BSC205N10LSG

BSC205N10LS G OptiMOS™2 Power-Transistor Features • N-channel, logic level • Excellent gate charge x R DS(on) product (FOM) • Very low on-resistance R DS(on) • 150 °C operating temperature • Pb-free lead plating; RoHS compliant • Qualified according to JEDEC1) for target application Product Summary V DS R DS(on),max ID PG-TDSON-8 100 20.5 45 V mΩ A • Ideal for high-frequency switching and synchronous rectification • Halogen-free according to IEC61249-2-21 Type BSC205N10LS G Package PG-TDSON-8 Marking 205N10LS Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous drain current Symbol Conditions ID T C=25 °C T C=100 °C T A=25 °C, R thJA=50 K/W 2) Pulsed drain current3) Avalanche energy, single pulse Gate source voltage Power dissipation Operating and storage temperature IEC climatic category; DIN IEC 68-1 I D,pulse E AS V GS P tot T j, T stg T C=25 °C T C=25 °C I D=45 A, R GS=25 Ω Value 45 29 7.4 180 60 ±20 76 -55 ... 150 55/150/56 mJ V W °C Unit A Rev. 2.08 page 1 2009-11-04 BSC205N10LS G Parameter Symbol Conditions min. Thermal characteristics Thermal resistance, junction - case R thJC bottom top Thermal resistance, junction - ambient R thJA minimal footprint 6 cm2 cooling area 2) 1.6 18 62 50 K/W Values typ. max. Unit Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage Zero gate voltage drain current V (BR)DSS V GS=0 V, I D=1 mA V GS(th) I DSS V DS=V GS, I D=43 µA V DS=100 V, V GS=0 V, T j=25 °C V DS=100 V, V GS=0 V, T j=125 °C Gate-source leakage current Drain-source on-state resistance I GSS R DS(on) V GS=20 V, V DS=0 V V GS=4.5 V, I D=23 A V GS=10 V, I D=45 A Gate resistance Transconductance RG g fs |V DS|>2|I D|R DS(on)max, I D=45 A 100 1.2 1.85 0.01 2.4 1 µA V 36 10 1 20.5 16.9 1 72 100 100 28 20.5 Ω S nA mΩ 1) 2) J-STD20 and JESD22 2 Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. 3) see figure 3 Rev. 2.08 page 2 2009-11-04 BSC205N10LS G Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics 4) Gate to source charge Gate to drain charge Switching charge Gate charge total Gate plateau voltage Output charge Reverse Diode Diode continous forward current Diode pulse current Diode forward voltage Reverse recovery time Reverse recovery charge 4) Values typ. max. Unit C iss C oss C rss t d(on) tr t d(off) tf V DD=50 V, V GS=10 V, I D=25 A, R G=1.6 Ω V GS=0 V, V DS=50 V, f =1 MHz - 2200 270 17 14 24 30 4 2900 360 - pF ns Q gs Q gd Q sw Qg V plateau Q oss V DD=50 V, V GS=0 V V DD=50 V, I D=25 A, V GS=0 to 10 V - 8 5 9 31 3.5 28 41 37 nC V nC IS I S,pulse V SD t rr Q rr T C=25 °C V GS=0 V, I F=45 A, T j=25 °C V R=50 V, I F=25 A, di F/dt =100 A/µs - 1 86 238 45 180 1.2 - A V ns nC See figure 16 for gate charge parameter definition Rev. 2.08 page 3 2009-11-04 BSC205N10LS G 1 Power dissipation P tot=f(T C) 2 Drain current I D=f(T C); V GS≥10 V 80 50 40 60 30 P tot [W] 40 I D [A] 20 10 0 0 40 80 120 160 0 40 80 120 160 20 0 T C [°C] T C [°C] 3 Safe operating area I D=f(V DS); T C=25 °C; D =0 parameter: t p 103 4 Max. transient thermal impedance Z thJC=f(t p) parameter: D =t p/T 101 1 µs 10 µs 100 µs 102 100 0.5 Z thJC [K/W] 1 ms I D [A] 0.2 0.1 0.05 10 1 10 ms DC 10-1 0.02 0.01 10 0 single pulse 10-1 10 -1 10-2 10 0 10 1 10 2 10 3 10-5 10-4 10-3 10-2 10-1 V DS [V] t p [s] Rev. 2.08 page 4 2009-11-04 BSC205N10LS G 5 Typ. output characteristics I D=f(V DS); T j=25 °C parameter: V GS 160 10 V 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 °C parameter: V GS 35 3.5 V 30 4V 120 6V 4.5 V 7.5 V 4.5 V 25 R DS(on) [mΩ ] 20 7.5 V 10 V I D [A] 80 15 4V 40 3.5 V 3.2 V 10 5 0 0 1 2 3 4 5 0 0 50 100 150 V DS [V] I D [A] 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 160 8 Typ. forward transconductance g fs=f(I D); T j=25 °C 120 100 120 80 80 g fs [S] 150 °C 25 °C I D [A] 60 40 40 20 0 0 2 4 6 0 0 20 40 60 80 100 V GS [V] I D [A] Rev. 2.08 page 5 2009-11-04 BSC205N10LS G 9 Drain-source on-state resistance R DS(on)=f(T j); I D=45 A; V GS=10 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS parameter: I D 45 40 2.5 35 30 2 3 430 µA R DS(on) [mΩ ] 25 20 15 10 V GS(th) [V] 98 % 43 µA 1.5 typ 1 0.5 5 0 -60 -20 20 60 100 140 180 0 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 104 1000 Ciss 103 Coss 100 25 °C C [pF] I F [A] 150 °C 150 °C, 98% 102 Crss 10 25 °C, 98% 101 0 20 40 60 80 1 0 0.5 1 1.5 2 V DS [V] V SD [V] Rev. 2.08 page 6 2009-11-04 BSC205N10LS G 13 Avalanche characteristics I AS=f(t AV); R GS=25 Ω parameter: T j(start) 100 14 Typ. gate charge V GS=f(Q gate); I D=25 A pulsed parameter: V DD 10 8 80 V 25 °C 6 50 V V GS [V] I AS [A] 100 °C 10 20 V 125 °C 4 2 1 1 10 100 1000 0 0 10 20 30 t AV [µs] Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 110 V GS Qg 105 V BR(DSS) [V] 100 V g s(th) 95 Q g(th) Q gs -60 -20 20 60 100 140 180 Q sw Q gd Q g ate 90 T j [°C] Rev. 2.08 page 7 2009-11-04 BSC205N10LS G Package Outline: PG-TDSON-8 Rev. 2.08 page 8 2009-11-04 BSC205N10LS G Dimensions in mm Rev. 2.08 page 9 2009-11-04 BSC205N10LS G Published by Infineon Technologies AG 81726 Munich, Germany © 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com ). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 2.08 page 10 2009-11-04