VDSL5100I

PRODUCT BRIEF Using 0.13 µ technology, Infineon's softwareconfigurable VDSL5100i delivers a series of industry breakthroughs for QAM VDSL DSLAM linecards and CPEs. The VDSL5100i MoC (Modem-on-Chip) incorporates the digital transceiver, the analog front end, and the line driver, into a single 14mm x 14mm package. Advanced Adaptive Hybrid technology eliminates the need for band planspecific linecards so a single design can be used in multi-regional DSLAM/Switches. All together, the VDSL5100i delivers smaller footprints and lower BOMs, significantly reducing overall VDSL system costs. With Infineon’s VDSL5100i, system vendors can shorten their design cycles for a wide variety of Ethernet over VDSL and MDU/MTU networking applications. Applications ■ Customer Premises Equipment (CPE) ■ DSLAM linecards ■ Multiple Dwelling/Tenant Units (MDU / MTU) networking ■ Ethernet-over-VDSL for first/last mile access solutions ■ Fiber and broadband wireless extensions ■ LAN extensions up to 1,200 meters (4,000 ft.) ■ Upgrades of HDSL, SDSL and ADSL systems Features ■ Extremely small 14mm x 14mm footprint ■ Low power consumption ■ Versatile and completely flexible 2, 3, or 4-band operation ■ LR-VDSL mode for extended VDSL range ■ Adaptive Hybrid technology allows highly compact DSLAM designs ■ ■ ■ ■ ■ ■ ■ T1E1.4, ETSI, CTSI and ITU-T compliant high speed VDSL PHY applications Supports draft IETF MIBs for VDSL Frequency Division Multiplexing (FDM) Dual latency support with built-in interleaver memory Implements Power Back Off Embedded crystal oscillator (DCXO) for timing recovery Spectral allocation allows noise-free operation with xDSL, ISDN, TCM-ISDN and digital PBX V DSL5100i Interfaces MII/SMII/SS-SMII/RMII compliant with the 802.3 Ethernet specification ■ MII serial management interface to access all internal registers ■ External parallel host port ■ Serial UART interface to a standard serial terminal ■ EEPROM interface via IIC ■ IEEE 1149.1 JTAG test port ■ Performance ■ Asymmetric DS/US data rates of 70/40 Mbit/s and symmetric data rates up to 50 Mbit/s ■ LR-VDSL data rates of 4 Mbit/s DS and 0.6 Mbit/s US up to 4 km (13,200 ft.) Power Consumption ■ Typical power consumption is 0.95 W ■ Maximum power consumption is 1.1 W VDSL5100i Integrated Single-port VDSL Modem-on-Chip PEF 22817 Never stop thinking. PRODUCT BRIEF VDSL5100i Block Diagram TPS-TC a nd N e twork Inte rfa c e PMS-TC RS En co d e r VD SL Fra me r PMD QAM Tx Mo d u la to r L in e D rive r Tx Scra mb le r MII Tx a n d R x Bu ffe rs PTM-TC (H D L C ) U n scra mb le r In te rle a ve r SR AM D AC RS D e co d e r DeIn te rle a ve r VD SL D e fra me r QAM R x D e -Mo d u la to r Ti min g R e cov ery D AC 1 3 Bits Po stfitte r POC O Tu n in g AGC Co n tro ll er IC Pe riphe ra l C ontrol 1 6 -KB R OM 2 4 -KB R AM C o n fig u ra tio n a n d C o n tro l R e g iste rs AD C AD C 1 2 Bits Pre filte r AC E AGC Rx A na log Fr ont End C o n tro lle r In te rfa ce AFE C o n tro lle r Wa ke u p C ircu itry D C XO In te rn a l Micro co n tro lle r Se ria l In te rfa ce U AR T Se ria l In te rfa ce IIC (EEPR OM) Pa ra lle l Po rt MD IO C lo ck a n d R e se t Blo ck D ig ita l a n d An a lo g AFE C o n tro l In te rfa ce Ordering Information VDSL5100i IC Product VDSL5100i Sales Code PEF 22817 Description Integrated Modem-on-Chip for Ethernet-over-VDSL applications Package PG-LFBGA-225-1 VDSL5100i Design Tools Product Sales Code Description VDSL5100i-E Evaluation/Demo Kit for Ethernet over VDSL or LR-VDSL applications. Evaluation/Demo Kit for Ethernet over VDSL using Adaptive Hybrid technology. Package VDSL5100i-E CO and CPE, filters, standard VDSL mode kit, complete software package and documentation. VDSL5100i-E (AH) CO and VDSL5100i-E CPE, filters, complete software package and documentation. VDSL5100i-E (AH) 10/100BaseT Ethernet Ethernet PHY Tx PEF 22817 VDSL5100i Rx EthernetPOTS/ISDN over-VDSL Spliter and Magnetics Ethernet over VDSL CPE Application Example Note: The VDSL500i appears in actual size. How to reach us: http://www.infineon.com Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München © Infineon Technologies AG 2003. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B115-H8210-G2-X-7600 Printed in Germany PS 08031. NB Template: pb_tmplt.fm/3/2003-07-01 yb)_rev4 Published by Infineon Technologies AG C rys ta l