SP000103249

IPI60R299CP CoolMOSTM Power Transistor Features • Lowest figure-of-merit R ONxQg • Ultra low gate charge • Extreme dv/dt rated • High peak current capability • Qualified according to JEDEC1) for target applications • Pb-free lead plating; RoHS compliant Product Summary V DS @ Tj,max R DS(on),max Q g,typ 650 V 0.299 Ω 22 nC PG-TO262 CoolMOS CP is specially designed for: Hard switching SMPS topologies Type IPI60R299CP Package PG-TO262 Ordering Code SP000103249 Marking 6R299P Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous drain current Symbol Conditions ID T C=25 °C T C=100 °C Pulsed drain current2) Avalanche energy, single pulse Avalanche energy, repetitive t AR2),3) Avalanche current, repetitive t AR2),3) MOSFET dv /dt ruggedness Gate source voltage I D,pulse E AS E AR I AR dv /dt V GS V DS=0...480 V static AC (f >1 Hz) Power dissipation Operating and storage temperature P tot T j, T stg T C=25 °C T C=25 °C I D=4.4 A, V DD=50 V I D=4.4 A, V DD=50 V Value 11 7 34 290 0.44 mJ Unit A 4.4 50 ±20 ±30 96 -55 ... 150 A V/ns V W °C Rev. 2.0 page 1 2006-04-04 IPI60R299CP Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous diode forward current Diode pulse current 2) Reverse diode d v /dt 4) Symbol Conditions IS I S,pulse dv /dt T C=25 °C Value 6.6 34 15 V/ns Unit A Parameter Symbol Conditions min. Values typ. max. Unit Thermal characteristics Thermal resistance, junction - case Thermal resistance, junction ambient Soldering temperature, wavesoldering only allowed at leads R thJC R thJA T sold leaded 1.6 mm (0.063 in.) from case for 10 s 1.3 62 260 °C K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage Gate threshold voltage V (BR)DSS V GS=0 V, I D=250 µA V GS(th) V DS=V GS, I D=0,44 mA V DS=600 V, V GS=0 V, T j=25 °C V DS=600 V, V GS=0 V, T j=150 °C Gate-source leakage current Drain-source on-state resistance I GSS R DS(on) V GS=20 V, V DS=0 V V GS=10 V, I D=6.6 A, T j=25 °C V GS=10 V, I D=6.6 A, T j=150 °C Gate resistance RG f =1 MHz, open drain 600 2.5 3 3.5 V Zero gate voltage drain current I DSS - - 1 µA - 10 0.27 100 0.299 nA Ω - 0.73 1.9 Ω Rev. 2.0 page 2 2006-04-04 IPI60R299CP Parameter Symbol Conditions min. Dynamic characteristics Input capacitance Output capacitance Effective output capacitance, energy related5) Effective output capacitance, time related6) Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics Gate to source charge Gate to drain charge Gate charge total Gate plateau voltage Reverse Diode Diode forward voltage Reverse recovery time Reverse recovery charge Peak reverse recovery current 1) Values typ. max. Unit C iss C oss C o(er) C o(tr) t d(on) tr t d(off) tf V GS=0 V, V DS=100 V, f =1 MHz - 1100 60 46 120 10 5 40 5 - pF V GS=0 V, V DS=0 V to 480 V ns V DD=400 V, V GS=10 V, I D=6,6 A, R G=4,3 Ω - Q gs Q gd Qg V plateau V DD=400 V, I D=6.6 A, V GS=0 to 10 V - 5 7.6 22 5.0 29 - nC V V SD t rr Q rr I rrm V GS=0 V, I F=6.6 A, T j=25 °C - 0.9 300 3.9 26 1.2 - V ns µC A V R=400 V, I F=I S, di F/dt =100 A/µs - J-STD20 and JESD22 Pulse width t p limited by T j,max Repetitive avalanche causes additional power losses that can be calculated as P AV=E AR*f. ISD