BSC082N10LSG

BSC082N10LS G OptiMOS™2 Power-Transistor Features • N-channel, logic level • Excellent gate charge x R DS(on) product (FOM) • Very low on-resistance R DS(on) • 150 °C operating temperature • Pb-free lead plating; RoHS compliant • Qualified according to JEDEC1) for target application Product Summary V DS R DS(on),max ID 100 8.2 100 V mΩ A PG-TDSON-8 • Ideal for high-frequency switching and synchronous rectification • Halogen-free according to IEC61249-2-21 Type BSC082N10LS G Package PG-TDSON-8 Marking 082N10LS Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous drain current Symbol Conditions ID T C=25 °C T C=100 °C T A=25 °C, R thJA=45 K/W 2) Pulsed drain current3) Avalanche energy, single pulse Gate source voltage Power dissipation Operating and storage temperature IEC climatic category; DIN IEC 68-1 1) Value 100 65 13.8 400 377 ±20 Unit A I D,pulse E AS V GS P tot T j, T stg T C=25 °C I D=50 A, R GS=25 Ω mJ V W °C T C=25 °C 156 -55 ... 150 55/150/56 J-STD20 and JESD22 Rev. 1.07 page 1 2009-11-03 BSC082N10LS G Parameter Symbol Conditions min. Thermal characteristics Thermal resistance, junction - case R thJC bottom top Thermal resistance, junction - ambient R thJA minimal footprint 6 cm2 cooling area2) 0.8 18 62 45 K/W Values typ. max. Unit Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage Zero gate voltage drain current V (BR)DSS V GS=0 V, I D=1 mA V GS(th) I DSS V DS=V GS, I D=110 µA V DS=100 V, V GS=0 V, T j=25 °C V DS=100 V, V GS=0 V, T j=125 °C Gate-source leakage current Drain-source on-state resistance I GSS R DS(on) V GS=20 V, V DS=0 V V GS=4.5 V, I D=50 A V GS=10 V, I D=100 A Gate resistance Transconductance RG g fs |V DS|>2|I D|R DS(on)max, I D=50 A 100 1.2 1.85 0.01 2.4 1 µA V 60 10 1 8.2 6.8 1 119 100 100 11 8.2 Ω S nA mΩ 2 Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. 3) 2) see figure 3 Rev. 1.07 page 2 2009-11-03 BSC082N10LS G Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics 4) Gate to source charge Gate to drain charge Switching charge Gate charge total Gate plateau voltage Output charge Reverse Diode Diode continous forward current Diode pulse current Diode forward voltage Reverse recovery time Reverse recovery charge 4) Values typ. max. Unit C iss C oss C rss t d(on) tr t d(off) tf V DD=50 V, V GS=10 V, I D=25 A, R G=2.7 Ω V GS=0 V, V DS=50 V, f =1 MHz - 5600 710 38 19 24 53 12 7400 940 57 28 36 80 17 pF ns Q gs Q gd Q sw Qg V plateau Q oss V DD=50 V, V GS=0 V V DD=50 V, I D=25 A, V GS=0 to 10 V - 18 13 21 78 3.1 73 23 19 30 104 97 nC V nC IS I S,pulse V SD t rr Q rr T C=25 °C V GS=0 V, I F=50 A, T j=25 °C V R=50 V, I F=25 A, di F/dt =100 A/µs - 0.9 107 226 100 400 1.2 - A V ns nC See figure 16 for gate charge parameter definition Rev. 1.07 page 3 2009-11-03 BSC082N10LS G 1 Power dissipation P tot=f(T C) 2 Drain current I D=f(T C); V GS≥10 V 160 120 100 120 80 P tot [W] 80 I D [A] 0 40 80 120 160 60 40 40 20 0 0 0 40 80 120 160 T C [°C] T C [°C] 3 Safe operating area I D=f(V DS); T C=25 °C; D =0 parameter: t p 103 1 µs 10 µs 4 Max. transient thermal impedance Z thJC=f(t p) parameter: D =t p/T 100 0.5 102 100 µs 1 ms 0.2 DC Z thJC [K/W] I D [A] 10 1 10 ms 0.1 10-1 0.05 0.02 0.01 100 single pulse 10-1 10 -1 10-2 10 0 10 1 10 2 10 3 10-5 10-4 10-3 10-2 10-1 100 V DS [V] t p [s] Rev. 1.07 page 4 2009-11-03 BSC082N10LS G 5 Typ. output characteristics I D=f(V DS); T j=25 °C parameter: V GS 280 10 V 7.5 V 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 °C parameter: V GS 20 3V 240 6V 3.5 V 200 15 4.5 V 4V 160 R DS(on) [mΩ ] I D [A] 4V 10 4.5 V 7.5 V 10 V 120 80 3.5 V 5 40 3.2 V 0 0 1 2 3 4 5 0 0 50 100 150 V DS [V] I D [A] 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 160 8 Typ. forward transconductance g fs=f(I D); T j=25 °C 200 160 120 120 80 g fs [S] 80 150 °C 25 °C I D [A] 40 40 0 0 2 4 6 0 0 20 40 60 80 100 V GS [V] I D [A] Rev. 1.07 page 5 2009-11-03 BSC082N10LS G 9 Drain-source on-state resistance R DS(on)=f(T j); I D=50 A; V GS=10 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS parameter: I D 20 3 2.5 15 2 1100 µA R DS(on) [mΩ ] V GS(th) [V] 110 µA 10 98 % 1.5 typ 1 5 0.5 0 -60 -20 20 60 100 140 180 0 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 104 Ciss 1000 Coss 25 °C 10 3 100 150 °C C [pF] I F [A] 150 °C, 98% Crss 10 2 10 25 °C, 98% 101 0 20 40 60 80 1 0 0.5 1 1.5 2 V DS [V] V SD [V] Rev. 1.07 page 6 2009-11-03 BSC082N10LS G 13 Avalanche characteristics I AS=f(t AV); R GS=25 Ω parameter: T j(start) 100 14 Typ. gate charge V GS=f(Q gate); I D=25 A pulsed parameter: V DD 10 25 °C 8 80 V 50 V 100 °C 6 10 125 °C V GS [V] I AS [A] 20 V 4 2 1 1 10 100 1000 0 0 20 40 60 80 t AV [µs] Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 110 V GS Qg 105 V BR(DSS) [V] 100 V g s(th) 95 Q g(th) Q gs -60 -20 20 60 100 140 180 Q sw Q gd Q g ate 90 T j [°C] Rev. 1.07 page 7 2009-11-03 BSC082N10LS G Package Outline: PG-TDSON-8 Rev. 1.07 page 8 2009-11-03 BSC082N10LS G Dimensions in mm Rev. 1.07 page 9 2009-11-03 BSC082N10LS G Published by Infineon Technologies AG 81726 Munich, Germany © 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com ). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.07 page 10 2009-11-03