TLE4266GSV10

5 V/10 V Low Drop Voltage Regulator TLE 4266 Features • • • • • • • • • • • • Output voltage 5 V or 10 V Output voltage tolerance ≤ ±2% 120 mA current capability Very low current consumption Low-drop voltage Overtemperature protection Reverse polarity proof Wide temperature range Suitable for use in automotive electronics Inhibit Green Product (RoHS compliant) AEC Qualified SOT223 Functional Description TLE 4266 is a low-drop voltage regulator for 5 V or 10 V supply in a PG-SOT223-4 SMD package. The IC regulates an input voltage VI in the range of 5.5 V/10.5 V < VI < 45 V to VQ,nom = 5 V/10 V. The maximum output current is more than 120 mA. The IC can be switched off via the inhibit input, which causes the current consumption to drop below 10 µA. The IC is shortcircuit-proof and incorporates a temperature protection which turns off the IC at overtemperature. Choosing External Components The input capacitor CI is necessary for compensating line influences. Using a resistor of approx. 1 Ω in series with CI, the oscillating of input line inductivity and input capacitance can be clamped. The output capacitor CQ is necessary for the stability of the regulating circuit. Stability is guaranteed at values CQ ≥ 10 µF and an ESR ≤ 10 Ω within the whole operating temperature range. Type TLE 4266 G TLE 4266 GSV10 Data Sheet 1 Package PG-SOT223-4 PG-SOT223-4 Rev. 2.5, 2008-03-10 TLE 4266 GND 4 1 2 3 Ι INH Q AEP01734 Figure 1 Table 1 Pin 1 2 3 4 I Pin Configuration (top view) Pin Definitions and Functions Symbol Function Input voltage; block to ground directly at the IC with a ceramic capacitor. Inhibit; low-active input. Output voltage; block to ground with a capacitor CQ ≥ 10 µF. Ground INH Q GND Data Sheet 2 Rev. 2.5, 2008-03-10 TLE 4266 Circuit Description The device includes a precise reference voltage, which is very accurate due to resistor adjustment. A control amplifier compares the divided output voltage to this reference voltage and drives the base of the PNP series transistor through a buffer. Saturation control as a function of the load current prevents any oversaturation of the power element. The IC also incorporates a number of protection circuitry for: • • • Overload Overtemperature Reverse polarity Temperature Sensor 1 Control Amplifier Adjustment Bandgap Reference Saturation Control and Protection Circuit 3 Q Ι Buffer 2 INH 4 GND AEB01725 Figure 2 Block Diagram Data Sheet 3 Rev. 2.5, 2008-03-10 TLE 4266 Table 2 Absolute Maximum Ratings (TLE 4266 G, TLE 4266 GSV10) Tj = -40 to 150 °C Parameter Input Voltage Current Inhibit Voltage Output Voltage Current GND Current Temperature Junction temperature Storage temperature Input voltage Junction temperature Input voltage Junction temperature Thermal Resistance Junction ambient Junction case Symbol Limit Values Min. Max. 45 – 45 32 – – 150 150 45 150 45 150 165 17 V – V V – mA °C °C V °C V °C K/W – internally