0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
347

347

  • 厂商:

    INTEL

  • 封装:

  • 描述:

    347 - Celeron D Processor - Intel Corporation

  • 数据手册
  • 价格&库存
347 数据手册
Intel® Celeron® D Processor 300Δ Sequence Datasheet – On 65 nm Process in the 775-Land Package March 2007 Document Number: 311826-005 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. INTEL PRODUCTS ARE NOT INTENDED FOR USE IN MEDICAL, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The Intel® Celeron® D processor 300 sequence on 65 nm process may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Δ Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different processor families. Over time processor numbers will increment based on changes in clock speed, cache, FSB, or other features, and increments are not intended to represent proportional or quantitative increases in any particular feature. Current roadmap processor number progression is not necessarily representative of future roadmaps. See http://www.intel.com/products/processor_number for details. Intel® 64 requires a computer system with a processor, chipset, BIOS, operating system, device drivers, and applications enabled for Intel 64. Processor will not operate (including 32-bit operation) without an Intel 64-enabled BIOS. Performance will vary depending on your hardware and software configurations. See http://www.intel.com/technology/intel64/index.htm for more information including details on which processors support Intel 64, or consult with your system vendor for more information. Enabling Execute Disable Bit functionality requires a PC with a processor with Execute Disable Bit capability and a supporting operating system. Check with your PC manufacturer on whether your system delivers Execute Disable Bit functionality. Intel, Pentium, Celeron, and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. Copyright © 2006–2007 Intel Corporation. 2 Datasheet Contents 1 Introduction................................................................................................................. 9 1.1 Terminology ....................................................................................................... 9 1.1.1 Processor Packaging Terminology ............................................................. 10 1.2 References ....................................................................................................... 11 Electrical Specifications ............................................................................................... 13 2.1 Power and Ground Lands.................................................................................... 13 2.2 Decoupling Guidelines ........................................................................................ 13 2.2.1 VCC Decoupling ..................................................................................... 13 2.2.2 VTT Decoupling ...................................................................................... 14 2.2.3 FSB Decoupling...................................................................................... 14 2.3 Voltage Identification ......................................................................................... 14 2.4 Reserved, Unused, and TESTHI Signals ................................................................ 16 2.5 Voltage and Current Specification ........................................................................ 17 2.5.1 Absolute Maximum and Minimum Ratings .................................................. 17 2.5.2 DC Voltage and Current Specification ........................................................ 18 2.5.3 VCC Overshoot ...................................................................................... 21 2.5.4 Die Voltage Validation ............................................................................. 22 2.6 Signaling Specifications...................................................................................... 22 2.6.1 FSB Signal Groups.................................................................................. 23 2.6.2 GTL+ Asynchronous Signals..................................................................... 25 2.6.3 Processor DC Specifications ..................................................................... 25 2.6.3.1 GTL+ Front Side Bus Specifications ............................................. 28 2.7 Clock Specifications ........................................................................................... 29 2.7.1 Front Side Bus Clock (BCLK[1:0]) and Processor Clocking ............................ 29 2.7.2 FSB Frequency Select Signals (BSEL[2:0])................................................. 30 2.7.3 Phase Lock Loop (PLL) and Filter .............................................................. 30 2.7.4 BCLK[1:0] Specifications ......................................................................... 32 Package Mechanical Specifications ................................................................................ 33 3.1 Package Mechanical Drawing............................................................................... 33 3.2 Processor Component Keep-Out Zones ................................................................. 37 3.3 Package Loading Specifications ........................................................................... 37 3.4 Package Handling Guidelines............................................................................... 37 3.5 Package Insertion Specifications.......................................................................... 38 3.6 Processor Mass Specification ............................................................................... 38 3.7 Processor Materials............................................................................................ 38 3.8 Processor Markings............................................................................................ 38 3.9 Processor Land Coordinates ................................................................................ 39 Land Listing and Signal Descriptions ............................................................................. 41 4.1 Processor Land Assignments ............................................................................... 41 4.2 Alphabetical Signals Reference ............................................................................ 64 Thermal Specifications and Design Considerations........................................................... 75 5.1 Processor Thermal Specifications ......................................................................... 75 5.1.1 Thermal Specifications ............................................................................ 75 5.1.2 Thermal Metrology ................................................................................. 79 5.2 Processor Thermal Features ................................................................................ 79 5.2.1 Thermal Monitor..................................................................................... 79 5.2.2 On-Demand Mode .................................................................................. 80 5.2.3 PROCHOT# Signal .................................................................................. 81 5.2.4 THERMTRIP# Signal ............................................................................... 81 2 3 4 5 Datasheet 3 5.2.5 5.2.6 6 TCONTROL and Fan Speed Reduction ...........................................................81 Thermal Diode........................................................................................81 Features ....................................................................................................................85 6.1 Power-On Configuration Options ..........................................................................85 6.2 Clock Control and Low Power States .....................................................................85 6.2.1 Normal State .........................................................................................86 6.2.2 HALT and Enhanced HALT Powerdown States..............................................86 6.2.2.1 HALT Powerdown State ..............................................................87 6.2.2.2 Enhanced HALT Powerdown State................................................87 6.2.3 Stop Grant State ....................................................................................87 6.2.4 Enhanced HALT Snoop or HALT Snoop State, Stop Grant Snoop State...........................................................................88 6.2.4.1 HALT Snoop State, Stop Grant Snoop State ..................................88 6.2.4.2 Enhanced HALT Snoop State .......................................................88 Boxed Processor Specifications .....................................................................................89 7.1 Mechanical Specifications ....................................................................................89 7.1.1 Boxed Processor Cooling Solution Dimensions.............................................89 7.1.2 Boxed Processor Fan Heatsink Weight .......................................................91 7.1.3 Boxed Processor Retention Mechanism and Heatsink Attach Clip Assembly...............................................................................91 7.2 Electrical Requirements ......................................................................................91 7.2.1 Fan Heatsink Power Supply ......................................................................91 7.3 Thermal Specifications........................................................................................93 7.3.1 Boxed Processor Cooling Requirements......................................................93 Debug Tools Specifications ...........................................................................................95 8.1 Logic Analyzer Interface (LAI) .............................................................................95 8.1.1 Mechanical Considerations .......................................................................95 8.1.2 Electrical Considerations ..........................................................................95 7 8 4 Datasheet Figures 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 VCC Static and Transient Tolerance for 775_VR_CONFIG_05A and 775_VR_CONFIG_06 Processors .............................................................................................................. 21 VCC Overshoot Example Waveform ............................................................................. 22 Phase Lock Loop (PLL) Filter Requirements .................................................................. 31 Processor Package Assembly Sketch ........................................................................... 33 Processor Package Drawing (Sheet 1 of 3)................................................................... 34 Processor Package Drawing (Sheet 2 of 3)................................................................... 35 Processor Package Drawing (Sheet 3 of 3)................................................................... 36 Processor Top-Side Marking Example .......................................................................... 38 Processor Land Coordinates and Quadrants (Top View) ................................................. 