BSF024N03LT3G

BSF024N03LT3 G OptiMOSTM3 Power-MOSFET Features • Optimized for high switching frequency DC/DC converter • Very low on-resistance R DS(on) • Excellent gate charge x R DS(on) product (FOM) • Low parasitic inductance • Low profile (2|I D|R DS(on)max, I D=30 A 55 Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev. 2.0 page 2 2009-06-16 BSF024N03LT3 G Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics 6) Gate to source charge Gate charge at threshold Gate to drain charge Switching charge Gate charge total Gate plateau voltage Gate charge total Q gs Q g(th) Q gd Q sw Qg V plateau Qg V DD=15 V, I D=30 A, V GS=0 to 10 V V DS=0.1 V, V GS=0 to 4.5 V V DD=15 V, V GS=0 V V DD=15 V, I D=30 A, V GS=0 to 4.5 V 11.9 6.6 5.8 11.1 26 2.9 53 34 71 V nC C iss C oss Crss t d(on) tr t d(off) tf V DD=15 V, V GS=10 V, I D=30 A, R G=1.6 Ω V GS=0 V, V DS=15 V, f =1 MHz 4100 1730 84 5.7 5.6 29 4.8 5500 2300 ns pF Values typ. max. Unit Gate charge total, sync. FET Output charge Reverse Diode Diode continuous forward current Diode pulse current Diode forward voltage Q g(sync) Q oss - 22 36 - nC IS I S,pulse V SD T C=25 °C V GS=0 V, I F=30 A, T j=25 °C V R=15 V, I F=I S, di F/dt =400 A/µs - 0.81 38 400 A V Reverse recovery charge 6) Q rr - - 28 nC See figure 16 for gate charge parameter definition Rev. 2.0 page 3 2009-06-16 BSF024N03LT3 G 1 Power dissipation P tot=f(T C) 2 Drain current I D=f(T C); V GS≥10 V 50 120 40 80 30 P tot [W] 20 40 10 0 0 40 80 120 160 I D [A] 0 0 40 80 120 160 T C [°C] T C [°C] 3 Safe operating area I D=f(V DS); T C=25 °C; D =0 parameter: t p 103 limited by on-state resistance 4 Max. transient thermal impedance Z thJC=f(t p) parameter: D =t p/T 101 1 µs 10 µs 0.5 102 100 µs 100 0.2 0.1 0.05 0.02 0.01 101 Z thJC [K/W] I D [A] DC 1 ms 10-1 10 ms 100 10-2 single pulse 10-1 10 -1 10-3 10 0 10 1 10 2 10-6 10-5 10-4 10-3 10-2 10-1 100 V DS [V] t p [s] Rev. 2.0 page 4 2009-06-16 BSF024N03LT3 G 5 Typ. output characteristics I D=f(V DS); T j=25 °C parameter: V GS 400 5V 10 V 4.5 V 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 °C parameter: V GS 12 320 8 R DS(on) [mΩ ] 240 3V 3.2 V 3.5 V I D [A] 4V 160 4 3.5 V 4.5 V 4V 7V 3.2 V 3V 2.8 V 10 V 5V 80 0 0 1 2 3 0 0 10 20 30 40 50 V DS [V] I D [A] 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 160 8 Typ. forward transconductance g fs=f(I D); T j=25 °C 240 140 200 120 160 100 80 g fs [S] 150 °C 25 °C I D [A] 120 60 80 40 40 20 0 0 1 2 3 4 5 0 0 40 80 120 160 V GS [V] I D [A] Rev. 2.0 page 5 2009-06-16 BSF024N03LT3 G 9 Drain-source on-state resistance R DS(on)=f(T j); I D=20 A; V GS=10 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS; I D=250 µA 6 2.5 5 2 4 R DS(on) [mΩ ] 3 98 % V GS(th) [V] typ 1.5 1 2 1 0.5 0 -60 -20 20 60 100 140 180 0 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 104 1000 25 °C Ciss Coss 150 °C, 98% 103 100 150 °C 25 °C, 98% C [pF] 102 Crss I F [A] 10 101 0 10 20 30 1 0.0 0.5 1.0 1.5 2.0 V DS [V] V SD [V] Rev. 2.0 page 6 2009-06-16 BSF024N03LT3 G 13 Avalanche characteristics I AS=f(t AV); R GS=25 Ω parameter: T j(start) 100 14 Typ. gate charge V GS=f(Q gate); I D=30 A pulsed parameter: V DD 12 10 6V 15 V 25 °C 24 V 8 125 °C 100 °C 10 V GS [V] 1 10 100 1000 I AV [A] 6 4 2 1 0 0 10 20 30 40 50 60 t AV [µs] Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 34 V GS 32 Qg 30 V BR(DSS) [V] 28 26 V g s(th) 24 22 Q g(th) Q gs -60 -20 20 60 100 140 180 Q sw Q gd Q g ate 20 T j [°C] Rev. 2.0 page 7 2009-06-16 BSF024N03LT3 G Package Outline Rev. 2.0 page 8 2009-06-16 BSF024N03LT3 G Package Outline PG-TDSON-8: Tape CanPAK Dimensions in mm Rev. 2.0 page 9 2009-06-16 BSF024N03LT3 G Dimensions in mm Recommended stencil thikness 150 µm Rev. 2.0 page 10 2009-06-16 BSF024N03LT3 G Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 2.0 page 11 2009-06-16