TLE4295GV33

Low Drop Voltage Regulator TLE 4295 Features • • • • • • • • • • • • • • Four versions: 2.6 V, 3.0 V, 3.3 V, 5.0 V Output voltage tolerance ≤ ±4% Very low drop voltage Output current: 30 mA Power fail output Low quiescent current consumption Wide operation range: up to 45 V Wide temperature range: -40 °C ≤ Tj ≤ 150 °C Output protected against short circuit Overtemperature protection Reverse polarity proof Very small SMD-Package PG-SCT595-5 Green Product (RoHS compliant) AEC Qualified PG-SCT595-5 Functional Description The TLE 4295 G is a monolithic integrated low-drop voltage regulator in the very small SMD package PG-SCT595-5. It is designed to supply e.g. microprocessor systems under the severe conditions of automotive applications. Therefore the device is equipped with additional protection functions against overload, short circuit and reverse polarity. At overtemperature the regulator is automatically turned off by the integrated thermal protection circuit. Input voltages up to 40 V are regulated to VQ,nom = 2.6 V (V26 version) 3.0 V (V30 version) 3.3 V (V33 version) or 5.0 V (V50 version). The output is able to drive a load of more than 30 mA while it regulates the output voltage within a 4% accuracy. The power fail output (open collector) is switched to low in case of undervoltage overload or saturation of the output transistor. Type TLE 4295 GV26 TLE 4295 GV30 TLE 4295 GV33 TLE 4295 GV50 Data Sheet Package PG-SCT595-5 PG-SCT595-5 PG-SCT595-5 PG-SCT595-5 1 Marking D4 D3 D2 D1 Rev. 1.4, 2008-04-21 TLE 4295 PF GND Ι 1 5 2 3 4 AEP02661 GND Q Figure 1 Table 1 Pin No. 1 2 3 4 Pin Configuration (top view) Pin Definitions and Functions Symbol PF GND I Q Function Power Fail; L for under-voltage Ground; connected to pin 5 Input voltage Output voltage; must be blocked by a capacitor CQ ≥ 2.2 µF, ESR ≤ 5 Ω to GND (Tantalum capacitor recommended as output capacitor) Ground; connected to pin 2 5 GND Data Sheet 2 Rev. 1.4, 2008-04-21 TLE 4295 Temperature Control Saturation Control and Protection Circuit 4 Q Ι3 Band-Gap Referenz _ + 1 PF 2, 5 GND AEB02662 Figure 2 Block Diagram Data Sheet 3 Rev. 1.4, 2008-04-21 TLE 4295 Table 2 Absolute Maximum Ratings -40 °C < Tj < 150 °C Parameter Input Voltage Current Output Voltage Current Power Fail Voltage Current Temperatures Junction temperature Storage temperature Thermal Resistances Junction pin Junction ambient1) Symbol Limit Values Min. Max. 45 – 30 – 45 * 150 150 30 179 V mA V mA V µA °C °C K/W K/W – internally limited – internally limited – * internally limited – – measured to pin 5 zero airflow zero heat sink area Unit Remarks VI II VQ IQ VPF IPF Tj Tstg Rthj-pin Rthja -42 – -6 – -0.3 -500 -40 -50 – – 1) Worst case regarding peak temperature. Note: Maximum ratings are absolute ratings; exceeding any one of these values may cause irreversible damage to the integrated circuit. Table 3 Parameter Input voltage Input voltage Output current Junction temperature Data Sheet Operating Range Symbol Limit Values Min. Max. V V mA °C – 2.6 V version internally limited – Rev. 1.4, 2008-04-21 Unit Remarks VI VI IQ Tj VQ,nom + 45 0.5 V 3.5 V – -40 4 45 – 150 TLE 4295 Table 4 Electrical Characteristics VI = 13.5 V; -40 °C < Tj < 150 °C; unless otherwise specified Parameter Output Output voltage V26 version