39 land-out Diagram (Top View – Left Side) ..................................................................... 42 land-out Diagram (Top View – Right Side) ................................................................... 43 Thermal Profile for 775_VR_CONFIG_05A Processors .................................................... 77 Thermal Profile for 775_VR_CONFIG_06 Processors ...................................................... 78 Case Temperature (TC) Measurement Location ............................................................ 79 Processor Low Power State Machine ........................................................................... 86 Mechanical Representation of the Boxed Processor ....................................................... 89 Space Requirements for the Boxed Processor (Side View: applies to all four side views) .... 90 Space Requirements for the Boxed Processor (Top View)............................................... 90 Space Requirements for the Boxed Processor (Overall View) ......................................... 91 Boxed Processor Fan Heatsink Power Cable Connector Description .................................. 92 Baseboard Power Header Placement Relative to Processor Socket ................................... 93 Boxed Processor Fan Heatsink Airspace Keep-out Requirements (Side 1 View) .......................................................................................................... 94 Boxed Processor Fan Heatsink Airspace Keep-out Requirements (Side 2 View) .......................................................................................................... 94 Datasheet 5 Tables 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 References ..............................................................................................................11 Voltage Identification Definition ..................................................................................15 Absolute Maximum and Minimum Ratings ....................................................................17 Voltage and Current Specifications..............................................................................18 VCC Static and Transient Tolerance for 775_VR_CONFIG_05A and 775_VR_CONFIG_06 Processors20 Vcc Overshoot Specifications......................................................................................21 FSB Signal Groups ....................................................................................................23 Signal Characteristics................................................................................................24 Signal Reference Voltages .........................................................................................24 GTL+ Signal Group DC Specifications ..........................................................................25 GTL+ Asynchronous Signal Group DC Specifications ......................................................26 PWRGOOD and TAP Signal Group DC Specifications.......................................................26 VTTPWRGD DC Specifications .....................................................................................27 BSEL[2:0] and VID[5:0] DC Specifications ...................................................................27 BOOTSELECT DC Specifications ..................................................................................27 GTL+ Bus Voltage Definitions .....................................................................................28 Core Frequency to FSB Multiplier Configuration.............................................................29 BSEL[2:0] Frequency Table for BCLK[1:0] ...................................................................30 Front Side Bus Differential BCLK Specifications .............................................................32 Processor Loading Specifications.................................................................................37 Package Handling Guidelines......................................................................................37 Processor Materials ...................................................................................................38 Alphabetical Land Assignments...................................................................................44 Numerical Land Assignment .......................................................................................54 Signal Description (Sheet 1 of 9) ................................................................................64 Processor Thermal Specifications for 775_VR_CONFIG_05A Processors ............................76 Processor Thermal Specifications for 775_VR_CONFIG_06 Processors ..............................76 Thermal Profile for 775_VR_CONFIG_05A Processors.....................................................77 Thermal Profile for 775_VR_CONFIG_06 Processors ......................................................78 Thermal “Diode” Parameters using Diode Model ............................................................82 Thermal “Diode” Parameters using Transistor Model ......................................................82 Thermal “Diode” ntrim and Diode_Correction_Offset.......................................................83 Thermal Diode Interface ............................................................................................83 Power-On Configuration Option Signals .......................................................................85 Fan Heatsink Power and Signal Specifications ...............................................................92 6 Datasheet Revision History Rev No. -001 -002 • • Initial release Description Date May 2006 September 2006 • Added 775_VR_CONFIG_06 Specifications Added Celeron D processor 360 specifications • Added Celeron D processor 347 specifications • Updated Table 16, “GLT+ Bus Voltage Definitions”. • Updated VTT_SEL signal descrition in Table 25. • Added Celeron D processor 365 specifications • Added 775_VR_CONFIG_06 Specifications for Celeron D processor 347, 352, 356. -003 October 2006 -004 -005 January 2007 March 2007 Datasheet 7 Intel® Celeron® D Processor 300 Sequence Features • Available at 3.66 GHz, 3.46 GHz, 3.33 GHz, 3.2 GHz, and 3.06 GHz • Supports Intel® 64 architecture • Supports Execute Disable Bit capability • Binary compatible with applications running on previous members of the Intel microprocessor line • Intel NetBurst® microarchitecture • FSB frequency at 533 MHz • Hyper-Pipelined Technology • Advance Dynamic Execution • Very deep out-of-order execution • Enhanced branch prediction • Optimized for 32-bit applications running on advanced 32-bit operating systems • 144 Streaming SIMD Extensions 2 (SSE2) instructions The Intel® Celeron® D processor family expands Intel’s processor family into the value-priced PC market segment. Celeron D processors provide the value that offers the customer the capability to affordably get onto the Internet, and use educational programs, home-office software, and productivity applications. All of the Celeron D processors include an integrated L2 cache, and are built on Intel’s advanced CMOS process technology. The Celeron D processor is backed by over 30 years of Intel experience in manufacturing high-quality, reliable microprocessors. Intel® 64 architecture enables Celeron D processors to execute operating systems and applications written to take advantage of the Intel 64 architecture. The Celeron D processor also includes the Execute Disable Bit capability. This feature, combined with a supported operating system, allows memory to be marked as executable or non-executable. • 13 Streaming SIMD Extensions 3 (SSE3) instructions • Two 16-KB Level 1 data caches • 256-KB Advanced Transfer Cache (on-die, full-speed Level 2 (L2) cache) with 8-way associativity and Error Correcting Code (ECC) • 8-way cache associativity provides improved cache hit rate on load/store operations • Enhanced floating point and multimedia unit for enhanced video, audio, encryption, and 3D performance • Power Management capabilities • System Management mode • Multiple low-power states • 775-land Package §§ 8 Datasheet Introduction 1 Introduction The Intel® Celeron® D processors 365, 360, 356, 352, and 347 are single-core desktop processors on the 65 nm process. The processor uses Flip-Chip Land Grid Array (FCLGA6) package technology, and plugs into the LGA775 socket. Note: Note: In this document the Intel® Celeron® D processor 300 sequence on the 65 nm process is referred to as the “Celeron D processor” or simply “the processor.” In this document, unless otherwise specified, the Intel® Celeron® D processor 300 sequence refers to Intel Celeron D processors 365, 360, 356, 352, and 347. The Celeron D processor supports Intel® 64 architecture as an enhancement to Intel’s IA-32 architecture. This enhancement enables the processor to execute operating systems and applications written to take advantage of Intel 64 architecture. Further details on the 64-bit extension architecture and programming model can be found in the Intel® Extended Memory 64 Technology Software Developer Guide at http:// developer.intel.com/technology/64bitextensions/. The Celeron D processor is based on the Intel 32-bit microarchitecture and maintains the tradition of compatibility with IA-32 software. It has the Front Side Bus (FSB) data transfer speed at 533 MB/s and Level 2 cache size of 512 KB. The Celeron D processor also includes the Execute Disable Bit capability. This feature, combined with a supported operating system, allows memory to be marked as executable or non-executable. If code attempts to run in non-executable memory, the processor raises an error to the operating system. This feature can prevent some classes of viruses or worms that exploit buffer over run vulnerabilities and can, thus, help improve the overall security of the system. See the Intel® Architecture Software Developer's Manual for more detailed information. Intel will enable support components for the Celeron D processor including heatsink, heatsink retention mechanism, and socket. Manufacturability is a high priority; hence, mechanical assembly may be completed from the top of the baseboard and should not require any special tooling. The processor includes an address bus power down capability that removes power from the address and data signals when the FSB is not in use. This feature is always enabled on the processor. 