limited – – internally limited – – – – – – – 1) Unit Notes VI II VINH VQ IQ IGND Tj TS VI Tj VI Tj Rthj-a Rthj-pin -42 – -42 -1 – 50 – -50 5.5 -40 10.5 -40 – – Operating Range (TLE 4266 G) Operating Range (TLE 4266 GSV10) K/W measured to pin 4 1) Package mounted on PCB 80 × 80 × 1.5 mm3; 35µ Cu; 5µ Sn; Footprint only; zero airflow. Data Sheet 4 Rev. 2.5, 2008-03-10 TLE 4266 Table 3 Characteristics (TLE 4266 G) VI = 13.5 V; -40 °C ≤ Tj ≤ 125 °C Parameter Output voltage Output-current limitation Current consumption Iq = Ii - IQ Current consumption Iq = Ii - IQ Current consumption Iq = Ii - IQ Drop voltage Load regulation Line regulation Power supply ripple rejection Inhibit Inhibit on voltage Inhibit off voltage Inhibit current Symbol Limit Values Min. Typ. Max. 4.9 120 – – – – – – – 5 150 – – 10 5.1 – 10 400 15 Unit Test Condition V mA µA µA mA V mV mV dB 5 mA ≤ IQ ≤ 100 mA 6 V ≤ Vi ≤ 28 V – VQ IQ Iq Iq Iq VDR ∆VQ,lo ∆VQ,li VINH = 0 V; Tj ≤ 100 °C IQ = 1 mA Inhibit ON IQ = 100 mA Inhibit ON 0.25 0.5 – 15 54 40 30 – PSRR IQ = 100 mA1) IQ = 5 to 100 mA Vi = 6 V VI = 6 V to 28 V IQ = 5 mA fr = 100 Hz, Vr = 0.5 Vpp – – VINH, on VINH, off IINH 3.5 – 5 – – 15 – 0.8 25 V V µA VINH = 5 V 1) Drop voltage = Vi - VQ (measured when the output voltage VQ has dropped 100 mV from the nominal value obtained at Vi = 13.5 V). Data Sheet 5 Rev. 2.5, 2008-03-10 TLE 4266 Table 4 Characteristics (TLE 4266 GSV10) VI = 13.5 V; -40 °C ≤ Tj ≤ 125 °C Parameter Output voltage Output voltage Output-current limitation Current consumption Iq = II - IQ Current consumption Iq = II - IQ Current consumption Symbol Limit Values Min. Typ. Max. 9.8 9.8 120 – – – – -80 -30 – 10 10 150 – 350 7 Unit Test Condition 5 mA ≤ IQ ≤ 100 mA 11 V ≤ VI ≤ 21 V 1 mA ≤ IQ ≤ 50 mA 11 V ≤ VI ≤ 28 V – VQ VQ IQ Iq,off Iq Iq VDR ∆VQ,Lo ∆VQ,Li 10.2 V 10.2 V 200 10 500 15 mA µA µA mA V mV mV dB VINH = 0 V; Tj ≤ 100 °C IQ < 1 mA Inhibit ON IQ < 100 mA Inhibit ON Iq = II - IQ Drop voltage Load regulation Line regulation Power supply ripple rejection Inhibit Inhibit on voltage Inhibit off voltage Inhibit current 0.28 0.5 – 5 54 80 30 – PSRR IQ = 100 mA1) IQ = 5 to 100 mA VI = 11 V VI = 11 V to 28 V IQ = 5 mA fr = 100 Hz, Vr = 0.5 Vpp – – VINH, on VINH, off IINH 3.5 – 5 – – 12 – 0.8 25 V V µA VINH = 5 V 1) Drop voltage = VI - VQ measured when the output voltage VQ has dropped 100 mV from the nominal value. Data Sheet 6 Rev. 2.5, 2008-03-10 TLE 4266 Input 5.5 V/10.5 V to 45 V Ι Q Output ΙΙ 470 µF VΙ VINH Ιe 100 nF ΙQ 22 µF TLE 4266G INH GND VQ AES01726 Figure 3 Measuring Circuit (TLE 4266 G, TLE 4266 GSV10) Input 5.5 V/10.5 V to 45 V Ι Q Output CQ 22 µF CΙ e.g. Kl. 15 TLE 4266G INH GND AES01727 Figure 4 Data Sheet Application Circuit (TLE 4266 G, TLE 4266 GSV10) 7 Rev. 2.5, 2008-03-10 TLE 4266 Drop Voltage VDR versus Output Current IQ (5 V, 10 V) 800 V DR mV 700 600 500 Tj = 125 C AED01978 Current Consumption Iq versus Output Current