SGP02N60_07

SGP02N60 SGD02N60 Fast IGBT in NPT-technology • 75% lower Eoff compared to previous generation combined with low conduction losses • Short circuit withstand time – 10 µs • Designed for: - Motor controls - Inverter • NPT-Technology for 600V applications offers: - very tight parameter distribution - high ruggedness, temperature stable behaviour PG-TO-252-3-1 (D-PAK) PG-TO-220-3-1 - parallel switching capability (TO-252AA) (TO-220AB) • Pb-free lead plating; RoHS compliant 2 • Qualified according to JEDEC for target applications • Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ Type SGP02N60 SGD02N60 Maximum Ratings Parameter Collector-emitter voltage DC collector current TC = 25°C TC = 100°C Pulsed collector current, tp limited by Tjmax Turn off safe operating area VCE ≤ 600V, Tj ≤ 150°C Gate-emitter voltage Avalanche energy, single pulse IC = 2 A, VCC = 50 V, RGE = 25 Ω , start at Tj = 25°C Short circuit withstand time Power dissipation TC = 25°C Operating junction and storage temperature Soldering temperature, wavesoldering, 1.6mm (0.063 in.) from case for 10s Tj , Tstg Ts -55...+150 260 °C 1) C G E VCE 600V 600V IC 2A 2A VCE(sat)150°C 2.2V 2.2V Tj 150°C 150°C Marking G10N60 G10N60 Package PG-TO-220-3-1 PG-TO-252-3-11 Symbol VCE IC Value 600 6.0 2.9 Unit V A ICpul s VGE EAS 12 12 ±20 13 V mJ tSC Ptot 10 30 µs W VGE = 15V, VCC ≤ 600V, Tj ≤ 150°C 2 1) J-STD-020 and JESD-022 Allowed number of short circuits: 1s. 1 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 Thermal Resistance Parameter Characteristic IGBT thermal resistance, junction – case Thermal resistance, junction – ambient SMD version, device on PCB 1) Symbol RthJC RthJA RthJA Conditions Max. Value 4.2 Unit K/W PG-TO-220-3-1 PG-TO-252-3-1 62 50 Electrical Characteristic, at Tj = 25 °C, unless otherwise specified Parameter Static Characteristic Collector-emitter breakdown voltage Collector-emitter saturation voltage V ( B R ) C E S V G E = 0V , I C = 5 00 µ A VCE(sat) VGE = 15V, IC=2A T j =2 5 ° C T j =1 5 0 ° C Gate-emitter threshold voltage Zero gate voltage collector current VGE(th) ICES I C = 15 0 µ A , V C E = V G E V C E = 60 0 V, V G E = 0 V T j =2 5 ° C T j =1 5 0 ° C Gate-emitter leakage current Transconductance Dynamic Characteristic Input capacitance Output capacitance Reverse transfer capacitance Gate charge Internal emitter inductance measured 5mm (0.197 in.) from case Short circuit collector current 2) Symbol Conditions Value min. 600 1.7 3 Typ. 1.9 2.2 4 1.6 142 18 10 14 7 20 max. 2.4 2.7 5 Unit V µA 20 250 100 170 22 12 18 nC nH A nA S pF IGES gfs Ciss Coss Crss QGate LE IC(SC) V C E = 0V , V G E =2 0 V V C E = 20 V , I C = 2 A V C E = 25 V , V G E = 0V , f = 1 MH z V C C = 48 0 V, I C =2 A V G E = 15 V V G E = 15 V , t S C ≤ 10 µ s V C C ≤ 6 0 0 V, Tj ≤ 150°C - Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm (one layer, 70µm thick) copper area for collector connection. PCB is vertical without blown air. 2) Allowed number of short circuits: 1s. 2 Rev. 2.3 Sep 07 1) 2 SGP02N60 SGD02N60 Switching Characteristic, Inductive Load, at Tj=25 °C Parameter IGBT Characteristic Turn-on delay time Rise time Turn-off delay time Fall time Turn-on energy Turn-off energy Total switching energy td(on) tr td(off) tf Eon Eoff Ets T j =2 5 ° C , V C C = 40 0 V, I C = 2 A, V G E = 0/ 15 V , R G = 11 8 Ω , 1) L σ = 18 0 nH , 1) C σ = 18 0 pF Energy losses include “tail” and diode reverse recovery. 