1.1 Terminology A ‘#’ symbol after a signal name refers to an active low signal, indicating a signal is in the active state when driven to a low level. For example, when RESET# is low, a reset has been requested. Conversely, when NMI is high, a nonmaskable interrupt has occurred. In the case of signals where the name does not imply an active state but describes part of a binary sequence (such as address or data), the ‘#’ symbol implies that the signal is inverted. For example, D[3:0] = ‘HLHL’ refers to a hex ‘A’, and D[3:0]# = ‘LHLH’ also refers to a hex ‘A’ (H= High logic level, L= Low logic level). “Front Side Bus” refers to the interface between the processor and system core logic (a.k.a. the chipset components). The FSB is a multiprocessing interface to processors, memory, and I/O. Datasheet 9 Introduction 1.1.1 Processor Packaging Terminology Commonly used terms are explained here for clarification: • Intel® Celeron® D Processor 300 sequence on 65 nm process in the 775land Package— Processor in the FC-LGA6 package with a 512 KB L2 cache. • Processor — For this document, the term processor is the generic form of the Celeron D processor. • Keep-out zone — The area on or near the processor that system design can not use. • Intel® 945G/945GZ/945P/945PL Express chipset family — Chipset that supports DDR and DDR2 memory technology for the Celeron D processor on 65 nm process. • Processor core — Processor core die with integrated L2 cache. • LGA775 socket — The Celeron D processor on 65 nm process mates with the system board through a surface mount, 775-land, LGA socket. • Integrated heat spreader (IHS) —A component of the processor package used to enhance the thermal performance of the package. Component thermal solutions interface with the processor at the IHS surface. • Retention mechanism (RM) — Since the LGA775 socket does not include any mechanical features for heatsink attach, a retention mechanism is required. Component thermal solutions should attach to the processor via a retention mechanism that is independent of the socket. • FSB (Front Side Bus) — The electrical interface that connects the processor to the chipset; also referred to as the processor system bus or the system bus. All memory and I/O transactions as well as interrupt messages pass between the processor and chipset over the FSB. • Storage conditions — Refers to a non-operational state. The processor may be installed in a platform, in a tray, or loose. Processors may be sealed in packaging or exposed to free air. Under these conditions, processor lands should not be connected to any supply voltages, have any I/Os biased, or receive any clocks. Upon exposure to “free air”(i.e., unsealed packaging or a device removed from packaging material) the processor must be handled in accordance with moisture sensitivity labeling (MSL) as indicated on the packaging material. • Functional operation — Refers to normal operating conditions in which all processor specifications, including DC, AC, system bus, signal quality, mechanical and thermal are satisfied. 10 Datasheet Introduction 1.2 References Material and concepts available in the following documents may be beneficial when reading this document. Table 1. References Document Intel ® ® Location Celeron ® D Processor 300 Sequence Specification Update http://intel.com/design/ pentiumXE/designex/ 306830.htm D Processor, Intel® Pentium® Processor Extreme Intel Edition, Intel® Pentium® 4 Processor and Intel® Core™2 Duo Extreme Processor Thermal and Mechanical Design Guidelines NOTE: Refer to this document for 86 W processors. Intel® Core™2 Duo Desktop Processor E6000 Sequence and Intel® Pentium® 4 Processor 6x1 Sequence Thermal and Mechanical Design Guidelines NOTE: Refer To this document for 65 W processors. Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket LGA775 Socket Mechanical Design Guide Inte® 64 and IA-32 Intel Architecture Software Developer's Manual Volume 1: Basic Architecture Volume 2A: Instruction Set Reference, A-M Volume 2B: Instruction Set Reference, N-Z Volume 3A: System Programming Guide Volume 3B: System Programming Guide Pentium® www.intel.com/design/ processor/designex/ 313685.htm http://intel.com/design/ Pentium4/guides/ 302356.htm http://intel.com/design/ Pentium4/guides/ 302666.htm http://www.intel.com/ products/processor/ manuals/ §§ Datasheet 11 Introduction 12 Datasheet Electrical Specifications 2 Electrical Specifications This chapter describes the electrical characteristics of the processor interfaces and signals. DC electrical characteristics are provided. 2.1 Power and Ground Lands The Celeron D processor has 226 VCC (power), 24 VTT and 273 VSS (ground) inputs for on-chip power distribution. All power lands must be connected to VCC, while all VSS lands must be connected to a system ground plane. The processor VCC lands must be supplied with the voltage determined by the Voltage IDentification (VID) lands. Twenty-four (24) signals are denoted as VTT that provide termination for the front side bus and power to the I/O buffers. A separate supply must be implemented for these lands that meets the VTT specifications outlined in Table 4. 2.2 Decoupling Guidelines Due to its large number of transistors and high internal clock speeds, the processor is capable of generating large current swings. This may cause voltages on power planes to sag below their minimum specified values if bulk decoupling is not adequate. Larger bulk storage (CBULK), such as electrolytic or aluminum-polymer capacitors, supply current during longer lasting changes in current demand by the component, such as coming out of an idle condition. Similarly, they act as a storage well for current when entering an idle condition from a running condition. The motherboard must be designed to ensure that the voltage provided to the processor remains within the specifications listed in Table 4. Failure to do so can result in timing violations or reduced lifetime of the component. 2.2.1 VCC Decoupling VCC regulator solutions need to provide sufficient decoupling capacitance to satisfy the processor voltage specifications. This includes bulk capacitance with low effective series resistance (ESR) to keep the voltage rail within specifications during large swings in load current. In addition, ceramic decoupling capacitors are required to filter high frequency content generated by the front side bus and processor activity. Consult the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket for further information. Datasheet 13 Electrical Specifications 2.2.2 VTT Decoupling Decoupling must be provided on the motherboard. Decoupling solutions must be sized to meet the expected load. To insure compliance with the specifications, various factors associated with the power delivery solution must be considered including regulator type, power plane and trace sizing, and component placement. A conservative decoupling solution would consist of a combination of low ESR bulk capacitors and high frequency ceramic capacitors. 2.2.3 FSB Decoupling The processor integrates signal termination on the die. In addition, some of the high frequency capacitance required for the FSB is included on the processor package. However, additional high frequency capacitance must be added to the motherboard to properly decouple the return currents from the front side bus. Bulk decoupling must also be provided by the motherboard for proper [A]GTL+ bus operation. 2.3 Voltage Identification The Voltage Identification (VID) specification for the processor is defined by the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket. The voltage set by the VID signals is the reference VR output voltage to be delivered to the processor VCC lands (see Section 2.5.3 for VCC overshoot specifications). Refer to Table 14 for the DC specifications for these signals. A minimum voltage for each processor frequency is provided in Table 4. Individual processor VID values may be calibrated during manufacturing such that two devices at the same core speed may have different default VID settings. This is reflected by the VID Range values provided in Table 4. Refer to the Intel® Celeron® D Processor 300 Sequence Specification Update for further details on specific valid core frequency and VID values of the processor. The processor uses 6 voltage identification signals, VID[5:0], to support automatic selection of power supply voltages. Table 2 specifies the voltage level corresponding to the state of VID[5:0]. A ‘1’ in this table refers to a high voltage level and a ‘0’ refers to a low voltage level. If the processor socket is empty (VID[5:0] = x11111), or the voltage regulation circuit cannot supply the voltage that is requested, it must disable itself. Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket for further details. The processor provides the ability to operate while transitioning to an adjacent VID and its associated processor core voltage (VCC). This will represent a DC shift in the load line. Note that a low-to-high or high-to-low voltage state change may result in as many VID transitions as necessary to reach the target core voltage. Transitions above the specified VID are not permitted. Table 4 includes VID step sizes and DC shift ranges. Minimum and maximum voltages must be maintained as shown in Table 5 and Figure 1 as measured across the VCC_SENSE and VSS_SENSE lands. The VRM or VRD used must be capable of regulating its output to the value defined by the new VID. DC specifications for dynamic VID transitions are included in Table 4, and Table 5. Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket for further details. 14 Datasheet Electrical Specifications Table 2. VID5 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Voltage Identification Definition VID 0.8375 0.8500 0.8625 0.8750 0.8875 0.9000 0.9125 0.9250 0.9375 0.9500 0.9625 0.9750 0.9875 1.0000 1.0125 1.0250 1.0375 1.0500 1.0625 1.0750 1.0875 VR output off VR output off 1.1000 1.1125 1.1250 1.1375 1.1500 1.1625 1.1750 1.1875 1.2000 VID5 VID4 VID3 VID2 VID1 VID0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 VID 1.2125 1.2250 1.2375 1.2500 1.2625 1.2750 1.2875 1.3000 1.3125 1.3250 1.3375 1.3500 1.3625 1.3750 1.3875 1.4000 1.4125 1.4250 1.4375 1.4500 1.4625 1.4750 1.4875 1.5000 1.5125 1.5250 1.5375 1.5500 1.5625 1.5750 1.5875 1.6000 VID4 VID3 VID2 VID1 VID0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 Datasheet 15 Electrical Specifications 2.4 Reserved, Unused, and TESTHI Signals All RESERVED lands must remain unconnected. Connection of these lands to VCC, VSS, VTT, or to any other signal (including each other) can result in component malfunction or incompatibility with future processors. See Chapter 4 for a land listing of the processor and the location of all RESERVED lands. In a system level design, on-die termination has been included by the processor to allow signals to be terminated within the processor silicon. Most unused GTL+ inputs should be left as no connects as GTL+ termination is provided on the processor silicon. However, see Table 7 for details on GTL+ signals that do not include on-die termination. Unused active high inputs, should be connected through a resistor to ground (VSS). Unused outputs can be left unconnected, however this may interfere with some TAP functions, complicate debug probing, and prevent boundary scan testing. A resistor must be used when tying bidirectional signals to power or ground. When tying any signal to power or ground, a resistor will also allow for system testability. Resistor values should be within ± 20% of the impedance of the motherboard trace for front side bus signals. For unused GTL+ input or I/O signals, use pull-up resistors of the same value as the on-die termination resistors (RTT). For details see Table 16. TAP, GTL+ Asynchronous inputs, and GTL+ Asynchronous outputs do not include on-die termination. Inputs and utilized outputs must be terminated on the motherboard. Unused outputs may be terminated on the motherboard or left unconnected. Note that leaving unused outputs unterminated may interfere with some TAP functions, complicate debug probing, and prevent boundary scan testing. All TESTHI[13:0] lands should be individually connected to VTT via a pull-up resistor that matches the nominal trace impedance. The TESTHI signals may use individual pull-up resistors or be grouped together as detailed below. A matched resistor must be used