TLE4285G_08

5-V Voltage Regulator TLE 4285 G Features • • • • • • • • • • 15 mA current capability Low quiescent current consumption Power fail output Wide operation range: up to 45 V Wide temperature range: -40 °C to 150 °C Output protected against short circuit Overtemperature protection Very small SMD-Package PG-SCT-595-5 Green product (RohS compliant) AEC qualified PG-SCT-595-5 Functional Description The TLE 4285 G is a 5-V fixed voltage regulator in a very small SMD package PG-SCT-595-5. The maximum input voltage is 45 V. The output is able to drive an output current of more than 10 mA while it regulates the output voltage within a 4% accuracy. The Power Fail Output (open collector) is switched to low in case of under-voltage at the output pin. To reduce external components the Power Fail Output has an internal pull-up resistor of 50 kΩ which is connected to the output Q. The device incorporates a temperature protection that disables the circuit at overtemperature. Type TLE 4285 G Data Sheet Package PG-SCT-595-5 1 Marking B1 Rev. 2.2, 2008-04-21 TLE 4285 G PG-SCT-595-5 PF 1 5 GND GND 2 Ι 3 4 Q AEP02279 Figure 1 Table 1 Pin No. 1 2 3 4 5 Pin Configuration (top view) Pin Definitions and Functions Symbol PF GND I Q GND Function Power Fail; L for under-voltage; internally connected to Q via 50 kΩ pull-up resistor Ground; internally connected to pin 5 Input voltage Output voltage; must be blocked by a capacitor CQ ≥ 1 µF, ESR ≤ 10 Ω to GND Ground; internally connected to pin 2 Data Sheet 2 Rev. 2.2, 2008-04-21 TLE 4285 G Functional Block Diagram Protection Ι 3 4 Q Reference Regulator Power Fail Control 1 PF 2, 5 GND AEB02186 Figure 2 Block Diagram Data Sheet 3 Rev. 2.2, 2008-04-21 TLE 4285 G Table 2 Absolute Maximum Ratings -40 °C < Tj < 150 °C Parameter Input Voltage Current Output Voltage Current Power Fail Voltage Current Temperatures Junction temperature Storage temperature Thermal Resistances Junction pin Junction ambient Symbol Limit Values Min. Max. 45 * 16 * 45 * 150 150 30 55 V mA V mA V µA °C °C K/W K/W – * internally limited – * internally limited – * internally limited – – measured to pin 5 1) Unit Remarks VI II VQ IQ VPF IPF Tj Tstg Rthj-pin Rthj-a -0.3 -20 -0.3 -20 -0.3 -500 -40 -50 – – 1) Package mounted on PCB 40 × 40 × 1.5 mm3/6 cm2 Cu. Note: Maximum ratings are absolute ratings; exceeding any one of these values may cause irreversible damage to the integrated circuit. Table 3 Parameter Input voltage Output current Junction temperature Operating Range Symbol Limit Values Min. Max. 42 – 150 V mA °C – – – 6 15 -40 Unit Remarks VI IQ Tj Data Sheet 4 Rev. 2.2, 2008-04-21 TLE 4285 G Table 4 Electrical Characteristics 6.2 V < VI < 36 V; -40 °C < Tj < 150 °C; unless otherwise specified Parameter Output Output voltage Output voltage Drop voltage Output capacitor Output current Current Consumption Quiescent current Symbol Min. Limit Values Typ. 5.0 5.0 0.8 – – 100 Max. 5.15 5.20 1.1 – 70 150 V V V µF mA µA Unit Test Condition VQ VQ Vdr CQ IQ Iq 4.85 4.8 0.6 1 15 – Tj = 25 °C; 1 mA < IQ < 10 mA 1 mA < IQ < 10 mA IQ = 10 mA1) ESR ≤ 10 Ω at 10 kHz – IQ < 10 mA; VI = 13.5 V 0 mA < IQ