20 13 259 52 0.036 0.028 0.064 24 16 311 62 0.041 0.036 0.078 mJ ns Symbol Conditions Value min. typ. max. Unit Switching Characteristic, Inductive Load, at Tj=150 °C Parameter IGBT Characteristic Turn-on delay time Rise time Turn-off delay time Fall time Turn-on energy Turn-off energy Total switching energy td(on) tr td(off) tf Eon Eoff Ets T j =1 5 0 ° C, V C C = 40 0 V, I C =2 A , V G E = 0/ 15 V , R G = 11 8 Ω , 1) L σ = 18 0 nH , 1) C σ = 18 0 pF Energy losses include “tail” and diode reverse recovery. 20 14 287 67 0.054 0.043 0.097 24 17 344 80 0.062 0.056 0.118 mJ ns Symbol Conditions Value min. typ. max. Unit 1) Leakage inductance L σ a nd Stray capacity C σ due to dynamic test circuit in Figure E. 3 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 16A 14A 12A Ic 10A t p =2 µ s IC, COLLECTOR CURRENT 10A 8A 6A 4A 2A 0A 1 0Hz T C =110°C T C =80°C IC, COLLECTOR CURRENT 15 µ s 1A 50 µ s 200 µ s 0.1A 1ms DC Ic 0 .01A 100Hz 1kHz 10kHz 100kHz 1V 10V 100V 1000V f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj ≤ 150°C, D = 0.5, VCE = 400V, VGE = 0/+15V, RG = 118Ω) VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25°C, Tj ≤ 150°C) 35W 30W 25W 20W 15W 10W 5W 0W 2 5°C 7A 6A 5A 4A 3A 2A 1A 0A 2 5°C IC, COLLECTOR CURRENT Ptot, POWER DISSIPATION 50°C 75°C 100°C 125°C 50°C 75°C 100°C 125°C TC, CASE TEMPERATURE Figure 3. Power dissipation (IGBT) as a function of case temperature (Tj ≤ 150°C) TC, CASE TEMPERATURE Figure 4. Collector current as a function of case temperature (VGE ≤ 15V, Tj ≤ 150°C) 4 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 7A 6A 5A 4A 3A 2A 1A 0A 0V V G E =20V 15V 13V 11V 9V 7V 5V 7A 6A 5A V G E =20V 4A 3A 2A 1A 0A 0V 15V 13V 11V 9V 7V 5V IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 1V 2V 3V 4V 5V 1V 2V 3V 4V 5V VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristics (Tj = 25°C) VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristics (Tj = 150°C) 7A 6A Tj=+25°C -55°C +150°C VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE 8A 4.0V 3.5V IC = 4A IC, COLLECTOR CURRENT 5A 4A 3A 2A 1A 0A 0V 3.0V 2.5V IC = 2A 2.0V 1.5V 2V 4V 6V 8V 10V 1.0V -50°C 0°C 50°C 100°C 150°C VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristics (VCE = 10V) Tj, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V) 5 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 t d(off) t d(off) t, SWITCHING TIMES 100ns t, SWITCHING TIMES tf tf 100ns td(on) tr 10ns 0A 1A 2A 3A 4A 5A t d(on) tr 10ns 0Ω 100 Ω 200 Ω 300 Ω 400 Ω IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, Tj = 150°C, VCE = 400V, VGE = 0/+15V, RG = 1 1 8 Ω, Dynamic test circuit in Figure E) RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, Tj = 150°C, VCE = 400V, VGE = 