for each group: • TESTHI[1:0] • TESTHI[7:2] • TESTHI8 – cannot be grouped with other TESTHI signals • TESTHI9 – cannot be grouped with other TESTHI signals • TESTHI10 – cannot be grouped with other TESTHI signals • TESTHI11 – cannot be grouped with other TESTHI signals • TESTHI12 – cannot be grouped with other TESTHI signals • TESTHI13 – cannot be grouped with other TESTHI signals However, use of boundary scan test will not be functional if these lands are connected together. For optimum noise margin, all pull-up resistor values used for TESTHI[13:0] lands should have a resistance value within ± 20% of the impedance of the board transmission line traces. For example, if the nominal trace impedance is 50 Ω, then a value between 40 Ω and 60 Ω should be used. 16 Datasheet Electrical Specifications 2.5 2.5.1 Voltage and Current Specification Absolute Maximum and Minimum Ratings Table 3 specifies absolute maximum and minimum ratings. Within functional operation limits, functionality and long-term reliability can be expected. At conditions outside functional operation condition limits, but within absolute maximum and minimum ratings, neither functionality nor long-term reliability can be expected. If a device is returned to conditions within functional operation limits after having been subjected to conditions outside these limits, but within the absolute maximum and minimum ratings, the device may be functional, but with its lifetime degraded depending on exposure to conditions exceeding the functional operation condition limits. At conditions exceeding absolute maximum and minimum ratings, neither functionality nor long-term reliability can be expected. Moreover, if a device is subjected to these conditions for any length of time then, when returned to conditions within the functional operating condition limits, it will either not function, or its reliability will be severely degraded. Although the processor contains protective circuitry to resist damage from static electric discharge, precautions should always be taken to avoid high static voltages or electric fields. Table 3. Absolute Maximum and Minimum Ratings Symbol VCC VTT TC TSTORAGE Parameter Core voltage with respect to VSS FSB termination voltage with respect to VSS Processor case temperature Processor storage temperature Min –0.3 –0.3 See Chapter 5 –40 Max 1.55 1.55 See Chapter 5 85 Unit V V °C °C Notes1, 3, 4, 5 2 NOTES: 1. For functional operation, all processor electrical, signal quality, mechanical and thermal specifications must be satisfied. 2. Excessive overshoot or undershoot on any signal will likely result in permanent damage to the processor. 3. Storage temperature is applicable to storage conditions only. In this scenario, the processor must not receive a clock, and no lands can be connected to a voltage bias. Storage within these limits will not affect the long-term reliability of the device. For functional operation, please refer to the processor case temperature specifications. 4. This rating applies to the processor and does not include any tray or packaging. 5. Failure to adhere to this specification can affect the long term reliability of the processor. Datasheet 17 Electrical Specifications 2.5.2 Table 4. Symbol VID Range DC Voltage and Current Specification Voltage and Current Specifications Parameter VID Processor Number VCC for 775_VR_CONFIG_05A 3.33 GHz 3.2 GHz 3.06 GHz ICC for 775_VR_CONFIG_05A 3.33 GHz 3.2 GHz 3.06_GHz ICC for 775_VR_CONFIG_06 3.66 GHz 3.46 GHz 3.33 GHz 3.2 GHz 3.06_GHz ICC Stop-Grant for 775_VR_CONFIG_05A 3.33 GHz 3.2 GHz 3.06_GHz ICC Stop-Grant for 775_VR_CONFIG_06 3.66 GHz 3.46 GHz 3.33 GHz 3.2 GHz 3.06_GHz — 1.14 — 1.20 — — 40 40 40 40 40 ICC 1.26 A V 10 11, 12 Min 1.25 Typ — Max 1.325 Unit V Notes1,2 3 VCC 356 352 347 Processor Number 356 352 347 Processor Number 365 360 356 352 347 Processor Number 356 352 347 Processor Number 365 360 356 352 347 Refer to Table 5 and Figure 1 V 4, 5, 6 — — 100 100 100 A 65 7 ICC — — 65 65 65 65 — — 50 50 50 A 8,9 ISGNT ITCC VTT VTT_OUT_LEFT and VTT_OUT_RIGHT ICC ITT ITT_Power-UP ICC_VCCA ICC_VCCIOPLL ICC_GTLREF ICC TCC active FSB termination voltage (DC + AC specifications) DC Current that may be drawn from VTT_OUT_LEFT and VTT_OUT_RIGHT per land Steady state FSB termination current Power-up FSB termination current ICC for PLL lands ICC for I/O PLL land ICC for GTLREF — — 580 mA 13, 14 13, 15 — — 3.5 4.5 A A mA mA μA — — — — — — 35 26 200 18 Datasheet Electrical Specifications NOTES: 1. Unless otherwise noted, all specifications in this table are based on estimates and simulations or empirical data. These specifications will be updated with characterized data from silicon measurements at a later date. 2. Adherence to the voltage specifications for the processor are required to ensure reliable processor operation. 3. Each processor is programmed with a maximum valid voltage identification value (VID) that is set at manufacturing and can not be altered. Individual maximum VID values are calibrated during manufacturing such that two processors at the same frequency may have different settings within the VID range. 4. These voltages are targets only. A variable voltage source should exist on systems in the event that a different voltage is required. See Section 2.3 and Table 2 for more information. 5. The voltage specification requirements are measured across VCC_SENSE and VSS_SENSE lands at the socket with a 100 MHz bandwidth oscilloscope, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is not coupled into the oscilloscope probe. 6. Refer to Table 5 and Figure 1 for the minimum, typical, and maximum VCC allowed for a given current. The processor should not be subjected to any VCC and ICC combination wherein VCC exceeds VCC_MAX for a given current. 7. ICC_MAX is specified at VCC_MAX 8. The current specified is also for AutoHALT State. 9. ICC Stop-Grant is specified at VCC_MAX. 10.The maximum instantaneous current the processor will draw while the thermal control circuit is active (as indicated by the assertion of PROCHOT#) is the same as the maximum ICC for the processor. 11.VTT must be provided via a separate voltage source and not be connected to VCC. This specification is measured at the land. 12.Baseboard bandwidth is limited to 20 MHz. 13.This is maximum total current drawn from VTT plane by only the processor. This specification does not include the current coming from RTT (through the signal line). Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket to determine the total ITT drawn by the system. 14.This is a steady-state ITT current specification that is applicable when both VTT and VCC are high. 15.This is a power-up peak current specification that is applicable when VTT is high and VCC is low. Datasheet 19 Electrical Specifications Table 5. VCC Static and Transient Tolerance for 775_VR_CONFIG_05A and 775_VR_CONFIG_06 Processors Voltage Deviation from VID Setting (V)1, ICC (A) Maximum Voltage 1.7 mΩ 0.000 -0.008 -0.016 -0.023 -0.031 -0.039 -0.047 -0.054 -0.062 -0.070 -0.078 -0.085 -0.093 -0.101 -0.109 -0.116 -0.121 -0.132 -0.140 -0.147 -0.155 Typical Voltage 1.75 mΩ -0.019 -0.027 -0.035 -0.043 -0.051 -0.059 -0.067 -0.075 -0.083 -0.091 -0.099 -0.107 -0.115 -0.123 -0.131 -0.139 -0.144 -0.155 -0.163 -0.171 -0.179 2, 3, 4 Minimum Voltage 1.8 mΩ -0.038 -0.046 -0.055 -0.063 -0.071 -0.079 -0.088 -0.096 -0.104 -0.112 -0.121 -0.129 -0.137 -0.145 -0.154 -0.162 -0.167 -0.178 -0.187 -0.195 -0.203 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 NOTES: 1. The loadline specification includes both static and transient limits except for overshoot allowed as shown in Section 2.5.3. 2. This table is intended to aid in reading discrete points on Figure 1. 3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE lands. Voltage regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS lands. Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket for socket loadline guidelines and VR implementation details. 4. Adherence to this loadline specification for the Celeron D processor is required to ensure reliable processor operation. 20 Datasheet Electrical Specifications Figure 1. VCC Static and Transient Tolerance for 775_VR_CONFIG_05A and 775_VR_CONFIG_06 Processors Icc [A] 0 VID - 0.000 VID - 0.019 VID - 0.038 VID - 0.057 VID - 0.076 VID - 0.095 Vcc [V] Vcc Typical VID - 0.114 VID - 0.133 VID - 0.152 VID - 0.171 VID - 0.190 VID - 0.209 VID - 0.228 Vcc Minimum Vcc Maximum 10 20 30 40 50 60 70 80 90 100 NOTES: 1. The loadline specification includes both static and transient limits except for overshoot allowed as shown in Section 2.5.3. 2. This loadline specification shows the deviation from the VID set point. 3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE lands. Voltage regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS lands. Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket for socket loadline guidelines and VR implementation details. 2.5.3 VCC Overshoot The Celeron D processor can tolerate short transient overshoot events where VCC exceeds the VID voltage when transitioning from a high to low current load condition. This overshoot cannot exceed VID + VOS_MAX (VOS_MAX is the maximum allowable overshoot voltage). The time duration of the overshoot event must not exceed TOS_MAX (TOS_MAX is the maximum allowable time duration above VID). These specifications apply to the processor die voltage as measured across the VCC_SENSE and VSS_SENSE lands. Table 6. Vcc Overshoot Specifications Symbol VOS_MAX TOS_MAX Parameter Magnitude of VCC overshoot above VID Time duration of VCC overshoot above VID Min — — Max 0.050 25 Unit V μs Figure 2 2 Notes 1 1 NOTES: 1. Adherence to these specifications for the Celeron D processor is required to ensure reliable processor operation. Datasheet 21 Electrical Specifications Figure 2. VCC Overshoot Example Waveform Example Overshoot Waveform VID + 0.050 VOS Voltage (V) VID TOS Time TOS: Overshoot time above VID VOS: Overshoot above VID NOTES: 1. VOS is measured overshoot voltage. 2. TOS is measured time duration above VID. 2.5.4 Die Voltage Validation Overshoot events on processor must meet the specifications in Table 6 when measured across the VCC_SENSE and VSS_SENSE lands. Overshoot events that are < 10 ns in duration may be ignored. These measurements of processor die level overshoot must be taken with a bandwidth limited oscilloscope set to a greater than or equal to 100 MHz bandwidth limit. 2.6 Signaling Specifications Most processor Front Side Bus signals use Gunning Transceiver Logic (GTL+) signaling technology. This technology provides improved noise margins and reduced ringing through low voltage swings and controlled edge rates. Platforms implement a termination voltage level for GTL+ signals defined as VTT. Because platforms implement separate power planes for each processor (and chipset), separate VCC and VTT supplies are necessary. This configuration allows for improved noise tolerance as processor frequency increases. Speed enhancements to data and address busses have caused signal integrity considerations and platform design methods to become even more critical than with previous processor families. The GTL+ inputs require a reference voltage (GTLREF) that is used by the receivers to determine if a signal is a logical 0 or a logical 1. GTLREF must be generated on the motherboard (see Table 16 for GTLREF specifications). Termination resistors (RTT) for GTL+ signals are provided on the processor silicon and are terminated to VTT. Intel chipsets will also provide on-die termination, thus eliminating the need to terminate the bus on the motherboard for most GTL+ signals. 