Output voltage V26 version Output voltage V30 version Output voltage V30 version Output voltage V33 version Output voltage V33 version Output voltage V50 version Output voltage V50 version Output current limitation Drop voltage Output capacitor Current Consumption Current consumption Iq = II - IQ Current consumption Iq = II - IQ Symbol Limit Values Min. Typ. 2.60 2.60 3.0 3.0 3.30 3.30 5.00 5.00 – 0.25 – Max. 2.70 2.70 3.12 3.12 3.43 3.43 5.20 5.20 – 0.40 – V V V V V V V V mA V µF 1 mA < IQ < 30 mA VI = 13.5 V Unit Test Condition VQ VQ VQ VQ VQ VQ VQ VQ IQ Vdr CQ 2.50 2.50 2.88 2.88 3.17 3.17 4.80 4.80 30 – 2.2 IQ = 10 mA 3.5 V < VI < 40 V 1 mA < IQ < 30 mA VI = 13.5 V IQ = 10 mA 4 V < VI < 40 V 1 mA < IQ < 30 mA VI = 13.5 V IQ = 10 mA 4.3 V < VI < 40 V 1 mA < IQ < 30 mA VI = 13.5 V IQ = 10 mA 6 V < VI < 40 V 1) IQ = 20 mA1) ESR ≤ 5 Ω at 10 kHz Iq Iq – – 2 120 4 200 mA µA IQ < 30 mA IQ < 1 m A Data Sheet 5 Rev. 1.4, 2008-04-21 TLE 4295 Table 4 Electrical Characteristics (cont’d) VI = 13.5 V; -40 °C < Tj < 150 °C; unless otherwise specified Parameter Regulator Performance Load regulation Load regulation Line regulation |∆VQ| |∆VQ| |∆VQ| – – – 10 10 5 25 30 25 mV mV mV 1 mA < IQ < 25 mA; Tj = 25 °C 1 mA < IQ < 25 mA ∆VI = VI, min to 36 V; IQ = 5 mA; Tj = 25 °C ∆VI = VI, min to 36 V; IQ = 5 m A Symbol Limit Values Min. Typ. Max. Unit Test Condition Line regulation Power Supply Ripple Rejection Power Fail Output Power fail threshold |∆VQ| – – 10 60 30 – mV dB PSRR fr = 100 Hz; Vr = 0.5 Vpp TLE 4295 GV50 TLE 4295 GV33 TLE 4295 GV30 TLE 4295 GV26 TLE 4295 GV50 TLE 4295 GV33 TLE 4295 GV30 TLE 4295 GV26 VQPF – – – – 4.86 3.20 2.91 2.52 140 100 90 80 150 100 – – – – 300 200 180 160 300 130 V V V V mV mV mV mV mV kΩ Power Fail Headroom VQnom VQPF 50 33 30 27 Power fail low voltage Pull-up resistor VPFL RPF – 70 IPF = 0.1 mA internal connected to VQ 1) Measured when the output voltage VQ has dropped 100 mV from the nominal value. Data Sheet 6 Rev. 1.4, 2008-04-21 TLE 4295 V I, min to 45 V Ι 3 4 Q 2.6 V/3.0 V/3.3 V/5.0 V CΙ 100 nF TLE 4295 G PF CQ 2.2 µF 1 Power Fail 2, 5 GND AES02663 Figure 3 Application Circuit Data Sheet 7 Rev. 1.4, 2008-04-21 TLE 4295 Package Outlines 2.9 ±0.2 (2.2) (1.45) 1.2 +0.1 -0.05 B (0.3) (0.4) 1) 1.1 MAX. 0.1 MAX. 2.5 ±0.1 0.25 ±0.1 10˚ MAX. (0.23) 1) 1 2 3 0.3 +0.1 -0.05 +0.1 0.6 -0.05 10˚ MAX. 0.15 +0.1 -0.06 0.2 M A 0.95 1.9 0.25 M B A 1) Contour of slot depends on profile of gull-wing lead form GPW05997 Figure 4 Outline PG-SCT595-5 Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). You can find all of our packages, sorts of packing and others in our Infineon Internet Page “Products”: http://www.infineon.com/packages. SMD = Surface Mounted Device Data Sheet 8 Dimensions in mm Rev. 1.4, 2008-04-21 1.6 ±0.1 5 4 (0.13) TLE 4295 Revision History Version Rev. 1.4 Date Changes 2008-04-21 Initial version of RoHS-compliant derivate of TLE 4295. Page 1: AEC certified statement added. Page 1 and Page 8: RoHS compliance statement and Green product feature added. Page 1 and Page 8: Package changed to RoHS compliant version. Page 1: Marking information added. Legal Disclaimer updated 2004-01-01 Final datasheet Rev. 1.3 Data Sheet 9 Rev. 1.4, 2008-04-21 Edition 2008-04-21 Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.