ESD5V3S5USE6727

ESD5V0SxUS Multi-Channel TVS Diode Array • ESD / transient protection of data and power lines in 3.3 V / 5 V application according to: IEC61000-4-2 (ESD): ± 30 KV (contact) IEC61000-4-4 (EFT): 80 A (5/50 ns) IEC61000-4-5 (Surge): 10 A (8/20 µs) • Working voltage: 5 V (5.3 V max.) • Low clamping voltage • Low reverse current < 5 µA • Pb-free (RoHS compliant) package • Qualified according AEC Q101 Applications • Uni or bi-directional operation possible (see application example page 5) • Mobile communication • Consumer products (STB, MP3, DVD, DSC...) • LCD displays, camera • Notebooks and desktop computers, peripherals ESD5V0S4US 6 5 4 ESD5V0S5US 6 5 4 ESD5V0S5US E6727 180° rotated in reel 1 6 2 5 3 Type ESD5V0S4US ESD5V0S5US ESD5V3S5US E6727* * Preliminary data Package SOT363 SOT363 SOT363 Configuration 4 lines, uni-directional 5 lines, uni-directional 5 lines, uni-directional 1 4 1 2 3 1 2 3 Marking E4s E5s on request 2007-12-11 ESD5V0SxUS Maximum Ratings at TA = 25°C, unless otherwise specified Parameter ESD contact discharge per diode1) Peak pulse current (tp = 8 / 20 µs) per diode2) Peak pulse power (tp = 8 / 20 µs) per diode Operating temperature range Storage temperature Symbol VESD I pp P pk T op T stg Value 30 10 130 -55...125 -65...150 Unit kV A W °C Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Characteristics Reverse working voltage Breakdown voltage I(BR) = 1 mA VRWM V(BR) IR Symbol min. 5.7 Values typ. 5 6.7 max. 5.3 7.7 Unit V Reverse current VR = 3.3 V VR = 5 V µA 7 10.5 1 3.5 70 35 1 5 V 9 13 3 6 pF 90 55 Clamping voltage (positive transients) IPP = 1 A, tp = 8/20 µs2) IPP = 10 A, tp = 8/20 µs2) VCL Forward clamping voltage (negative transients) IPP = 1 A, tp = 8/20 µs2) IPP = 10 A, tp = 8/20 µs2) VFC CT Diode capacitance VR = 0 V, f = 1 MHz VR = 5 V, f = 1 MHz 1V 2I ESD according to IEC61000-4-2 pp according to IEC61000-4-5 2 2007-12-11 ESD5V0SxUS Power derating curve Ppk = ƒ (TA) Clamping voltage, V cl = ƒ(Ipp) tp = 8 / 20 µs (positive transients) 13 V 11 10 80 70 60 50 40 30 20 10 0 0 25 50 75 100 °C 110 % 90 Ppk or Ipp 9 V cl 8 7 6 5 4 3 2 1 150 0 0 1 2 3 4 5 6 7 8 A 10 TA Ipp Forward clamping voltage VFC = ƒ (Ipp) tp = 8 / 20 µs (negative transients) 13 V 11 10 Reverse current IR = ƒ(VR) TA = Parameter 10 -6 A 10 -7 VFC 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 A 10 -8 TA = 125°C 85°C 25°C IR 10 -9 10 -10 10 10 -11 0 1 2 3 V 5 Ipp VR 3 2007-12-11 ESD5V0SxUS Normalized reverse voltage VBR(TA)/VBR(25°C)= ƒ(TA) IR = 1 mA 1.06 90 pF Diode capacitance CT = ƒ (VR) f = 1MHz V BR(Ta)/VBR(25°C) 1.04 1.03 70 CT 60 50 40 30 20 0 1.02 1.01 1 0.99 0.98 0.97 0.96 0.95 -50 -25 0 25 50 75 100 °C 150 TA 1 2 3 V 5 VR 4 2007-12-11 ESD5V0SxUS Application example ESD5V0S5US 5 channels, uni-directional 5 protected signal lines, level 0 ... +5.3V Connector I/O I/O I/O I/O I/O ESD sensitive device 3 2 1 4 5 6 The protection diode should be placed very close to the location where the ESD or other transients can occur to keep loops and inductances as small as possible. Pin 5 should be connected directly to a ground plane on the board. Application example ESD5V0S5US 4 channels, bi-directional Connector 4 protected signal lines, level -5.3V ... +5.3V I/O I/O I/O I/O ESD sensitive device 6 5 4 For bi-directional protection pin 2 (or any other pin except pin 5) should be connected directly to a ground plane on the board. Pin 5 is not connected. Total clamping voltage is the sum of VCL + VFC (see table on page 2). 1 2 3 Application example ESD5V0S4US 4 channels, uni-directional Connector 4 protected signal lines, level 0 … +5.3V I/O I/O I/O I/O ESD sensitive device 3 2 1 Pin 2 and pin 5 should be connected directly to a ground plane on the board. 4 5 6 5 2007-12-11 Package SOT363 ESD5V0SxUS Package Outline 2 ±0.2 0.2 -0.05 +0.1 0.9 ±0.1 6x 0.1 4 1.25 ±0.1 2.1 ±0.1 M 0.1 MAX. 0.1 A 6 5 Pin 1 marking 1 2 3 0.1 MIN. 0.65 0.65 0.2 M 0.15 +0.1 -0.05 A Foot Print 0.3 0.9 0.7 0.65 0.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. 1.6 Manufacturer 2005, June Date code (Year/Month) Pin 1 marking Laser marking BCR108S Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel For symmetric types no defined Pin 1 orientation in reel. 4 0.2 2.3 8 Pin 1 marking 2.15 1.1 6 2007-12-11 ESD5V0SxUS Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 2007-12-11