22 Datasheet Electrical Specifications 2.6.1 FSB Signal Groups The front side bus signals have been combined into groups by buffer type. GTL+ input signals have differential input buffers that use GTLREF[1:0] as a reference level. In this document, the term “GTL+ Input” refers to the GTL+ input group as well as the GTL+ I/O group when receiving. Similarly, “GTL+ Output” refers to the GTL+ output group as well as the GTL+ I/O group when driving. With the implementation of a source synchronous data bus comes the need to specify two sets of timing parameters. One set is for common clock signals that are dependent upon the rising edge of BCLK0 (ADS#, HIT#, HITM#, etc.) and the second set is for the source synchronous signals that are relative to their respective strobe lines (data and address) as well as the rising edge of BCLK0. Asychronous signals are still present (A20M#, IGNNE#, etc.) and can become active at any time during the clock cycle. Table 7 identifies which signals are common clock, source synchronous, and asynchronous. Table 7. FSB Signal Groups (Sheet 1 of 2) Signal Group GTL+ Common Clock Input GTL+ Common Clock I/O Type Synchronous to BCLK[1:0] Synchronous to BCLK[1:0] Signals1 BPRI#, DEFER#, RS[2:0]#, RSP#, TRDY# AP[1:0]#, ADS#, BINIT#, BNR#, BPM[5:0]#, BR0#, DBSY#, DP[3:0]#, DRDY#, HIT#, HITM#, LOCK#, MCERR# Signals REQ[4:0]#, A[16:3]#2 GTL+ Source Synchronous I/O Synchronous to assoc. strobe A[35:17]# 2 Associated Strobe ADSTB0# ADSTB1# DSTBP0#, DSTBN0# DSTBP1#, DSTBN1# DSTBP2#, DSTBN2# DSTBP3#, DSTBN3# D[15:0]#, DBI0# D[31:16]#, DBI1# D[47:32]#, DBI2# D[63:48]#, DBI3# GTL+ Strobes GTL+ Asynchronous Input GTL+ Asynchronous Output GTL+ Asynchronous Input/Output TAP Input Synchronous to BCLK[1:0] ADSTB[1:0]#, DSTBP[3:0]#, DSTBN[3:0]# A20M#, IGNNE#, INIT#, LINT0/INTR, LINT1/NMI, SMI#, STPCLK#, PWRGOOD, RESET# FERR#/PBE#, IERR#, THERMTRIP# PROCHOT# Synchronous to TCK TCK, TDI, TMS, TRST# Datasheet 23 Electrical Specifications Table 7. FSB Signal Groups (Sheet 2 of 2) Signal Group TAP Output FSB Clock Type Synchronous to TCK Clock TDO BCLK[1:0], ITP_CLK[1:0]3 VCC, VTT, VCCA, VCCIOPLL, VID[5:0], VSS, VSSA, GTLREF[1:0], COMP[5:4,1:0], RESERVED, TESTHI[13:0], THERMDA, THERMDC, VCC_SENSE, VCC_MB_REGULATION, VSS_SENSE, VSS_MB_REGULATION, BSEL[2:0], SKTOCC#, DBR#3, VTTPWRGD, BOOTSELECT, VTT_OUT_LEFT, VTT_OUT_RIGHT, VTT_SEL, LL_ID[1:0], MSID[1:0], FCx, IMPSEL Signals1 Power/Other NOTES: 1. Refer to Section 4.2 for signal descriptions. 2. The value of these signals during the active-to-inactive edge of RESET# defines the processor configuration options. See Section 6.1 for details. 3. In processor systems where no debug port is implemented on the system board, these signals are used to support a debug port interposer. In systems with the debug port implemented on the system board, these signals are no connects. . Table 8. Signal Characteristics Signals with RTT A[35:3]#, ADS#, ADSTB[1:0]#, AP[1:0]#, BINIT#, BNR#, BOOTSELECT1, BPRI#, D[63:0]#, DBI[3:0]#, DBSY#, DEFER#, DP[3:0]#, DRDY#, DSTBN[3:0]#, DSTBP[3:0]#, HIT#, HITM#, LOCK#, MCERR#, MSID[1:0]1, PROCHOT#, REQ[4:0]#, RS[2:0]#, RSP#, TRDY#, IMPSEL2 Open Drain Signals2 THERMTRIP#, FERR#/PBE#, IERR#, BPM[5:0]#, BR0#, TDO, LL_ID[1:0], FCx Signals with No RTT A20M#, BCLK[1:0], BPM[5:0]#, BSEL[2:0], COMP[5:4,1:0], FERR#/PBE#, IERR#, IGNNE#, INIT#, ITP_CLK[1:0], LINT0/INTR, LINT1/NMI, PWRGOOD, RESET#, SKTOCC#, SMI#, STPCLK#, TDO, TESTHI[13:0], THERMDA, THERMDC, THERMTRIP#, VID[5:0], VTTPWRGD, GTLREF[1:0], TCK, TDI, TMS, TRST#, VTT_SEL NOTES: 1. These signals have a 500–5000 Ω pull-up to VTT rather than on-die termination. 2. Signals that do not have RTT, nor are actively driven to their high-voltage level. Table 9. Signal Reference Voltages GTLREF BPM[5:0]#, LINT0/INTR, LINT1/NMI, RESET#, BINIT#, BNR#, HIT#, HITM#, MCERR#, PROCHOT#, BR0#, A[35:0]#, ADS#, ADSTB[1:0]#, AP[1:0]#, BPRI#, D[63:0]#, DBI[3:0]#, DBSY#, DEFER#, DP[3:0]#, DRDY#, DSTBN[3:0]#, DSTBP[3:0]#, LOCK#, REQ[4:0]#, RS[2:0]#, RSP#, TRDY# VTT/2 BOOTSELECT, VTTPWRGD, A20M#, IGNNE#, INIT#, MSID[1:0], PWRGOOD1, SMI#, STPCLK#, TCK1, TDI1, TMS1, TRST#1 1. These signals also have hysteresis added to the reference voltage. See Table 12 for more NOTES: information. 24 Datasheet Electrical Specifications 2.6.2 GTL+ Asynchronous Signals Legacy input signals such as A20M#, IGNNE#, INIT#, SMI#, and STPCLK# use CMOS input buffers. All of these signals follow the same DC requirements as GTL+ signals; however, the outputs are not actively driven high (during a logical 0 to 1 transition) by the processor. These signals do not have setup or hold time specifications in relation to BCLK[1:0]. All of the GTL+ Asynchronous signals are required to be asserted/de-asserted for at least six BCLKs in order for the processor to recognize the proper signal state. See Section 2.6.3 for the DC specifications for the GTL+ Asynchronous signal groups. See Section 6.2 for additional timing requirements for entering and leaving the low power states. 2.6.3 Processor DC Specifications The processor DC specifications in this section are defined at the processor core (pads) unless otherwise stated. All specifications apply to all frequencies and cache sizes unless otherwise stated. Table 10. Symbol VIL VIH VOH IOL ILI ILO RON GTL+ Signal Group DC Specifications Parameter Input Low Voltage Input High Voltage Output High Voltage Output Low Current Input Leakage Current Output Leakage Current Buffer On Resistance Min 0.0 GTLREF + (0.10 * VTT) 0.90*VTT N/A N/A N/A 6 Max GTLREF – (0.10 * VTT) VTT VTT VTT_MAX/ [(0.50*RTT_MIN)+(RON_MIN)] ± 200 ± 200 12 Unit V V V A µA µA Ω Notes1 2, 3 4, 5, 3 3, 5 6 7 NOTES: 1. Unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. VIL is defined as the voltage range at a receiving agent that will be interpreted as a logical low value. 3. The VTT referred to in these specifications is the instantaneous VTT. 4. VIH is defined as the voltage range at a receiving agent that will be interpreted as a logical high value. 5. VIH and VOH may experience excursions above VTT. However, input signal drivers must comply with the signal quality specifications. 6. Leakage to VSS with land held at VTT. 7. Leakage to VTT with land held at 300 mV. Datasheet 25 Electrical Specifications Table 11. Symbol VIL VIH VOH IOL ILI ILO RON GTL+ Asynchronous Signal Group DC Specifications Parameter Input Low Voltage Input High Voltage Output High Voltage Output Low Current Input Leakage Current Output Leakage Current Buffer On Resistance Min 0.0 VTT/2 + (0.10 * VTT) 0.90*VTT — N/A N/A 6 Max VTT/2 – (0.10 * VTT) VTT VTT VTT/ [(0.50*RTT_MIN)+(RON_MIN)] ± 200 ± 200 12 Unit V V V A µA µA Ω Notes1 2, 3 4, 5, 6, 3 7, 5, 6 8 9 10 NOTES: 1. Unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. VIL is defined as the voltage range at a receiving agent that will be interpreted as a logical low value. 3. LINT0/INTR and LINT1/NMI use GTLREF as a reference voltage. For these two signals VIH = GTLREF + (0.10 * VTT) and VIL= GTLREF – (0.10 * VTT). 4. VIH is defined as the voltage range at a receiving agent that will be interpreted as a logical high value. 5. VIH and VOH may experience excursions above VTT. However, input signal drivers must comply with the signal quality specifications. 6. The VTT referred to in these specifications refers to instantaneous VTT. 7. All outputs are open drain. 8. The maximum output current is based on maximum current handling capability of the buffer and is not specified into the test load. 9. Leakage to VSS with land held at VTT. 10.Leakage to VTT with land held at 300 mV. . Table 12. PWRGOOD and TAP Signal Group DC Specifications Symbol VHYS Parameter Input Hysteresis PWRGOOD Input lowto-high threshold voltage TAP Input low-to-high threshold voltage PWRGOOD Input highto-low threshold voltage TAP Input high-to-low threshold voltage VOH IOL ILI ILO RON Output High Voltage Output Low Current Input Leakage Current Output Leakage Current Buffer On Resistance Min 120 0.5 * (VTT + VHYS_MIN + 0.24) 0.5 * (VTT + VHYS_MIN) 0.4 * VTT 0.5 * (VTT – VHYS_MAX) N/A — — — 6 Max 396 0.5 * (VTT + VHYS_MAX + 0.24) 0.5 * (VTT + VHYS_MAX) 0.6 * VTT 0.5 * (VTT – VHYS_MIN) VTT 22.2 ± 200 ± 200 12 Unit mV V V V V V mA µA µA Ω Notes1,2 3 4, 5 VT+ 4 4 VT- 4 6, 4 7 8 9 NOTES: 1. Unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. All outputs are open drain. 3. VHYS represents the amount of hysteresis, nominally centered about 0.5 * VTT, for all TAP inputs. 4. The VTT referred to in these specifications refers to instantaneous VTT. 26 Datasheet Electrical Specifications 5. 0.24 V is defined at 20% of nominal VTT of 1.2 V. 6. The TAP signal group must meet the signal quality specifications. 7. The maximum output current is based on maximum current handling capability of the buffer and is not specified into the test load. 8. Leakage to VSS with land held at VTT. 9. Leakage to VTT with land held at 300 mV. Table 13. VTTPWRGD DC Specifications Symbol VIL VIH Parameter Input Low Voltage Input High Voltage Min — 0.9 Typ — — Max 0.3 — Unit V V Table 14. BSEL[2:0] and VID[5:0] DC Specifications Symbol RON (BSEL) RON (VID) IOL ILO VTOL Parameter Buffer On Resistance Buffer On Resistance Max Land Current Output Leakage Current Voltage Tolerance Max 120 120 2.4 200 VTT(max) Unit Ω Ω mA µA V Notes1, 3 2 - NOTES: 1. Unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. These parameters are not tested and are based on design simulations. 3. Leakage to VSS with land held at 1.2 V. Table 15. BOOTSELECT DC Specifications Symbol VIL VIH Parameter Input Low Voltage Input High Voltage Min — 0.96 Typ — — Max 0.24 — Unit V V Notes 1 1 NOTES: 1. These parameters are not tested and are based on design simulations. Datasheet 27 Electrical Specifications 2.6.3.1 GTL+ Front Side Bus Specifications In most cases, termination resistors are not required as these are integrated into the processor silicon. See Table 8 for details on which GTL+ signals do not include on-die termination. Valid high and low levels are determined by the input buffers by comparing with a reference voltage called GTLREF. Table 16 lists the GTLREF specifications. The GTL+ Reference voltage (GTLREF) should be generated on the system board using high precision voltage divider circuits. Table 16. GTL+ Bus Voltage Definitions Symbol GTLREF_PU GTLREF_PD RPULLUP Parameter GTLREF pull up resistor GTLREF pull down resistor On die pull-up for BOOTSELECT signal 60 Ω Platform Termination Resistance 50 Ω Platform Termination Resistance 60 Ω Platform Termination COMP[1:0] COMP Resistance 50 Ω Platform Termination COMP Resistance 60 Ω Platform Termination COMP[5:4] COMP Resistance 50 Ω Platform Termination COMP Resistance Min 124 * 0.99 210 * 0.99 500 51 39 59.8 49.9 * 0.99 59.8 49.9 * 0.99 Typ 124 210 — 60 50 60.4 49.9 60.4 49.9 Max 124 * 1.01 210 * 1.01 5000 66 55 61 49.9 * 1.01 61 49.9 * 1.01 Units Ω Ω Ω Ω Ω Ω Ω Ω Ω Notes1 2,3 2,3 4 5 RTT 5 6 6 6 6 NOTES: 1. Unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. GTLREF is to be generated from VTT by a voltage divider of 1% resistors (one divider for each GTLREF land). 3. For Intel 865 Express chipset LGA775 boards only, the GTLREF_PU should be 49.9 Ω 1%, and the GTLREF_PD should be 100 Ω 1%. 