SPP17N80C3

Final data SPP17N80C3, SPB17N80C3 SPA17N80C3 VDS RDS(on) ID 800 0.29 17 V Ω A Cool MOS™ Power Transistor Feature • New revolutionary high voltage technology • Worldwide best RDS(on) in TO 220 • Ultra low gate charge • Periodic avalanche rated • Extreme dv/dt rated • Ultra low effective capacitances • Improved transconductance • P-TO-220-3-31: Fully isolated package (2500 VAC; 1 minute) Type SPP17N80C3 SPB17N80C3 SPA17N80C3 Package P-TO220-3-1 P-TO263-3-2 Ordering Code Q67040-S4353 Q67040-S4354 Marking 17N80C3 17N80C3 17N80C3 P-TO220-3-31 1 2 3 P-TO220-3-31 P-TO263-3-2 P-TO220-3-1 P-TO220-3-31 Q67040-S4441 Maximum Ratings Parameter Continuous drain current TC = 25 °C TC = 100 °C Symbol ID 17 11 ID puls EAS EAR IAR VGS VGS Ptot Tj , Tstg 51 670 0.5 17 ±20 ±30 208 Value SPP_B SPA Unit A 17 1) 11 1) 51 670 0.5 17 ±20 ±30 42 W °C A V A mJ Pulsed drain current, tp limited by Tjmax Avalanche energy, single pulse ID=3.4A, VDD=50V Avalanche energy, repetitive tAR limited by Tjmax2) ID=17A, VDD=50V Avalanche current, repetitive tAR limited by Tjmax Gate source voltage Gate source voltage AC (f >1Hz) Power dissipation, TC = 25°C Operating and storage temperature -55...+150 Page 1 2003-07-03 Final data Maximum Ratings Parameter Drain Source voltage slope VDS = 640 V, ID = 17 A, Tj = 125 °C SPP17N80C3, SPB17N80C3 SPA17N80C3 Symbol dv/dt Value 50 Unit V/ns Thermal Characteristics Parameter Thermal resistance, junction - case Thermal resistance, junction - case, FullPAK Thermal resistance, junction - ambient, leaded Thermal resistance, junction - ambient, FullPAK SMD version, device on PCB: @ min. footprint @ 6 cm 2 cooling area 3) Soldering temperature, 1.6 mm (0.063 in.) from case for 10s 4) Electrical Characteristics, at Tj=25°C unless otherwise specified Parameter Symbol Conditions min. Drain-source breakdown voltage V(BR)DSS VGS=0V, ID=0.25mA Drain-Source avalanche breakdown voltage Gate threshold voltage Zero gate voltage drain current VGS(th) I DSS ID=1000µA, VGS=VDS VDS=800V, V GS=0V, Tj=25°C Tj=150°C Symbol min. RthJC RthJC_FP RthJA RthJA_FP RthJA Tsold - Values typ. 35 max. 0.6 3.6 62 80 62 260 Unit K/W °C Values typ. 870 3 0.5 0.25 0.78 0.7 max. 3.9 800 2.1 - Unit V V(BR)DS VGS=0V, ID=17A µA 25 250 100 0.29 nA Ω Gate-source leakage current I GSS VGS=20V, V DS=0V VGS=10V, ID=11A Tj=25°C Tj=150°C Drain-source on-state resistance RDS(on) Gate input resistance RG f=1MHz, open drain Page 2 2003-07-03 Final data Electrical Characteristics Parameter Transconductance Input capacitance Output capacitance Reverse transfer capacitance energy related Effective output capacitance,6) Co(tr) time related Turn-on delay time Rise time Turn-off delay time Fall time Gate Charge Characteristics Gate to source charge Gate to drain charge Gate charge total Gate plateau voltage Qgs Qgd Qg td(on) tr td(off) tf Symbol gfs Ciss Coss Crss VGS=0V, VDS=0V to 480V SPP17N80C3, SPB17N80C3 SPA17N80C3 Conditions min. VDS≥2*ID*R DS(on)max, ID=11A VGS=0V, VDS=25V, f=1MHz Values