IPU090N03LG

Type IPD090N03L G IPS090N03L G IPF090N03L G IPU090N03L G OptiMOS®3 Power-Transistor Features • Fast switching MOSFET for SMPS • Optimized technology for DC/DC converters • Qualified according to JEDEC for target applications • N-channel, logic level • Excellent gate charge x R DS(on) product (FOM) • Very low on-resistance R DS(on) • Avalanche rated • Pb-free plating; RoHS compliant IPD090N03L G Type • Avalanche rated • Pb-free plating; RoHS compliant IPF090N03L G 1) Product Summary V DS R DS(on),max ID 30 9 40 V mΩ A IPS090N03L G IPU090N03L G Package Marking PG-TO252-3-11 090N03L PG-TO252-3-23 090N03L PG-TO251-3-11 090N03L PG-TO251-3-21 090N03L Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous drain current Symbol Conditions ID V GS=10 V, T C=25 °C V GS=10 V, T C=100 °C V GS=4.5 V, T C=25 °C V GS=4.5 V, T C=100 °C Pulsed drain current2) Avalanche current, single pulse 3) Avalanche energy, single pulse Reverse diode d v /dt Gate source voltage 1) Value 40 37 40 30 280 40 40 6 ±20 Unit A I D,pulse I AS E AS dv /dt V GS T C=25 °C T C=25 °C I D=12 A, R GS=25 Ω I D=40 A, V DS=24 V, di /dt =200 A/µs, T j,max=175 °C mJ kV/µs V J-STD20 and JESD22 Rev. 1.0 page 1 2006-10-23 IPD090N03L G IPS090N03L G Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Power dissipation Operating and storage temperature IEC climatic category; DIN IEC 68-1 Symbol Conditions P tot T j, T stg T C=25 °C Value 42 IPF090N03L G IPU090N03L G Unit W °C -55 ... 175 55/175/56 Parameter Symbol Conditions min. Values typ. max. Unit Thermal characteristics Thermal resistance, junction - case SMD version, device on PCB R thJC R thJA minimal footprint 6 cm² cooling area 4) Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage V (BR)DSS V GS=0 V, I D=1 mA V GS(th) V DS=V GS, I D=250 µA V DS=30 V, V GS=0 V, T j=25 °C V DS=30 V, V GS=0 V, T j=125 °C Gate-source leakage current Drain-source on-state resistance 5) - - 3.6 75 50 K/W 30 1 - 2.2 V Zero gate voltage drain current I DSS - 0.1 1 µA - 10 10 10.8 7.5 1.1 55 100 100 13.5 9 Ω S nA mΩ I GSS R DS(on) V GS=20 V, V DS=0 V V GS=4.5 V, I D=30 A V GS=10 V, I D=30 A Gate resistance Transconductance 2) 3) 4) RG g fs |V DS|>2|I D|R DS(on)max, I D=30 A 28 See figure 3 for more detailed information See figure 13 for more detailed information Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. 5) Measured from drain tab to source pin Rev. 1.0 page 2 2006-10-23 IPD090N03L G IPS090N03L G Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics 6) Gate to source charge Gate charge at threshold Gate to drain charge Switching charge Gate charge total Gate plateau voltage Gate charge total Q gs Q g(th) Q gd Q sw Qg V plateau Qg V DD=15 V, I D=30 A, V GS=0 to 10 V V DS=0.1 V, V GS=0 to 4.5 V V DD=15 V, V GS=0 V V DD=15 V, I D=30 A, V GS=0 to 4.5 V 4.0 1.9 1.8 3.9 7.4 3.4 15 C iss C oss Crss t d(on) tr t d(off) tf V DD=15 V, V GS=10 V, I D=30 A, R G=1.6 Ω V GS=0 V, V DS=15 V, f =1 MHz 1200 500 24 4 14 15 3 Values typ. IPF090N03L G IPU090N03L G Unit max. 1600 660 - pF ns - nC V Gate charge total, sync. FET Output charge Reverse Diode Diode continuous forward current Diode pulse current Diode forward voltage Q g(sync) Q oss - 6.4 13 - nC IS I S,pulse V SD T C=25 °C V GS=0 V, I F=30 A, T j=25 °C V R=15 V, I F=I S, di F/dt =400 A/µs - 0.91 