4. These pull-ups are to VTT. 5. RTT is the on-die termination resistance measured at VTT/2 of the GTL+ output driver. The IMPSEL land is used to select a 50 Ω or 60 Ω buffer and RTT value. 6. COMP resistance must be provided on the system board with 1% resistors. COMP[1:0] resistors are to VSS. COMP[5:4] resistors are to VTT. 28 Datasheet Electrical Specifications 2.7 2.7.1 Clock Specifications Front Side Bus Clock (BCLK[1:0]) and Processor Clocking BCLK[1:0] directly controls the FSB interface speed as well as the core frequency of the processor. As in previous generation processors, the Celeron D processor core frequency is a multiple of the BCLK[1:0] frequency. The processor bus ratio multiplier will be set at its default ratio during manufacturing. Refer to Table 17 for the Celeron D processor supported ratios. The Celeron D processor uses a differential clocking implementation. For more information on the Celeron D processor clocking, contact your Intel field representative. Table 17. Core Frequency to FSB Multiplier Configuration Multiplication of System Core Frequency to FSB Frequency 1/12 1/13 1/14 1/15 1/16 1/17 1/18 1/19 1/20 1/21 1/22 1/23 1/24 1/25 Core Frequency (133 MHz BCLK/ 533 MHz FSB) 1.6 GHz 1.8 GHz 1.9 GHz 2 GHz 2.1 GHz 2.3 GHz 2.4 GHz 2.5 GHz 2.7 GHz 2.8 GHz 2.9 GHz 3 GHz 3.2 GHz 3.3 GHz Notes1, 2 NOTES: 1. Individual processors operate only at or below the rated frequency. 2. Listed frequencies are not necessarily committed production frequencies. Datasheet 29 Electrical Specifications 2.7.2 FSB Frequency Select Signals (BSEL[2:0]) The BSEL[2:0] signals are used to select the frequency of the processor input clock (BCLK[1:0]). Table 18 defines the possible combinations of the signals and the frequency associated with each combination. The required frequency is determined by the processor, chipset, and clock synthesizer. All agents must operate at the same frequency. The Celeron D processor will operate at an 533 MHz FSB frequency (selected by a 133 MHz BCLK[1:0] frequency). For more information about these signals, refer to Section 4.2. Table 18. BSEL[2:0] Frequency Table for BCLK[1:0] BSEL2 L L L L H H H H BSEL1 L L H H H H L L BSEL0 L H H L L H H L FSB Frequency RESERVED 133 MHz RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 2.7.3 Phase Lock Loop (PLL) and Filter VCCA and VCCIOPLL are power sources required by the PLL clock generators for the Celeron D processor silicon. Since these PLLs are analog in nature, they require low noise power supplies for minimum jitter. Jitter is detrimental to the system: it degrades external I/O timings as well as internal core timings (i.e., maximum frequency). To prevent this degradation, these supplies must be low pass filtered from VTT. The AC low-pass requirements, with input at VTT are as follows: • < 0.2 dB gain in pass band • < 0.5 dB attenuation in pass band < 1 Hz • > 34 dB attenuation from 1 MHz to 66 MHz • > 28 dB attenuation from 66 MHz to core frequency The filter requirements are illustrated in Figure 3. 30 Datasheet Electrical Specifications . Figure 3. Phase Lock Loop (PLL) Filter Requirements 0.2 dB 0 dB –0.5 dB Forbidden Zone Forbidden Zone –28 dB –34 dB DC 1 Hz Passband fpeak 1 MHz 66 MHz High Frequency Band fcore Filt S NOTES: 1. Diagram not to scale. 2. No specification for frequencies beyond fcore (core frequency). 3. fpeak, if existent, should be less than 0.05 MHz. 4. fcore represents the maximum core frequency supported by the platform. Datasheet 31 Electrical Specifications 2.7.4 Table 19. BCLK[1:0] Specifications Front Side Bus Differential BCLK Specifications Symbol VL VH VCROSS(abs) VCROSS(rel) ΔVCROSS VOS VUS VRBM VTM Parameter Input Low Voltage Input High Voltage Absolute Crossing Point Relative Crossing Point Range of Crossing Points Overshoot Undershoot Ringback Margin Threshold Region Min -0.150 0.660 0.250 0.250 + 0.5(VHAVG – 0.700) N/A N/A -0.300 0.200 VCROSS – 0.100 Typ 0.000 0.700 N/A N/A N/A N/A N/A N/A N/A Max N/A 0.850 0.550 0.550 + 0.5(VHAVG – 0.700) 0.140 VH + 0.3 N/A N/A VCROSS + 0.100 Unit V V V V V V V V V Notes1 2, 3 4, 3, 5 6 7 8 9 NOTES: 1. Unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. Crossing voltage is defined as the instantaneous voltage value when the rising edge of BCLK0 equals the falling edge of BCLK1. 3. The crossing point must meet the absolute and relative crossing point specifications simultaneously. 4. VHavg is the statistical average of the VH measured by the oscilloscope. 5. VHavg can be measured directly using “Vtop” on Agilent* oscilloscopes and “High” on Tektronix* oscilloscopes. 6. Overshoot is defined as the absolute value of the maximum voltage. 7. Undershoot is defined as the absolute value of the minimum voltage. 8. Ringback Margin is defined as the absolute voltage difference between the maximum Rising Edge Ringback and the maximum Falling Edge Ringback. 9. Threshold Region is defined as a region entered around the crossing point voltage in which the differential receiver switches. It includes input threshold hysteresis. §§ 32 Datasheet Package Mechanical Specifications 3 Package Mechanical Specifications The Celeron D processor is packaged in a Flip-Chip Land Grid Array (FC-LGA4) package that interfaces with the motherboard via an LGA775 socket. The package consists of a processor core mounted on a substrate land-carrier. An integrated heat spreader (IHS) is attached to the package substrate and core and serves as the mating surface for processor component thermal solutions, such as a heatsink. Figure 4 shows a sketch of the processor package components and how they are assembled together. Refer to the LGA775 Socket Mechanical Design Guide for complete details on the LGA775 socket. The package components shown in Figure 4 include the following: • • • • • Integrated Heat Spreader (IHS) Thermal Interface Material (TIM) Processor core (die) Package substrate Capacitors Figure 4. Processor Package Assembly Sketch Core (die) IHS Substrate TIM Capacitors LGA775 Socket System Board NOTE: 1. Socket and motherboard are included for reference and are not part of processor package. 3.1 Package Mechanical Drawing The package mechanical drawings are shown in Figure 5 and Figure 6. The drawings include dimensions necessary to design a thermal solution for the processor. These dimensions include: • • • • • • • Package reference with tolerances (total height, length, width, etc.) IHS parallelism and tilt Land dimensions Top-side and back-side component keep-out dimensions Reference datums All drawing dimensions are in mm [in]. Guidelines on potential IHS flatness variation with socket load plate actuation and installation of the cooling solution is available in the processor Thermal and Mechanical Design Guidelines. Datasheet 33 Package Mechanical Specifications Figure 5. Processor Package Drawing (Sheet 1 of 3) 34 Datasheet Package Mechanical Specifications Figure 6. Processor Package Drawing (Sheet 2 of 3) Datasheet 35 Package Mechanical Specifications Figure 7. Processor Package Drawing (Sheet 3 of 3) 36 Datasheet Package Mechanical Specifications 3.2 Processor Component Keep-Out Zones The processor may contain components on the substrate that define component keepout zone requirements. A thermal and mechanical solution design must not intrude into the required keep-out zones. Decoupling capacitors are typically mounted to either the topside or land-side of the package substrate. See Figure 5 and Figure 6 for keep-out zones. The location and quantity of package capacitors may change due to manufacturing efficiencies but will remain within the component keep-in. 3.3 Package Loading Specifications Table 20 provides dynamic and static load specifications for the processor package. These mechanical maximum load limits should not be exceeded during heatsink assembly, shipping conditions, or standard use condition. Also, any mechanical system or component testing should not exceed the maximum limits. The processor package substrate should not be used as a mechanical reference or load-bearing surface for thermal and mechanical solution. The minimum loading specification must be maintained by any thermal and mechanical solutions. . Table 20. Processor Loading Specifications Parameter Static Dynamic Minimum 80 N [17 lbf] — Maximum 311 N [70 lbf] 756 N [170 lbf] Notes 1, 2, 3 1, 3, 4 NOTES: 1. These specifications apply to uniform compressive loading in a direction normal to the processor IHS. 2. This is the maximum force that can be applied by a heatsink retention clip. The clip must also provide the minimum specified load on the processor package. 3. These specifications are based on limited testing for design characterization. Loading limits are for the package only and do not include the limits of the processor socket. 4. Dynamic loading is defined as an 11 ms duration average load superimposed on the static load requirement. 3.4 Package Handling Guidelines Table 21 includes a list of guidelines on package handling in terms of recommended maximum loading on the processor IHS relative to a fixed substrate. These package handling loads may be experienced during heatsink removal. Table 21. Package Handling Guidelines Parameter Shear Tensile Torque Maximum Recommended 311 N [70 lbf] 111 N [25 lbf] 3.95 N-m [35 lbf-in] Notes 1, 2 2, 3 2, 4 NOTES: 1. A shear load is defined as a load applied to the IHS in a direction parallel to the IHS top surface. 2. These guidelines are based on limited testing for design characterization. 3. A tensile load is defined as a pulling load applied to the IHS in a direction normal to the IHS surface. 4. A torque load is defined as a twisting load applied to the IHS in an axis of rotation normal to the IHS top surface. Datasheet 37 Package Mechanical Specifications 3.5 Package Insertion Specifications The Celeron D processor can be inserted into and removed from a LGA775 socket 15 times. The socket should meet the LGA775 requirements detailed in the LGA775 Socket Mechanical Design Guide. 3.6 Processor Mass Specification The typical mass of the Celeron D processor is 21.5 g [0.76 oz]. This mass [weight] includes all the components that are included in the package. 3.7 Table 22. Processor Materials Table 22 lists some of the package components and associated materials. Processor Materials Component Integrated Heat Spreader (IHS) Substrate Substrate Lands Material Nickel Plated Copper Fiber Reinforced Resin Gold Plated Copper 3.8 Processor Markings Figure 8 shows the topside markings on the processor. This diagram is to aid in the identification of the Celeron D processor. Figure 8. Processor Top-Side Marking Example Brand Processor Number/ S-Spec/ Country of Assy Frequency/L2 Cache/Bus/FMB FPO INTEL m © ‘05 XXXXXXXX 356 SLxxx [COO] 3.33GHZ/512K/533/05A [FPO] Unique Unit Identifier ATPO Serial # ATPO S/N 2-D Matrix Mark 38 Datasheet Package Mechanical Specifications 3.9 . Processor Land Coordinates Figure 9 shows the top view of the processor land coordinates. The coordinates are referred to throughout the document to identify processor lands. Figure 9. Processor Land Coordinates and Quadrants (Top View) VCC / VSS 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 AN AM AL AK AJ AH AG AF AE AD AC AB AA Y W V U T R P N M L K J H G F E D C B A Socket 775 Quadrants Top View AN AM AL AK AJ AH AG AF AE AD AC AB AA Y W V U T R P N M L K J H G F E D C B A Address/ Common Clock/ Async 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 VTT / Clocks Data §§ Datasheet 39 Package Mechanical Specifications 40 Datasheet Land Listing and Signal Descriptions 4 Land Listing and Signal Descriptions This chapter provides the processor land assignment and signal descriptions. 