typ. 15 2320 1250 60 59 124 25 15 72 6 max. 82 9 - Unit S pF Effective output capacitance,5) Co(er) VDD=400V, VGS=0/10V, ID=17A, RG =4.7Ω, Tj =125°C - ns VDD=640V, ID=17A - 12 46 91 6 177 - nC VDD=640V, ID=17A, VGS=0 to 10V V(plateau) VDD=640V, ID=17A V 1Limited only by maximum temperature 2Repetitve avalanche causes additional power losses that can be calculated as P =E *f. AR AV 3Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm² (one layer, 70 µm thick) copper area for drain connection. PCB is vertical without blown air. 4Soldering temperature for TO-263: 220°C, reflow 5C 6C o(er) o(tr) is a fixed capacitance that gives the same stored energy as Coss while VDS is rising from 0 to 80% VDSS. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS. Page 3 2003-07-03 Final data Electrical Characteristics Parameter Inverse diode continuous forward current Inverse diode direct current, pulsed Inverse diode forward voltage Reverse recovery time Reverse recovery charge Peak reverse recovery current Peak rate of fall of reverse recovery current Typical Transient Thermal Characteristics Symbol SPP_B Rth1 Rth2 Rth3 Rth4 Rth5 Rth6 0.00812 0.016 0.031 0.114 0.135 0.059 Tj P tot ( t) C th1 C th2 C th,n SPP17N80C3, SPB17N80C3 SPA17N80C3 Symbol IS I SM VSD t rr Q rr I rrm dirr /dt Conditions min. TC=25°C Values typ. 1 550 15 51 1200 max. 17 51 1.2 - Unit A VGS =0V, IF=IS VR =400V, IF =IS , diF/dt=100A/µs - V ns µC A A/µs Tj=25°C Value SPA 0.00812 0.016 0.031 0.16 0.324 2.522 R th1 Unit K/W Symbol Cth1 Cth2 Cth3 Cth4 Cth5 Cth6 R th,n T case Value SPP_B 0.0003562 0.001337 0.001831 0.005033 0.012 0.092 SPA 0.0003562 0.001337 0.001831 0.005033 0.008657 0.412 Unit Ws/K E xternal H eatsink T am b Page 4 2003-07-03 Final data 1 Power dissipation Ptot = f (TC) 240 SPP17N80C3 SPP17N80C3, SPB17N80C3 SPA17N80C3 2 Power dissipation FullPAK Ptot = f (TC) 45 W 200 180 W 35 Ptot 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 Ptot °C 160 160 30 25 20 15 10 5 0 0 20 40 60 80 100 120 TC °C 160 TC 3 Safe operating area ID = f ( VDS ) parameter : D = 0 , TC=25°C 10 2 4 Safe operating area FullPAK ID = f (VDS) parameter: D = 0, TC = 25°C 10 2 A A 10 1 10 1 ID 10 0 ID tp = 0.001 ms tp = 0.01 ms tp = 0.1 ms tp = 1 ms DC 10 0 10 -1 10 -1 tp = 0.001 ms tp = 0.01 ms tp = 0.1 ms tp = 1 ms tp = 10 ms DC 10 -2 0 10 10 1 10 2 V VDS 10 3 10 -2 0 10 10 1 10 2 10 V VDS 3 Page 5 2003-07-03 Final data 5 Transient thermal impedance ZthJC = f (tp) parameter: D = tp/T 10 1 SPP17N80C3, SPB17N80C3 SPA17N80C3 6 Transient thermal impedance FullPAK ZthJC = f (tp) parameter: D = tp/t 10 1 K/W 10 0 K/W 10 0 ZthJC 10 -1 ZthJC 10 -1 10 -2 10 -3 D = 0.5 D = 0.2 D = 0.1 D = 0.05 D = 0.02 D = 0.01 single pulse 10 -2 10 -3 D = 0.5 D = 0.2 D = 0.1 D = 0.05 D = 0.02 D = 0.01 single pulse 10 -4 -7 10 10 -6 10 -5 10 -4 10 -3 s tp 10 -1 10 -4 -7 -6 -5 -4 -3 -2 -1 10 10 10 10 10 10 10 1 s 10 tp 7 Typ. output characteristic ID = f (VDS); Tj =25°C parameter: tp = 10 µs, VGS A 70 8 Typ. output characteristic ID = f (VDS); Tj =150°C parameter: tp = 10 µs, VGS 35 60 55 50 20V 10V A 20V 10V 8V 7V 6.5V 6V 25 8V 7V ID ID 20 45 40 35 30 25 20 15 10 5 0 0 5 10 15 5.5V 15 6V 5V 10 4.5V 5V 5 4V 20 VDS 30 0 0 5 10 15 20 V VDS 30 V Page 6 2003-07-03 Final data 9 Typ. drain-source on resistance RDS(on)=f(ID) parameter: Tj=150°C, VGS 1.5 SPP17N80C3, SPB17N80C3 SPA17N80C3 10 Drain-source on-state resistance RDS(on) = f (Tj) parameter : ID = 11 A, VGS = 10 V 1.6 SPP17N80C3 Ω 1.3 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 0 4V 4.5V 5V 5.5V 6V 6.5V Ω 1.2 RDS(on) 7V 8V 10V 20V RDS(on) 1 0.8 0.6 0.4 98% typ 0.2 5 10 15 20 25 A ID 35 0 -60 -20 20 60 100 °C 180 Tj 11 Typ. transfer characteristics ID = f ( VGS ); VDS≥ 2 x ID x RDS(on)max parameter: tp = 10 µs 65 12 Typ. gate charge VGS = f (Q Gate) parameter: ID = 17 A pulsed 16 SPP17N80C3 A 55 50 25°C V 12 VGS 45 0,2 VDS max 10 ID 40 35 30 25 20 15 10 5 0 0 2 4 6 8 10 12 14 16 150°C 0,8 VDS max 8 6 4 2 V 20 VGS 0 0 20 40 60 80 100 120 nC 160 QGate Page 7 2003-07-03 Final data 13 Forward characteristics of body diode IF = f (VSD) parameter: Tj , tp = 10 µs 10 2 SPP17N80C3 SPP17N80C3, SPB17N80C3 SPA17N80C3 14 Avalanche SOA IAR = f (tAR) par.: Tj ≤ 150 °C 18 A A 14 10 1 12 10 8 10 0 Tj = 25 °C typ Tj = 150 °C typ Tj = 25 °C (98%) Tj = 150 °C (98%) 10 -1 0 0.4 0.8 1.2 1.6 2 2.4 V 3 2 0 -3 10 -2 T j(START)=125°C IF IAR 6 T j(START)=25°C 4 10 10 -1 10 0 10 1 10 2 VSD µs 10 tAR 4 15 Avalanche energy EAS = f (Tj) par.: ID = 3.4 A, VDD = 50 V mJ 700 16 Drain-source breakdown voltage V(BR)DSS = f (Tj) 980 SPP17N80C3 V 940 600 E AS 500 450 400 350 300 250 200 150 100 50 0 25 50 75 100 V(BR)DSS 550 920 900 880 860 840 820 800 780 760 740 °C Tj 150 720 -60 -20 20 60 100 °C 180 Tj Page 8 2003-07-03 Final data 17 Avalanche power losses PAR = f (f ) parameter: EAR =0.5mJ 500 SPP17N80C3, SPB17N80C3 SPA17N80C3 18 Typ. capacitances C = f (VDS) parameter: VGS =0V, f=1 MHz 10 5 W 400 350 300 250 200 150 100 50 04 10 5 6 pF 10 4 Ciss PAR 10 3 C 10 2 Coss 10 1 Crss 10 Hz f 10 10 0 0 100 200 300 400 500 600 800 V VDS 19 Typ. Coss stored energy Eoss=f(VDS) 18 µJ 14 E oss 12 10 8 6 4 2 0 0 100 200 300 400 500 600 800 V VDS Page 9 2003-07-03 Final data SPP17N80C3, SPB17N80C3 SPA17N80C3 Definition of diodes switching characteristics Page 10 2003-07-03 Final data P-TO-220-3-1 B 10 ±0.4 3.7 ±0.2 A 1.27±0.13 4.44 SPP17N80C3, SPB17N80C3 SPA17N80C3 15.38 ±0.6 2.8 ±0.2 C 5.23 ±0.9 13.5 ±0.5 3x 0.75 ±0.1 1.17 ±0.22 2x 2.54 0.25 M 0.5 ±0.1 2.51±0.2 ABC All metal surfaces tin plated, except area of cut. Metal surface min. x=7.25, y=12.3 P-TO-263-3-2 (D2-PAK) 9.98 ±0.48 0.05 Page 11 2003-07-03 Final data P-TO-220-3-31 (FullPAK) SPP17N80C3, SPB17N80C3 SPA17N80C3 Please refer to mounting instructions (application note AN-TO220-3-31-01) Page 12 2003-07-03 Final data Published by Infineon Technologies AG , Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. SPP17N80C3, SPB17N80C3 SPA17N80C3 Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Page 13 2003-07-03