37 280 1.1 A V Reverse recovery charge Q rr - - 10 nC 6) See figure 16 for gate charge parameter definition Rev. 1.0 page 3 2006-10-23 IPD090N03L G IPS090N03L G 1 Power dissipation P tot=f(T C) 2 Drain current I D=f(T C); V GS≥10 V IPF090N03L G IPU090N03L G 50 50 40 40 30 30 P tot [W] 20 I D [A] 20 10 10 0 0 50 100 150 200 0 0 50 100 150 200 T C [°C] T C [°C] 3 Safe operating area I D=f(V DS); T C=25 °C; D =0 parameter: t p 103 limited by on-state resistance 2 4 Max. transient thermal impedance Z thJC=f(t p) parameter: D =t p/T 10 1 µs 0.5 10 µs 10 1 100 µs 0.2 0.1 0.05 0.02 I D [A] DC 10 1 1 ms 10 ms Z thJC [K/W] 0.1 0.01 single pulse 100 10-1 10-1 100 101 102 0.01 0 0 0 0 0 0 1 10-6 10-5 10-4 10-3 10-2 10-1 100 V DS [V] t p [s] Rev. 1.0 page 4 2006-10-23 IPD090N03L G IPS090N03L G 5 Typ. output characteristics I D=f(V DS); T j=25 °C parameter: V GS 120 IPF090N03L G IPU090N03L G 6 Typ. drain-source on resistance R DS(on)=f(I D); T j=25 °C parameter: V GS 20 5V 4.5 V 100 16 10 V 3.5 V 4V 80 60 4V R DS(on) [mΩ ] 12 4.5 V I D [A] 5V 8 10 V 11.5 V 40 3.5 V 20 4 3.2 V 3V 2.8 V 0 0 1 2 3 0 0 20 40 60 80 100 V DS [V] I D [A] 7 Typ. transfer characteristics I D=f(V GS); |V DS|>2|I D|R DS(on)max parameter: T j 100 8 Typ. forward transconductance g fs=f(I D); T j=25 °C 100 80 80 60 60 40 g fs [S] 40 20 175 °C 25 °C I D [A] 20 0 0 1 2 3 4 5 0 0 20 40 60 80 100 V GS [V] I D [A] Rev. 1.0 page 5 2006-10-23 IPD090N03L G IPS090N03L G 9 Drain-source on-state resistance R DS(on)=f(T j); I D=30 A; V GS=10 V 10 Typ. gate threshold voltage V GS(th)=f(T j); V GS=V DS; I D=250 µA IPF090N03L G IPU090N03L G 16 2.5 14 2 12 R DS(on) [mΩ ] 10 98 % 8 typ V GS(th) [V] 100 140 180 1.5 6 1 4 0.5 2 0 -60 -20 20 60 0 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances C =f(V DS); V GS=0 V; f =1 MHz 12 Forward characteristics of reverse diode I F=f(V SD) parameter: T j 104 103 25 °C 103 Ciss 175 °C, 98% 10 Coss 2 C [pF] I F [A] 102 175 °C z Crss 101 101 25 °C, 98% 100 0 10 20 30 100 0 0.5 1 1.5 2 V DS [V] V SD [V] Rev. 1.0 page 6 2006-10-23 IPD090N03L G IPS090N03L G 13 Avalanche characteristics I AS=f(t AV); R GS=25 Ω parameter: T j(start) 100 IPF090N03L G IPU090N03L G 14 Typ. gate charge V GS=f(Q gate); I D=30 A pulsed parameter: V DD 12 15 V 6V 10 24 V 8 10 150 °C V GS [V] 103 I AV [A] 100 °C 25 °C 6 4 2 1 10-1 100 101 102 0 0 4 8 12 16 20 t AV [µs] Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=1 mA 16 Gate charge waveforms 34 V GS 32 Qg 30 V BR(DSS) [V] 28 26 V g s(th) 24 22 Q g(th) Q gs -60 -20 20 60 100 140 180 Q sw Q gd Q g ate 20 T j [°C] Rev. 1.0 page 7 2006-10-23 IPD090N03L G IPS090N03L G Package Outline PG-TO252-3-11 IPF090N03L G IPU090N03L G Footprint: Packaging: Rev. 1.0 page 8 2006-10-23 IPD090N03L G IPS090N03L G Package Outline PG-TO252-3-23 IPF090N03L G IPU090N03L G Rev. 1.0 page 9 2006-10-23 IPD090N03L G IPS090N03L G Package Outline PG-TO251-3-11 IPF090N03L G IPU090N03L G Footprint: Packaging: Rev. 1.0 page 10 2006-10-23 IPD090N03L G IPS090N03L G Package Outline PG-TO251-3-11: Outline PG-TO251-3-21 IPF090N03L G IPU090N03L G PG-TO251-3-21: Outline Rev. 1.0 page 11 2006-10-23 IPD090N03L G IPS090N03L G IPF090N03L G IPU090N03L G Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2006. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.0 page 12 2006-10-23