4.1 Processor Land Assignments This section contains the land listings for the processor. The land-out footprint is shown in Figure 10 and Figure 11. These figures represent the land-out arranged by land number and they show the physical location of each signal on the package land array (top view). Table 23 is a listing of all processor lands ordered alphabetically by land (signal) name. Table 24 is also a listing of all processor lands; the ordering is by land number. Datasheet 41 Land Listing and Signal Descriptions Figure 10.land-out Diagram (Top View – Left Side) 30 AN VCC VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC 29 VCC VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC 28 VSS VSS VSS VSS VSS VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC 27 VSS VSS VSS VSS VSS VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC 26 VCC VCC VCC VCC VCC VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC 25 VCC VCC VCC VCC VCC VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC 24 VSS VSS VSS VSS VSS VSS VSS VSS VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC 23 VSS VSS VSS VSS VSS VSS VSS VSS VCC VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VCC VCC VCC VCC VCC DP3# DP0# VCC 22 VCC VCC VCC VCC VCC VCC VCC VCC VCC 21 VCC VCC VCC VCC VCC VCC VCC VCC VCC 20 VSS VSS VSS VSS VSS VSS VSS VSS VSS 19 VCC VCC VCC VCC VCC VCC VCC VCC VCC 18 VCC VCC VCC VCC VCC VCC VCC VCC VCC 17 VSS VSS VSS VSS VSS VSS VSS VSS VSS 16 VSS VSS VSS VSS VSS VSS VSS VSS VSS 15 VCC VCC VCC VCC VCC VCC VCC VCC VCC AM AL AK AJ AH AG AF AE AD AC AB AA Y W V U T R P N M L K J H BSEL1 BSEL2 FC15 BSEL0 RSVD VSS VSS BCLK1 VSS VSS VSS VSS VSS VSS D47# VSS D45# D46# VSS D63# D62# 22 VSS D44# D43# D42# VSS D58# D59# VSS 21 VSS VSS VSS D35# D38# D39# VSS D54# D57# VSS 18 VSS D36# D37# VSS D49# DSTBP3# VSS D56# 17 DP2# D32# VSS D34# RSVD VSS D55# DSTBN3# 16 DP1# D31# D30# D33# VSS D51# D53# VSS 15 G F E D C B A TESTHI4 TESTHI5 TESTHI3 TESTHI6 RESET# RSVD RSVD RSVD VCCIO PLL VSSA VCCA 23 DSTBN2# DSTBP2# D41# VSS D48# DBI3# VSS RSVD 20 VSS D40# DBI2# VSS D60# D61# 19 BCLK0 VTT_SEL TESTHI0 TESTHI2 TESTHI7 VSS VTT VTT VTT VTT 28 VSS VTT VTT VTT VTT 27 VSS VTT VTT VTT VTT 26 VSS VTT VTT VTT VTT 25 FC17 VSS VSS VSS VSS 24 VTT VTT VTT VTT 30 VTT VTT VTT VTT 29 42 Datasheet Land Listing and Signal Descriptions Figure 11.land-out Diagram (Top View – Right Side) 14 VCC VCC VCC VCC VCC VCC VCC VCC VCC 13 VSS VSS VSS VSS VSS VSS VSS VSS VSS 12 VCC VCC VCC VCC VCC VCC VCC VCC VCC 11 VCC VCC VCC VCC VCC VCC VCC VCC VCC 10 VSS VSS VSS VSS VSS VSS VSS VSS VSS 9 VCC VCC VCC VCC VCC VCC VCC VCC VCC 8 VCC VCC VCC VCC VCC VCC VCC VCC SKTOCC# VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VSS D29# D28# VSS RSVD D52# VSS D50# 14 VCC VSS D27# VSS D26# D25# VSS RSVD COMP0 13 VCC VSS DSTBN1# D24# DSTBP1# VSS D14# D13# VSS 12 VCC VSS DBI1# D23# VSS D15# D11# VSS D9# 11 VCC VSS RSVD VSS D21# D22# VSS D10# D8# 10 VCC VSS D16# D18# D19# VSS RSVD DSTBP0# VSS 9 VCC VSS BPRI# D17# VSS D12# DSTBN0# VSS DBI0# 8 7 FC16 FC12 VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS DEFER# VSS RSVD D20# VSS D6# D7# 7 6 5 4 VSS_ SENSE VSS VID5 VID4 VSS A32# A30# A28# RSVD VSS RSVD A26# A21# A20# VSS A15# A13# A11# A8# VSS RSVD A7# A6# REQ0# VSS RSP# TESTHI9 VSS HITM# HIT# VSS D0# D2# 4 3 VCC_ SENSE VID2 VSS ITP_CLK0 ITP_CLK1 VSS BPM5# VSS RSVD BINIT# VSS MCERR# VSS RSVD TESTHI1 VSS AP1# VSS FERR#/ PBE# INIT# VSS STPCLK# VSS A20M# RSVD VSS TESTHI8 BR0# TRDY# VSS LOCK# RS0# RS2# 3 2 VSS VID0 1 VSS VSS AN AM AL AK AJ AH AG AF AE AD AC AB AA Y W V U T R P N M L K J H VSS_MB_ VCC_MB_ REGULATION REGULATION VTTPWRGD VID3 FC8 A35# VSS A29# VSS RSVD A22# VSS A17# VSS A19# A18# VSS A10# VSS ADSTB0# A4# VSS REQ2# VSS REQ3# REQ4# VSS RSVD IMPSEL RSVD VSS D3# D5# VSS 6 FC11 VID1 VSS A34# A33# A31# A27# VSS ADSTB1# A25# A24# A23# VSS A16# A14# A12# A9# VSS RSVD RSVD A5# A3# VSS REQ1# TESTHI10 FC7 RS1# RSVD VSS D1# VSS D4# 5 PROCHOT# THERMDA VSS BPM0# RSVD BPM3# BPM4# VSS BPM2# DBR# IERR# LL_ID1 VSS TESTHI12 LL_ID0 AP0# COMP5 VSS SMI# IGNNE# THERMTRI P# TESTHI13 VSS COMP4 GTLREF1 FC1 FC5 VSS ADS# BNR# DBSY# VSS 2 1 RSVD DRDY# VSS THERMDC BPM1# VSS TRST# TDO TCK TDI TMS VSS VTT_OUT_ RIGHT BOOT SELECT MSID0 MSID1 VSS COMP1 FC2 TESTHI11 PWRGOOD VSS LINT1 LINT0 VTT_OUT_ LEFT GTLREF0 VSS G F E D C B A Datasheet 43 Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name A3# A4# A5# A6# A7# A8# A9# A10# A11# A12# A13# A14# A15# A16# A17# A18# A19# A20# A20M# A21# A22# A23# A24# A25# A26# A27# A28# A29# A30# A31# A32# A33# A34# A35# ADS# ADSTB0# ADSTB1# AP0# AP1# Land Signal Buffer # Type L5 P6 M5 L4 M4 R4 T5 U6 T4 U5 U4 V5 V4 W5 AB6 W6 Y6 Y4 K3 AA4 AD6 AA5 AB5 AC5 AB4 AF5 AF4 AG6 AG4 AG5 AH4 AH5 AJ5 AJ6 D2 R6 AD5 U2 U3 Direction Table 23.Alphabetical Land Assignments Land Name BCLK0 BCLK1 BINIT# BNR# BOOTSELECT BPM0# BPM1# BPM2# BPM3# BPM4# BPM5# BPRI# BR0# BSEL0 BSEL1 BSEL2 COMP0 COMP1 COMP4 COMP5 D0# D1# D2# D3# D4# D5# D6# D7# D8# D9# D10# D11# D12# D13# D14# D15# D16# D17# D18# Land Signal Buffer # Type F28 G28 AD3 C2 Y1 AJ2 AJ1 AD2 AG2 AF2 AG3 G8 F3 G29 H30 G30 A13 T1 J2 T2 B4 C5 A4 C6 A5 B6 B7 A7 A10 A11 B10 C11 D8 B12 C12 D11 G9 F8 F9 Clock Clock Direction Input Input Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Asynch GTL+ Input Common Clock Input/Output Common Clock Input/Output Power/Other Input Common Clock Input/Output Common Clock Input/Output Common Clock Input/Output Common Clock Input/Output Common Clock Input/Output Common Clock Input/Output Common Clock Input Common Clock Input/Output Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Output Output Output Input Input Input Input Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Common Clock Input/Output Source Synch Input/Output Source Synch Input/Output Common Clock Input/Output Common Clock Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output 44 Datasheet Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name D19# D20# D21# D22# D23# D24# D25# D26# D27# D28# D29# D30# D31# D32# D33# D34# D35# D36# D37# D38# D39# D40# D41# D42# D43# D44# D45# D46# D47# D48# D49# D50# D51# D52# D53# D54# D55# D56# D57# Land Signal Buffer # Type E9 D7 E10 D10 F11 F12 D13 E13 G13 F14 G14 F15 G15 G16 E15 E16 G18 G17 F17 F18 E18 E19 F20 E21 F21 G21 E22 D22 G22 D20 D17 A14 C15 C14 B15 C18 B16 A17 B18 Direction Table 23.Alphabetical Land Assignments Land Name D58# D59# D60# D61# D62# D63# DBI0# DBI1# DBI2# DBI3# DBR# DBSY# DEFER# DP0# DP1# DP2# DP3# DRDY# DSTBN0# DSTBN1# DSTBN2# DSTBN3# DSTBP0# DSTBP1# DSTBP2# DSTBP3# FC1 FC2 FC5 FC7 FC8 FC11 FC12 FC15 FC16 FC17 FERR#/PBE# GTLREF0 GTLREF1 Land Signal Buffer # Type C21 B21 B19 A19 A22 B22 A8 G11 D19 C20 AC2 B2 G7 J16 H15 H16 J17 C1 C8 G12 G20 A16 B9 E12 G19 C17 G2 R1 F2 G5 AK6 AM5 AM7 H29 AN7 E24 R3 H1 H2 Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Power/Other Power/Other Output Output Output Output Output Output Input Input Direction Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Power/Other Output Common Clock Input/Output Common Clock Input Common Clock Input/Output Common Clock Input/Output Common Clock Input/Output Common Clock Input/Output Common Clock Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Power/Other Power/Other Common Clock Source Synch Input Input Input Output Datasheet 45 Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name HIT# HITM# IERR# IGNNE# IMPSEL INIT# ITP_CLK0 ITP_CLK1 LINT0 LINT1 LL_ID0 LL_ID1 LOCK# MCERR# MSID0 MSID1 PROCHOT# PWRGOOD REQ0# REQ1# REQ2# REQ3# REQ4# RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED Land Signal Buffer # Type D4 E4 AB2 N2 F6 P3 AK3 AJ3 K1 L1 V2 AA2 C3 AB3 W1 V1 AL2 N1 K4 J5 M6 K6 J6 B13 A20 AC4 AE3 AE4 AE6 AH2 C9 D1 D14 D16 D23 E23 E5 E6 E7 Direction Table 23.Alphabetical Land Assignments Land Name RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESET# RS0# RS1# RS2# RSP# SKTOCC# SMI# STPCLK# TCK TDI TDO TESTHI0 TESTHI1 TESTHI2 TESTHI3 TESTHI4 TESTHI5 TESTHI6 TESTHI7 TESTHI8 TESTHI9 TESTHI10 TESTHI11 TESTHI12 TESTHI13 THERMDA THERMDC THERMTRIP# TMS TRDY# Land Signal Buffer # Type F23 F29 G10 G6 J3 N4 N5 P5 Y3 G23 B3 F5 A3 H4 AE8 P2 M3 AE1 AD1 AF1 F26 W3 F25 G25 G27 G26 G24 F24 G3 G4 H5 P1 W2 L2 AL1 AK1 M2 AC1 E3 Common Clock Common Clock Common Clock Common Clock Common Clock Power/Other Asynch GTL+ Asynch GTL+ TAP TAP TAP Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Power/Other Power/Other Asynch GTL+ TAP Common Clock Output Input Input Input Input Input Input Input Output Input Input Input Input Output Input Input Input Input Input Input Input Input Input Input Input Input Input Input Direction Common Clock Input/Output Common Clock Input/Output Asynch GTL+ Asynch GTL+ Power/Other Asynch GTL+ TAP TAP Asynch GTL+ Asynch GTL+ Power/Other Power/Other Output Input Input Input Input Input Input Input Output Output Common Clock Input/Output Common Clock Input/Output Power/Other Power/Other Output Output Asynch GTL+ Input/Output Power/Other Input Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output Source Synch Input/Output 46 Datasheet Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name TRST# VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC Land Signal Buffer # Type AG1 AA8 AB8 AC23 AC24 AC25 AC26 AC27 AC28 AC29 AC30 AC8 AD23 AD24 AD25 AD26 AD27 AD28 AD29 AD30 AD8 AE11 AE12 AE14 AE15 AE18 AE19 AE21 AE22 AE23 AE9 AF11 AF12 AF14 AF15 AF18 AF19 AF21 AF22 TAP Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Input Table 23.Alphabetical Land Assignments Land Name VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC Land Signal Buffer # Type AF8 AF9 AG11 AG12 AG14 AG15 AG18 AG19 AG21 AG22 AG25 AG26 AG27 AG28 AG29 AG30 AG8 AG9 AH11 AH12 AH14 AH15 AH18 AH19 AH21 AH22 AH25 AH26 AH27 AH28 AH29 AH30 AH8 AH9 AJ11 AJ12 AJ14 AJ15 AJ18 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Datasheet 47 Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC Land Signal Buffer # Type AJ19 AJ21 AJ22 AJ25 AJ26 AJ8 AJ9 AK11 AK12 AK14 AK15 AK18 AK19 AK21 AK22 AK25 AK26 AK8 AK9 AL11 AL12 AL14 AL15 AL18 AL19 AL21 AL22 AL25 AL26 AL29 AL30 AL8 AL9 AM11 AM12 AM14 AM15 AM18 AM19 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Table 23.Alphabetical Land Assignments Land Name VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC Land Signal Buffer # Type AM21 AM22 AM25 AM26 AM29 AM30 AM8 AM9 AN11 AN12 AN14 AN15 AN18 AN19 AN21 AN22 AN25 AN26 AN29 AN30 AN8 AN9 J10 J11 J12 J13 J14 J15 J18 J19 J20 J21 J22 J23 J24 J25 J26 J27 J28 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction 48 Datasheet Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC Land Signal Buffer # Type J29 J30 J8 J9 K23 K24 K25 K26 K27 K28 K29 K30 K8 L8 M23 M24 M25 M26 M27 M28 M29 M30 M8 N23 N24 N25 N26 N27 N28 N29 N30 N8 P8 R8 T23 T24 T25 T26 T27 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Table 23.Alphabetical Land Assignments Land Name VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC_MB_ REGULATION VCC_SENSE VCCA VCCIOPLL VID0 VID1 VID2 Land Signal Buffer # Type T28 T29 T30 T8 U23 U24 U25 U26 U27 U28 U29 U30 U8 V8 W23 W24 W25 W26 W27 W28 W29 W30 W8 Y23 Y24 Y25 Y26 Y27 Y28 Y29 Y30 Y8 AN5 AN3 A23 C23 AM2 AL5 AM3 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Output