IQ (5 V) 12 AED01980 Ι q mA 10 8 Vi = 13.5 V 6 400 300 4 200 Tj = 25 C 100 0 25 2 50 75 100 125 mA 175 0 0 50 100 mA 150 ΙQ ΙQ Current Consumption Iq versus Output Current IQ (5 V version) 3.0 AED01981 Current Consumption Iq versus Output Current IQ (10 V version) 3.0 AED01981 Ι q mA 2.5 Ι q mA 2.5 2.0 2.0 1.5 1.5 1.0 Vi = 13.5 V 0.5 1.0 Vi = 13.5 V 0.5 0 0 5 10 15 20 30 mA ΙQ 0 0 5 10 15 20 30 mA ΙQ Data Sheet 8 Rev. 2.5, 2008-03-10 TLE 4266 Current Consumption Iq versus Input Voltage VI (5 V version) 15 AED03013 Current Consumption Iq versus Input Voltage VI (10 V version) 15 AED02733 Ι q mA Ι q mA R L = 50 Ω 10 10 R L = 100 Ω 5 R L = 100 Ω 5 R L = 200 Ω 0 0 10 20 30 40 V 50 VΙ 0 0 10 20 30 40 V 50 VΙ Output Voltage VQ versus Temperature Tj (5 V version) 5.20 VQ V 5.10 Vi = 13.5 V 5.00 AED03014 Output Voltage VQ versus Temperature Tj (10 V version) 10.40 VQ V AED02735 10.20 Vi = 13.5 V 10.00 4.90 9.80 4.80 9.60 4.70 9.40 4.60 -40 0 40 80 120 C 160 Tj 9.20 -40 0 40 80 120 C 160 Tj Data Sheet 9 Rev. 2.5, 2008-03-10 TLE 4266 Output Voltage VQ versus Input Voltage VI (5 V version) 6 VQ V 5 AED01984 Output Voltage VQ versus Input Voltage VI (10 V version) VQ 12 V 10 AED02736 R L = 50 Ω R L = 50 Ω 4 8 3 6 2 4 1 2 0 0 2 4 6 8 V 10 VΙ 0 0 4 8 12 16 V 20 VΙ Output Voltage VQ versus Inhibit Voltage VINH (5 V version) 6 VQ V 5 V Ι = 13.5 V 4 V Ι = VINH 3 AED02014 Output Voltage VQ versus Inhibit Voltage VINH (10 V version) 12 VQ V 10 V Ι = 13.5 V 8 V Ι = VINH 6 AED02734 2 4 1 2 0 0 1 2 3 4 5V6 VINH 0 0 2 4 6 8 10 V 12 VINH Data Sheet 10 Rev. 2.5, 2008-03-10 TLE 4266 Output Current IQ versus Input Voltage VI (5 V-version) 200 AED03015 Output Current IQ versus Input Voltage VI (10 V version) 200 AED02751 Ι Q mA Ι Q mA 150 Tj = 25 C 150 Tj = 25 C 100 Tj = 125 C 100 Tj = 125 C 50 50 0 0 10 20 30 40 V 50 VΙ 0 0 10 20 30 40 V 50 VΙ Data Sheet 11 Rev. 2.5, 2008-03-10 TLE 4266 Package Outlines A 6.5 ±0.2 3 ±0.1 0.1 max 1.6 ±0.1 B 7 ±0.3 15˚max 4 1 0.7 ±0.1 2 3 2.3 4.6 0.5 min 0.28 ±0.04 0.25 M A 0.25 M B 3.5 ±0.2 +0.2 acc. to DIN 6784 GPS05560 Figure 5 PG-SOT223-4 (Plastic Small Outline Transistor) Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). You can find all of our packages, sorts of packing and others in our Infineon Internet Page “Products”: http://www.infineon.com/products. SMD = Surface Mounted Device Data Sheet 12 Dimensions in mm Rev. 2.5, 2008-03-10 TLE 4266 Revision History Version Rev. 2.5 Rev. 2.4 Date Changes 2008-03-10 Simplified package name to PG-SOT223-4. No modification of released product. 2007-03-20 Initial version of RoHS-compliant derivate of TLE 4266 Page 1: AEC certified statement added Page 1 and Page 12: RoHS compliance statement and Green product feature added Page 1 and Page 12: Package changed to RoHS compliant version Legal Disclaimer updated Data Sheet 13 Rev. 2.5, 2008-03-10 Edition 2008-03-10 Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.