IPU060N03LG

Type IPD060N03L G IPS060N03L G IPF060N03L G IPU060N03L G OptiMOS 3 Power-Transistor ™ Product Summary V DS R DS(on),max ID 30 6 50 V mΩ A Features • Fast switching MOSFET for SMPS • Optimized technology for DC/DC converters • Qualified according to JEDEC for target applications • N-channel, logic level • Excellent gate charge x R DS(on) product (FOM) • Very low on-resistance R DS(on) • Avalanche rated • Pb-free plating 1) IPD060N03L G Type • Avalanche rated • Pb-free plating; RoHS compliant IPF060N03L G IPS060N03L G IPU060N03L G Package Marking PG-TO252-3 060N03L PG-TO252-3-23 060N03L PG-TO251-3-11 060N03L PG-TO251-3 060N03L Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous drain current Symbol Conditions ID V GS=10 V, T C=25 °C V GS=10 V, T C=100 °C V GS=4.5 V, T C=25 °C V GS=4.5 V, T C=100 °C Pulsed drain current2) Avalanche current, single pulse 3) Avalanche energy, single pulse Reverse diode d v /dt Gate source voltage 1) Value 50 50 50 43 350 50 60 6 ±20 Unit A I D,pulse I AS E AS dv /dt V GS T C=25 °C T C=25 °C I D=20 A, R GS=25 Ω I D=50 A, V DS=24 V, di /dt =200 A/µs, T j,max=175 °C mJ kV/µs V J-STD20 and JESD22 Rev. 2.0 page 1 2010-02-23 IPD060N03L G IPS060N03L G Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Power dissipation Operating and storage temperature IEC climatic category; DIN IEC 68-1 Symbol Conditions P tot T j, T stg T C=25 °C Value 56 IPF060N03L G IPU060N03L G Unit W °C -55 ... 175 55/175/56 Parameter Symbol Conditions min. Values typ. max. Unit Thermal characteristics Thermal resistance, junction - case SMD version, device on PCB R thJC R thJA minimal footprint 6 cm² cooling area 4) Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage Zero gate voltage drain current V (BR)DSS V GS=0 V, I D=1 mA V GS(th) I DSS V DS=V GS, I D=250 µA V DS=30 V, V GS=0 V, T j=25 °C V DS=30 V, V GS=0 V, T j=125 °C Gate-source leakage current Drain-source on-state resistance 5) - - 2.7 75 50 K/W 30 1 - 0.1 2.2 1 V µA - 10 10 7.2 5 1.4 67 100 100 9 6 Ω S nA mΩ I GSS R DS(on) V GS=20 V, V DS=0 V V GS=4.5 V, I D=30 A V GS=10 V, I D=30 A Gate resistance Transconductance 2) 3) 4) RG g fs |V DS|>2|I D|R DS(on)max, I D=30 A 34 See figure 3 for more detailed information See figure 13 for more detailed information Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Measured from drain tab to source pin 5) Rev. 2.0 page 2 2010-02-23 IPD060N03L G IPS060N03L G Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics 6) Gate to source charge Gate charge at threshold Gate to drain charge Switching charge Gate charge total Gate plateau voltage Gate charge total Q gs Q g(th) Q gd Q sw Qg V plateau Qg V DD=15 V, I D=30 A, V GS=0 to 10 V V DS=0.1 V, V GS=0 to 4.5 V V DD=15 V, V GS=0 V V DD=15 V, I D=30 A, V GS=0 to 4.5 V 5.6 2.8 2.5 5.3 10.8 3.2 22 C iss C oss Crss t d(on) tr t d(off) tf V DD=15 V, V GS=10 V, I D=30 A, R G=1.6 Ω V GS=0 V, V DS=15 V, f =1 MHz 1700 640 35 5 3 20 3 Values typ. IPF060N03L G IPU060N03L G Unit max. 2300 850 52 - pF ns 14.4 30 nC V Gate charge total, sync. FET Output charge Reverse Diode Diode continuous forward current Diode pulse current Diode forward voltage Q g(sync) Q oss - 9.4 17 - nC IS I S,pulse V SD T C=25 °C V GS=0 V, I