BSC046N02KSG

BSC046N02KS G OptiMOS™2 Power-Transistor Features • For fast switching converters and sync. rectification • Qualified according to JEDEC1) for target applications • Super Logic level 2.5V rated; N-channel • Excellent gate charge x R DS(on) product (FOM) • Very low on-resistance R DS(on) • Superior thermal resistance • Avalanche rated • Pb-free plating; RoHS compliant •Halogen-free according to IEC61249-2-21 Product Summary V DS R DS(on),max ID 20 4.6 80 PG-TDSON-8 V mΩ A Type BSC046N02KS G Package PG-TDSON-8 Marking 046N02KS Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous drain current Symbol Conditions ID V GS=4.5 V, T C=25 °C V GS=4.5 V, T C=100 °C V GS=2.5 V, T C=25 °C V GS=2.5 V, T C=100 °C V GS=4.5 V, T A=25 °C, R thJA=45 K/W2) Value 80 50 60 38 19 200 151 6 ±12 Unit A Pulsed drain current Avalanche energy, single pulse Reverse diode d v /dt Gate source voltage 1) I D,pulse E AS dv /dt V GS T C=25 °C3) I D=50 A, R GS=25 Ω I D=50 A, V DS=16 V, di /dt =200 A/µs, T j,max=150 °C mJ kV/µs V J-STD20 and JESD22 Rev. 1.06 page 1 2010-07-01 BSC046N02KS G Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Power dissipation Symbol Conditions P tot T C=25 °C T A=25 °C, R thJA=45 K/W 2) Operating and storage temperature IEC climatic category; DIN IEC 68-1 T j, T stg Value 48 2.8 -55 ... 150 55/150/56 °C Unit W Parameter Symbol Conditions min. Values typ. max. Unit Thermal characteristics Thermal resistance, junction - case R thJC bottom top SMD version, device on PCB R thJA minimal footprint 6 cm2 cooling area2) Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage Zero gate voltage drain current V (BR)DSS V GS=0 V, I D=1 mA V GS(th) I DSS V DS=V GS, I D=110 µA V DS=20 V, V GS=0 V, T j=25 °C V DS=20 V, V GS=0 V, T j=125 °C Gate-source leakage current Drain-source on-state resistance I GSS R DS(on) V GS=12 V, V DS=0 V V GS=2.5 V, I D=30 A V GS=4.5 V, I D=50 A Gate resistance Transconductance 2) - - 2.6 18 K/W - - 62 45 20 0.7 - 0.95 - 1.2 1 V µA - 5.9 3.5 1.9 140 100 100 8.7 4.6 Ω S nA mΩ RG g fs |V DS|>2|I D|R DS(on)max, I D=50 A 70 Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. See figure 3 3) Rev. 1.06 page 2 2010-07-01 BSC046N02KS G Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics 4) Gate to source charge Gate charge at threshold Gate to drain charge Switching charge Gate charge total Gate plateau voltage Gate charge total, sync. FET Output charge Reverse Diode Diode continuous forward current Diode pulse current Diode forward voltage IS I S,pulse V SD T C=25 °C V GS=0 V, I F=50 A, T j=25 °C V R=10 V, I F=30A, di F/dt =100 A/µs 0.9 53 200 1.2 V A Q gs Q g(th) Q gd Q sw Qg V plateau Q g(sync) Q oss V DS=0.1 V, V GS=0 to 4.5 V V DD=10 V, V GS=0 V V DD=10 V, I D=30 A, V GS=0 to 4.5 V 6.5 3 4 7 21 2.1 19 13 8.6 3.9 5.9 10.6 27.6 25.3 V nC nC C iss C oss Crss t d(on) tr t d(off) tf V DD=10 V, V GS=4.5 V, I D=30 A, R G=1.6 Ω V GS=0 V, V DS=10 V, f =1 MHz 3100 910 158 15 117 34 6 4100 1200 210 ns pF Values typ. max. Unit Reverse recovery charge Q rr - 58 - nC 4) See figure 16 for gate charge parameter definition Rev. 1.06 page 3 2010-07-01 BSC046N02KS G 1 Power dissipation P tot=f(T C) 2 Drain current I D=f(T C); V GS≥4.5 V 50 100 40 80 30 60 P tot [W] 20 I D [A] 40 10 20 0 0 40 80 120 160 0 0 40 80 120 160 T C [°C] T C [°C] 3 Safe operating area I D=f(V DS); T C=25 °C; D =0 parameter: t p 103 limited by on-state resistance 4 Max. transient thermal impedance Z thJC=f(t p) parameter: D =t p/T 101 1 µs 0.5 10 µs 102 100 100 µs 0.2 0.1 1 ms Z thJC [K/W] 0.05 I D [A] DC 10 1 10 -1 0.02 0.01 10 ms single pulse 100 10-2 10-1 10 -1 10-3 10 0 10 1 10 2 10-6 10-5 10-4 10-3 10-2 10-1 100 V DS [V] t p [s] Rev. 1.06 page 4 2010-07-01 BSC046N02KS G 5 Typ. output characteristics I D=f(V DS); T j=25 °C parameter: V GS 200 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 °C parameter: V GS 12 11 2V 175 4V 10 9 3V 2.2 V 150 8 R DS(on) [mW] 125 7 6 5 4 3 4.5 V 4V 2.5 V I D [A] 100 2.5 V 3V 3.5 V 75 2.4 V 50 2.2 V 2 25 2V 1.8 V 1.6 V 1 0 3 0 10 20 30 40 50 0 0 1 2 V DS [V] I D [A] 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 75 8 Typ. forward transconductance g fs=f(I D); T j=25 °C 200 150 50 g fs [S] 25 25 °C 150 °C I D [A] 100 50 0 0 1 2 3 0 0 25 50 75 100 V GS [V] I D [A] Rev. 1.06 page 5 2010-07-01 BSC046N02KS G 9 Drain-source on-state resistance R DS(on)=f(T j); I D=50 A; V GS=4.5 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS 8 1.6 7 6 1.2 R DS(on) [mΩ ] 5 V GS(th) [V] 98% 1100 µA 4 typ 0.8 110 µA 3 2 0.4 1 0 -60 -20 20 60 100 140 0 -60 -20 20 60 100 140 T j [°C] T j [°C] 11 Typ. capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 104 103 102 Ciss 25 °C C [pF] 150 °C, 98% 103 Coss I F [A] 150 °C 101 25 °C, 98% 100 Crss 102 0 5 10 15 20 10-1 0 0.5 1 1.5 2 V DS [V] V SD [V] Rev. 1.06 page 6 2010-07-01 BSC046N02KS G 13 Avalanche characteristics I AS=f(t AV); R GS=25 Ω parameter: T j(start) 102 14 Typ. gate charge V GS=f(Q gate); I D=30 A pulsed parameter: V DD 5 25 °C 4 10 V 16 V 100 °C 3 101 125 °C 4V V GS [V] 2 1 0 103 0 I AV [A] 100 100 101 102 10 20 30 t AV [µs] Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 24 V GS Qg 22 V BR(DSS) [V] 20 V g s(th) 18 Q g(th) Q gs -60 -20 20 60 100 140 Q sw Q gd Q g ate 16 T j [°C] Rev. 1.06 page 7 2010-07-01 BSC046N02KS G Package Outline PG-TDSON-8: Outline PG-TDSON-8 Rev. 1.06 page 8 2010-07-01 BSC046N02KS G Package Outline PG-TDSON-8: Tape Dimensions in mm Rev. 1.06 page 9 2010-07-01 BSC046N02KS G Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.06 page 10 2010-07-01