BSO203PH

BSO203P H OptiMOS® P-Power-Transistor Features • dual P-Channel in SO8 • Qualified according JEDEC for target applications • 150°C operating temperature • Super Logic Level (2.5V rated) Product Summary V DS R DS(on),max V GS=4.5 V V GS=2.5 V ID -20 21 34 -8.2 A V mΩ • Pb-free plating; RoHS compliant, Halogen-free according to IEC61249-2-21 PG-DSO-8 Type BSO203P H Package PG-DSO-8 Marking 203P Lead free Yes Halogen free Yes Packing dry Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions 10 secs Continuous drain current 1) ID V GS=4.5 V, T A=25 °C V GS=4.5 V, T A=70 °C V GS=2.5 V, T A=25 °C V GS=2.5 V, T A=70 °C Pulsed drain current2) Avalanche energy, single pulse Gate source voltage Power dissipation1) Operating and storage temperature ESD class Soldering temperature IEC climatic category; DIN IEC 68-1 Rev.1.31 page 1 I D,pulse E AS V GS P tot T j, T stg JESD22-A114 HBM T A=25 °C 2.0 -55 ... 150 1B (500V - 1 kV) 260 55/150/56 2010-02-15 °C T A=25 °C I D=-8.2 A, R GS=25 Ω -8.2 -6.6 -6.5 -5.2 -32.8 97 ±12 1.6 mJ V W °C Value steady state -7.0 -5.8 -5.7 -4.6 A Unit BSO203P H Parameter Symbol Conditions min. Thermal characteristics Thermal resistance, junction - soldering point Thermal resistance, junction - ambient R thJS R thJA minimal footprint, t p≤10 s minimal footprint, steady state 6 cm2 cooling area1), t p≤10 s 6 cm2 cooling area1), steady state Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage Zero gate voltage drain current V (BR)DSS V GS(th) I DSS V GS=0 V, I D= 0.25 mA V DS=V GS, I D= -100 µA V DS= -20 V, V GS=0 V, T j=25 °C V DS= -20 V, V GS=0 V, T j=150 °C Gate-source leakage current Drain-source on-state resistance I GSS R DS(on) V GS= -12 V, V DS=0 V V GS=2.5 V, I D=-6.5 A V GS=4.5 V, I D=-8.2 A Gate resistance Transconductance 1) Values typ. max. Unit - - 50 K/W - - 110 150 62.5 - - 80 -20 -0.6 - -0.9 - -1.2 -1 V µA - - -100 - 22 15 3.3 33 -100 34 21 - nA mΩ RG g fs |V DS|>2|I D|R DS(on)max, I D=-6.5 A Ω S 18 Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. See figure 3 for more detailed information See figure 13 for more detailed information 2) 3) Rev.1.31 page 2 2010-02-15 BSO203P H Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics 4) Gate to source charge Gate charge at threshold Gate to drain charge Switching charge Gate charge total Gate plateau voltage Output charge Reverse Diode Diode continuous forward current Diode pulse current Diode forward voltage Reverse recovery time Reverse recovery charge 4) Values typ. max. Unit C iss C oss Crss t d(on) tr t d(off) tf V DD= -10 V, V GS=4.5 V, I D=8.2 A, R G= 6 Ω V GS=0 V, V DS=15 V, f =1 MHz - 2500 820 680 16 55 45 74 3750 1230 1020 24 83 68 111 pF ns Q gs Q g(th) Q gd Q sw Qg V plateau Q oss V DD=10 V, V GS=0 V V DD=10 V, I D=-8.2 A, V GS=0 to 4.5 V - -4 -4 -10 -10 -26 -1.6 15 -6 -6 -16 -16 -39 20 nC V nC IS I S,pulse V SD t rr Q rr T A=25 °C V GS=0 V, I F=-8.2 A, T j=25 °C V R=10 V, I F=I D , di F/dt =100 A/µs - 26 14 2.5 32.8 1.1 39 21 A V ns nC See figure 16 for gate charge parameter definition Rev.1.31 page 3 2010-02-15 BSO203P H 1 Power dissipation P tot=f(T A); t p≤10 s 2 Drain current I D=f(T A); t p≤10 s parameter: V GS 2.5 10 9 2 8 7 1.5 6 4.5 V P tot [W] -I D [A] 1 0.5 0 0 40 80 120 160 5 4 3 2 1 0 0 40 80 T A [°C] 120 160 T A [°C] 3 Safe operating area I D=f(V DS); T A=25 °C1); D =0 parameter: t p 102 limited by on-state resistance 10 µs 100 µs 4 Max. transient thermal impedance Z thJA=f(t p)1) parameter: D =t p/T 102 0.5 0.2 101 101 1 ms 0.1 0.05 I D [A] 10 ms Z thJA [K/W] 0.02 100 0.01 single pulse 100 DC 100 ms 10-1 10-1 10 -1 10-2 10 0 10 1 10 2 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 V DS [V] t p [s] Rev.1.31 page 4 2010-02-15 BSO203P H 5 Typ. output characteristics I D=f(V DS); T j=25 °C parameter: V GS 60 10 V 3V 2.5V 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 °C parameter: V GS 50 45 40 35 50 4.5V 40 2.5 V 30 R DS(on) [mΩ ] 30 25 20 15 10 3.0 V 3.5V 4.5 V 10 V -I D [A] 2V 20 10 1.5V 5 0 0 0 1 2 3 4 5 6 7 8 9 10 0 10 20 30 40 50 -V DS [V] -I D [A] 10 V 60 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 35 8 Typ. forward transconductance g fs=f(I D); T j=25 °C 60 30 25 40 20 -I D [A] 15 150 °C g fs [S] 20 25°C 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 0 0 5 10 15 20 25 30 35 40 -V GS [V] I D [A] Rev.1.31 page 5 2010-02-15 BSO203P H 9 Drain-source on-state resistance R DS(on)=f(T j); I D=-8.2 A; V GS= -4.5 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS; I D= -100 µA 30 1.4 25 98 % 1.2 20 1 typ R DS(on) [mΩ ] -V GS(th) [V] 60 100 140 15 0.8 0.6 10 0.4 5 0.2 0 -60 -20 20 0 -60 -20 20 60 100 140 T j [°C] T j [°C] 11 Typ. capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 104 102 25 °C Ciss 10 1 150 °C 25 °C, 98% C [pF] 103 Coss Crss I F [A] 150 °C, 98% 100 102 0 10 20 30 10-1 0 0.5 1 1.5 2 -V DS [V] V SD [V] Rev.1.31 page 6 2010-02-15 BSO203P H 13 Avalanche characteristics I AS=f(t AV); R GS=25 Ω parameter: T j(start) 100 14 Typ. gate charge V GS=f(Q gate); I D=8.2 A pulsed parameter: V DD 10 9 8 7 25 °C 4V 10V 16 V 10 6 I AV [A] 100 °C 125 °C V GS [V] 1000 5 4 1 3 2 1 0.1 1 10 100 0 0 20 40 60 t AV [µs] -Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 23 V GS 22.5 22 21.5 Qg -V BR(DSS) [V] 21 20.5 20 19.5 19 V g s(th) Q g(th) 18.5 18 -60 -20 20 60 100 140 180 Q sw Q gs Q gd Q g ate T j [°C] Rev.1.31 page 7 2010-02-15 BSO203P H Package Outline PG-DSO-8: Outline Footprint Dimensions in mm Rev.1.31 page 8 2010-02-15 BSO203P H Published by Infineon Technologies AG 81726 Munich, Germany © 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev.1.31 page 9 2010-02-15