F=30 A, T j=25 °C V R=15 V, I F=I S, di F/dt =400 A/µs - 0.88 50 350 1.1 A V Reverse recovery charge Q rr - - 10 nC 6) See figure 16 for gate charge parameter definition Rev. 2.0 page 3 2010-02-23 IPD060N03L G IPS060N03L G 1 Power dissipation P tot=f(T C) 2 Drain current I D=f(T C); V GS≥10 V IPF060N03L G IPU060N03L G 60 60 50 50 40 40 P tot [W] 30 I D [A] 0 50 100 150 200 30 20 20 10 10 0 0 0 50 100 150 200 T C [°C] T C [°C] 3 Safe operating area I D=f(V DS); T C=25 °C; D =0 parameter: t p 103 limited by on-state resistance 4 Max. transient thermal impedance Z thJC=f(t p) parameter: D =t p/T 10 1 µs 102 DC 10 µs 0.5 100 µs 1 Z thJC [K/W] 0.2 0.1 0.05 0.02 I D [A] 101 1 ms 10 ms 0.1 0.01 single pulse 100 10-1 10-1 100 101 102 0.01 0 0 0 0 0 0 1 10-6 10-5 10-4 10-3 10-2 10-1 100 V DS [V] t p [s] Rev. 2.0 page 4 2010-02-23 IPD060N03L G IPS060N03L G 5 Typ. output characteristics I D=f(V DS); T j=25 °C parameter: V GS 120 5V 4.5 V IPF060N03L G IPU060N03L G 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 °C parameter: V GS 20 100 10 V 3V 16 4V 3.5 V 80 3.2 V R DS(on) [mΩ ] 12 4V I D [A] 60 3.5 V 8 4.5 V 10 V 5V 40 3.2 V 20 3V 2.8 V 4 11.5 V 0 0 1 2 3 0 0 20 40 60 80 100 V DS [V] I D [A] 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 100 8 Typ. forward transconductance g fs=f(I D); T j=25 °C 100 80 80 60 60 40 g fs [S] 40 20 175 °C 25 °C I D [A] 20 0 0 1 2 3 4 5 0 0 20 40 60 80 100 V GS [V] I D [A] Rev. 2.0 page 5 2010-02-23 IPD060N03L G IPS060N03L G 9 Drain-source on-state resistance R DS(on)=f(T j); I D=30 A; V GS=10 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS; I D=250 µA IPF060N03L G IPU060N03L G 12 2.5 10 2 8 R DS(on) [mΩ ] 98 % 6 typ V GS(th) [V] 100 140 180 1.5 1 4 2 0.5 0 -60 -20 20 60 0 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 104 10000 1000 Ciss 103 1000 Coss 100 25 °C 175 °C, 98% C [pF] I F [A] 175 °C 25 °C, 98% 102 100 10 Crss 101 10 1 5 10 15 20 25 30 0.0 0.5 1.0 1.5 2.0 0 V DS [V] V SD [V] Rev. 2.0 page 6 2010-02-23 IPD060N03L G IPS060N03L G 13 Avalanche characteristics I AS=f(t AV); R GS=25 Ω parameter: T j(start) 100 IPF060N03L G IPU060N03L G 14 Typ. gate charge V GS=f(Q gate); I D=30 A pulsed parameter: V DD 12 15 V 6V 24 V 10 150 °C 100 °C 25 °C 8 V GS [V] 100 101 102 103 I AV [A] 10 6 4 2 1 10-1 0 0 5 10 15 20 25 30 t AV [µs] Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 34 V GS 32 Qg 30 V BR(DSS) [V] 28 26 V g s(th) 24 22 Q g(th) Q gs -60 -20 20 60 100 140 180 Q sw Q gd Q g ate 20 T j [°C] Rev. 2.0 page 7 2010-02-23 IPD060N03L G IPS060N03L G Package Outline PG-TO252-3 IPF060N03L G IPU060N03L G Rev. 2.0 page 8 2010-02-23 IPD060N03L G IPS060N03L G Package Outline PG-TO251-3-11: Outline PG-TO252-3-23 IPF060N03L G IPU060N03L G PG-TO251-3-21: Outline Rev. 2.0 page 9 2010-02-23 IPD060N03L G IPS060N03L G Package Outline PG-TO251-3-11 IPF060N03L G IPU060N03L G Rev. 2.0 page 10 2010-02-23 IPD060N03L G IPS060N03L G Package Outline PG-TO251-3-11: Outline PG-TO251-3 IPF060N03L G IPU060N03L G PG-TO251-3-21: Outline Rev. 2.0 page 11 2010-02-23 IPD060N03L G IPS060N03L G Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). IPF060N03L G IPU060N03L G Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 2.0 page 12 2010-02-23