS and WEEE compliant) GND ANT GND 7 6 RF2 4 3 Term RF3 GND 8 2 9 10 11 12 1 CTRLA Applications • • • • WCDMA diversity CDMA diversity Analog and Digital Tuner Band Switching Product Name SP3T RF Switch Preliminary Data Sheet Product Type BGS13AL12 7 Package PG-TSLP-12-3 Revision 1.1, 2009-06-25 CTRLB Vdd BGS13AL12 SP3T RF Switch Features Description The BGS13AL12 RF MOS switch is specifically designed for WCDMA diversity applications. An additional 4th port allows proper termination of the antenna when turned off. This SP3T offers low insertion loss and high robustness against interferer signals at the antenna port, while maintaining a very small size of only 2.0 x 2.0 mm² and a maximum height of only 0.4 mm The on-chip controller integrates CMOS logic and level shifters, driven by control inputs from 1.4 to 3.0 V. Unlike GaAs technology, external DC blocking capacitors at the RF Ports are only required if DC voltage is applied externally. The BGS13AL12 RF Switch is manufactured in Infineon’s patented MOS technology, offering the performance of GaAs with the economy and integration of conventional CMOS including the inherent higher ESD robustness. Ant RF1 RF2 RF3 Rext Decoder +ESD GND Vdd Ctrl A Ctrl B BGS 13A_F unctional_ D iagram m .vsd Figure 1 Functional Diagram Preliminary Data Sheet 8 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Signals Description 2 Table 1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Signals Description Pin Description (top view) Name GND RF3 Term RF2 GND RF1 GND Ant GND Vdd CTRL A CTRL B NC Pin Type GND I/O I/O I/O GND I/O GND I/O GND PWR I I NC Buffer Type Function Ground Rx RF port 3 Ext. Term Port Rx RF port 2 Ground Rx RF port 1 Ground Antenna port Ground Vdd supply Control pin A Control pin B For thermal reasons recommended to connect to Ground GND 5 RF1 6 RF2 4 3 GND ANT GND 7 Term RF3 GND 8 2 9 10 11 12 1 CTRLA CTRLB BGS 13A _Pinout.vsd Figure 2 Table 2 Function Ant → RF1 Ant → RF2 Ant → RF3 Ant → Term Pin Configuration (top view) Truth Table Ctrl A H L H L Ctrl B H H L L Preliminary Data Sheet Vdd 9 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Electrical Characteristics 3 Electrical Characteristics Table 3 Parameter Absolute Maximum Ratings Symbol Min. Values Typ. – – – Max. 150 3.2 32 °C V dBm -65 – – Unit Note / Test Condition – – – Storage Temperature Range DC Voltage at all pins to GND Tstg VDC Max RF power at antenna port, any RF port on PAnt IN max Table 4 Parameter Ambient Temperature RF Frequency Control Voltage low Control Voltage high Supply Voltage Max. Input (Reverse) Power at antenna pin Table 5 Parameter Human Body-Model IEC 61340-3-1, all pins Human Body-Model IEC 61340-3-1, antenna port ESD Ratings Symbol Operating Ranges Symbol Values Min. Typ. – – – – – – Max. 85 3 0.3 -30 0.1 -0.3 1.4 2.70 – Unit °C GHz V V V dBm Note / Test Condition – – – – – – TA f VCtrlL VCtrlH Vdd Pin Vdd 3.0 30 Values Min. Typ. – – Max. 500 1000 – – Unit V V Note / Test Condition – – Vmax Vmax ESD robustness of antenna port can be increased to 8 kV IEC-61000-4-2 with external protection circuit. Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. Preliminary Data Sheet 10 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Electrical Characteristics 3.1 • • • • • Electrical Specification Test Conditions: Termination port impedance: Z0 = 50 Ω Temperature range: TA = -30 °C...+85 °C Supply Voltage: Vdd = 2.8 V Pin = 15 dBm Across operating range of control voltages: VCtrH = 1.4...2.8 V Electrical Characteristics Symbol Min. Insertion Loss 824