0/+15V, IC = 2A, Dynamic test circuit in Figure E) VGE(th), GATE-EMITTER THRESHOLD VOLTAGE t d(off) 5.5V 5.0V 4.5V 4.0V 3.5V 3.0V 2.5V 2.0V - 50°C 0°C 50°C 100°C 150°C t, SWITCHING TIMES 100ns tf max. t d(on) tr 10ns 0 °C 50°C 100°C 150°C typ. min. Tj, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/+15V, IC = 2A, RG = 1 1 8 Ω, Dynamic test circuit in Figure E) Tj, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 0.15mA) 6 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 0.2mJ *) Eon and Ets include losses due to diode recovery. *) Eon and Ets include losses due to diode recovery. E, SWITCHING ENERGY LOSSES E ts * E, SWITCHING ENERGY LOSSES 0.2mJ 0.1mJ E ts * 0.1mJ E on * E off E on * E off 0.0mJ 0A 0.0mJ 0Ω 1A 2A 3A 4A 5A 100 Ω 200 Ω 300 Ω 400 Ω IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, Tj = 150°C, VCE = 400V, VGE = 0/+15V, RG = 1 1 8 Ω, Dynamic test circuit in Figure E) RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, Tj = 150°C, VCE = 400V, VGE = 0/+15V, IC = 2A, Dynamic test circuit in Figure E) 0.2mJ *) Eon and Ets include losses due to diode recovery. D =0.5 ZthJC, TRANSIENT THERMAL IMPEDANCE E, SWITCHING ENERGY LOSSES E ts * 10 K/W 0 0.2 0.1 0.05 0.02 R,(K/W) 1.026 1.3 1.69 0.183 R1 0.1mJ E on * 10 K/W 0.01 -1 E off τ, (s) 0.035 3.62*10-3 4.02*10-4 4.21*10-5 R2 10 K/W 1 µs -2 0.0mJ 0 °C single pulse 10µs 100µs C1 =τ1/ R1 C2 =τ 2/ R2 50°C 100°C 150°C 1m s 10m s 100m s 1s Tj, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/+15V, IC = 2A, RG = 1 1 8 Ω, Dynamic test circuit in Figure E) tp, PULSE WIDTH Figure 16. IGBT transient thermal impedance as a function of pulse width (D = tp / T) 7 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 25V 20V VGE, GATE-EMITTER VOLTAGE C iss 100pF 15V 120V 480V 10V C, CAPACITANCE C oss 10pF C rss 5V 0V 0 nC 5nC 10nC 15nC 0V 10V 20V 30V QGE, GATE CHARGE Figure 17. Typical gate charge (IC = 2A) VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE = 0V, f = 1MHz) 25 µ s 40A 20 µ s IC(sc), SHORT CIRCUIT COLLECTOR CURRENT 11V 12V 13V 14V 15V tsc, SHORT CIRCUIT WITHSTAND TIME 30A 15 µ s 20A 10 µ s 10A 5µ s 0µ s 1 0V 0A 1 0V 12V 14V 16V 18V 20V VGE, GATE-EMITTER VOLTAGE Figure 19. Short circuit withstand time as a function of gate-emitter voltage (VCE = 600V, start at Tj = 25°C) VGE, GATE-EMITTER VOLTAGE Figure 20. Typical short circuit collector current as a function of gate-emitter voltage (VCE ≤ 600V,Tj = 150°C) 8 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 PG-TO220-3-1 9 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 PG-TO252-3-11 10 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 τ1 Tj (t) p(t) r1 r2 τ2 τn rn r1 r2 rn TC Figure D. Thermal equivalent circuit Figure A. Definition of switching times Figure B. Definition of switching losses Figure E. Dynamic test circuit Leakage inductance Lσ =180nH a n d Stray capacity C σ =180pF. 11 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 Edition 2006-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 9/12/07. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 12 Rev. 2.3 Sep 07