Output Output Output Output Direction Datasheet 49 Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name VID3 VID4 VID5 VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS Land Signal Buffer # Type AL6 AK4 AL4 B1 B11 B14 B17 B20 B24 B5 B8 A12 A15 A18 A2 A21 A24 A6 A9 AA23 AA24 AA25 AA26 AA27 AA28 AA29 AA3 AA30 AA6 AA7 AB1 AB23 AB24 AB25 AB26 AB27 AB28 AB29 AB30 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Output Output Output Table 23.Alphabetical Land Assignments Land Name VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS Land Signal Buffer # Type AB7 AC3 AC6 AC7 AD4 AD7 AE10 AE13 AE16 AE17 AE2 AE20 AE24 AE25 AE26 AE27 AE28 AE29 AE30 AE5 AE7 AF10 AF13 AF16 AF17 AF20 AF23 AF24 AF25 AF26 AF27 AF28 AF29 AF3 AF30 AF6 AF7 AG10 AG13 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction 50 Datasheet Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS Land Signal Buffer # Type AG16 AG17 AG20 AG23 AG24 AG7 AH1 AH10 AH13 AH16 AH17 AH20 AH23 AH24 AH3 AH6 AH7 AJ10 AJ13 AJ16 AJ17 AJ20 AJ23 AJ24 AJ27 AJ28 AJ29 AJ30 AJ4 AJ7 AK10 AK13 AK16 AK17 AK2 AK20 AK23 AK24 AK27 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Table 23.Alphabetical Land Assignments Land Name VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS Land Signal Buffer # Type AK28 AK29 AK30 AK5 AK7 AL10 AL13 AL16 AL17 AL20 AL23 AL24 AL27 AL28 AL3 AL7 AM1 AM10 AM13 AM16 AM17 AM20 AM23 AM24 AM27 AM28 AM4 AN1 AN10 AN13 AN16 AN17 AN2 AN20 AN23 AN24 AN27 AN28 C10 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Datasheet 51 Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS Land Signal Buffer # Type C13 C16 C19 C22 C24 C4 C7 D12 D15 D18 D21 D24 D3 D5 D6 D9 E11 E14 E17 E2 E20 E25 E26 E27 E28 E29 E8 F10 F13 F16 F19 F22 F4 F7 G1 H10 H11 H12 H13 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Table 23.Alphabetical Land Assignments Land Name VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS Land Signal Buffer # Type H14 H17 H18 H19 H20 H21 H22 H23 H24 H25 H26 H27 H28 H3 H6 H7 H8 H9 J4 J7 K2 K5 K7 L23 L24 L25 L26 L27 L28 L29 L3 L30 L6 L7 M1 M7 N3 N6 N7 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction 52 Datasheet Land Listing and Signal Descriptions Table 23.Alphabetical Land Assignments Land Name VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS Land Signal Buffer # Type P23 P24 P25 P26 P27 P28 P29 P30 P4 P7 R2 R23 R24 R25 R26 R27 R28 R29 R30 R5 R7 T3 T6 T7 U1 U7 V23 V24 V25 V26 V27 V28 V29 V3 V30 V6 V7 W4 W7 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Table 23.Alphabetical Land Assignments Land Name VSS VSS VSS VSS_MB_ REGULATION VSS_SENSE VSSA VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT VTT_OUT_LEFT VTT_OUT_ RIGHT VTT_SEL VTTPWRGD Land Signal Buffer # Type Y2 Y5 Y7 AN6 AN4 B23 B25 B26 B27 B28 B29 B30 A25 A26 A27 A28 A29 A30 C25 C26 C27 C28 C29 C30 D25 D26 D27 D28 D29 D30 J1 AA1 F27 AM6 Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Output Output Output Input Output Output Direction Datasheet 53 Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 Land Name VSS RS2# D2# D4# VSS D7# DBI0# VSS D8# D9# VSS COMP0 D50# VSS DSTBN3# D56# VSS D61# RESERVED VSS D62# VCCA VSS VTT VTT VTT VTT VTT VTT VSS DBSY# RS0# D0# VSS D5# D6# VSS DSTBP0# D10# VSS Power/Other Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Common Clock Input/Output Common Clock Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Input/Output Input/Output Input/Output Input/Output Input Input/Output Input/Output Signal Buffer Type Power/Other Common Clock Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Power/Other Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Input/Output Input/Output Input/Output Input Input/Output Input/Output Input/Output Input/Output Input/Output Input Input/Output Input/Output Direction Table 24.Numerical Land Assignment Land # B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 Land Name D13# RESERVED VSS D53# D55# VSS D57# D60# VSS D59# D63# VSSA VSS VTT VTT VTT VTT VTT VTT DRDY# BNR# LOCK# VSS D1# D3# VSS DSTBN0# RESERVED VSS D11# D14# VSS D52# D51# VSS DSTBP3# D54# VSS DBI3# D58# Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Common Clock Input/Output Common Clock Input/Output Common Clock Input/Output Power/Other Source Synch Source Synch Power/Other Source Synch Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Signal Buffer Type Source Synch Direction Input/Output 54 Datasheet Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # C22 C23 C24 C25 C26 C27 C28 C29 C30 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 E2 Land Name VSS VCCIOPLL VSS VTT VTT VTT VTT VTT VTT RESERVED ADS# VSS HIT# VSS VSS D20# D12# VSS D22# D15# VSS D25# RESERVED VSS RESERVED D49# VSS DBI2# D48# VSS D46# RESERVED VSS VTT VTT VTT VTT VTT VTT VSS Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Input/Output Input/Output Input/Output Input/Output Power/Other Common Clock Input/Output Power/Other Common Clock Input/Output Power/Other Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Input/Output Input/Output Input/Output Input/Output Input/Output Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Table 24.Numerical Land Assignment Land # E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E21 E22 E23 E24 E25 E26 E27 E28 E29 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 Land Name TRDY# HITM# RESERVED RESERVED RESERVED VSS D19# D21# VSS DSTBP1# D26# VSS D33# D34# VSS D39# D40# VSS D42# D45# RESERVED FC17 VSS VSS VSS VSS VSS FC5 BR0# VSS RS1# IMPSEL VSS D17# D18# VSS D23# D24# VSS D28# Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Common Clock Input Output Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Signal Buffer Type Common Clock Direction Input Common Clock Input/Output Common Clock Input/Output Power/Other Common Clock Power/Other Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Input/Output Input/Output Input/Output Input/Output Input/Output Input Input Datasheet 55 Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # F15 F16 F17 F18 F19 F20 F21 F22 F23 F24 F25 F26 F27 F28 F29 G1 G2 G3 G4 G5 G6 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G18 G19 G20 G21 G22 G23 G24 G25 Land Name D30# VSS D37# D38# VSS D41# D43# VSS RESERVED TESTHI7 TESTHI2 TESTHI0 VTT_SEL BCLK0 RESERVED VSS FC1 TESTHI8 TESTHI9 FC7 RESERVED DEFER# BPRI# D16# RESERVED DBI1# DSTBN1# D27# D29# D31# D32# D36# D35# DSTBP2# DSTBN2# D44# D47# RESET# TESTHI6 TESTHI3 Source Synch Source Synch Source Synch Source Synch Source Synch Source Synch Source Synch Source Synch Source Synch Source Synch Source Synch Source Synch Common Clock Power/Other Power/Other Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input Input Input Common Clock Common Clock Source Synch Input Input Input/Output Power/Other Power/Other Power/Other Power/Other Source Synch Input Input Input Output Power/Other Power/Other Power/Other Power/Other Clock Input Input Input Output Input Signal Buffer Type Source Synch Power/Other Source Synch Source Synch Power/Other Source Synch Source Synch Power/Other Input/Output Input/Output Input/Output Input/Output Direction Input/Output Table 24.Numerical Land Assignment Land # G26 G27 G28 G29 G30 H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H18 H19 H20 H21 H22 H23 H24 H25 H26 H27 H28 H29 H30 J1 J2 J3 J4 J5 Land Name TESTHI5 TESTHI4 BCLK1 BSEL0 BSEL2 GTLREF0 GTLREF1 VSS RSP# TESTHI10 VSS VSS VSS VSS VSS VSS VSS VSS VSS DP1# DP2# VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS FC15 BSEL1 VTT_OUT_LEFT COMP4 RESERVED VSS REQ1# Power/Other Source Synch Input/Output Signal Buffer Type Power/Other Power/Other Clock Power/Other Power/Other Power/Other Power/Other Power/Other Common Clock Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Common Clock Input/Output Common Clock Input/Output Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Output Output Output Input Input Input Direction Input Input Input Output Output Input Input 56 Datasheet Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # J6 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J18 J19 J20 J21 J22 J23 J24 J25 J26 J27 J28 J29 J30 K1 K2 K3 K4 K5 K6 K7 K8 K23 K24 K25 K26 K27 K28 K29 Land Name REQ4# VSS VCC VCC VCC VCC VCC VCC VCC VCC DP0# DP3# VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC VCC LINT0 VSS A20M# REQ0# VSS REQ3# VSS VCC VCC VCC VCC VCC VCC VCC VCC Signal Buffer Type Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Common Clock Input/Output Common Clock Input/Output Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Power/Other Asynch GTL+ Source Synch Power/Other Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Input/Output Input Input/Output Input Direction Input/Output Table 24.Numerical Land Assignment Land # K30 L1 L2 L3 L4 L5 L6 L7 L8 L23 L24 L25 L26 L27 L28 L29 L30 M1 M2 M3 M4 M5 M6 M7 M8 M23 M24 M25 M26 M27 M28 M29 M30 N1 N2 N3 N4 N5 N6 N7 Land Name VCC LINT1 TESTHI13 VSS A6# A3# VSS VSS VCC VSS VSS VSS VSS VSS VSS VSS VSS VSS THERMTRIP# STPCLK# A7# A5# REQ2# VSS VCC VCC VCC VCC VCC VCC VCC VCC VCC PWRGOOD IGNNE# VSS RESERVED RESERVED VSS VSS Power/Other Power/Other Signal Buffer Type Power/Other Asynch GTL+ Asynch GTL+ Power/Other Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Asynch GTL+ Source Synch Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Power/Other Input Input Output Input Input/Output Input/Output Input/Output Input/Output Input/Output Input Input Direction Datasheet 57 Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # N8 N23 N24 N25 N26 N27 N28 N29 N30 P1 P2 P3 P4 P5 P6 P7 P8 P23 P24 P25 P26 P27 P28 P29 P30 R1 R2 R3 R4 R5 R6 R7 R8 R23 R24 R25 R26 R27 R28 R29 Land Name VCC VCC VCC VCC VCC VCC VCC VCC VCC TESTHI11 SMI# INIT# VSS RESERVED A4# VSS VCC VSS VSS VSS VSS VSS VSS VSS VSS FC2 VSS FERR#/PBE# A8# VSS ADSTB0# VSS VCC VSS VSS VSS VSS VSS VSS VSS Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Source Synch Power/Other Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Input/Output Output Input/Output Input Input/Output Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Asynch GTL+ Power/Other Input Input Input Direction Table 24.Numerical Land Assignment Land # R30 T1 T2 T3 T4 T5 T6 T7 T8 T23 T24 T25 T26 T27 T28 T29 T30 U1 U2 U3 U4 U5 U6 U7 U8 U23 U24 U25 U26 U27 U28 U29 U30 V1 V2 V3 V4 V5 V6 V7 Land Name VSS COMP1 COMP5 VSS A11# A9# VSS VSS VCC VCC VCC VCC VCC VCC VCC VCC VCC VSS AP0# AP1# A13# A12# A10# VSS VCC VCC VCC VCC VCC VCC VCC VCC VCC MSID1 LL_ID0 VSS A15# A14# VSS VSS Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Common Clock Input/Output Common Clock Input/Output Source Synch Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Source Synch Source Synch Power/Other Power/Other Input/Output Input/Output Output Output Input/Output Input/Output Input/Output Input/Output Input/Output Input Input Direction 58 Datasheet Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # V8 V23 V24 V25 V26 V27 V28 V29 V30 W1 W2 W3 W4 W5 W6 W7 W8 W23 W24 W25 W26 W27 W28 W29 W30 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y23 Y24 Y25 Y26 Y27 Y28 Y29 Land Name VCC VSS VSS VSS VSS VSS VSS VSS VSS MSID0 TESTHI12 TESTHI1 VSS A16# A18# VSS VCC VCC VCC VCC VCC VCC VCC VCC VCC BOOTSELECT VSS RESERVED A20# VSS A19# VSS VCC VCC VCC VCC VCC VCC VCC VCC Source Synch Power/Other Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Input/Output Input/Output Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Input Input/Output Input/Output Output Input Input Direction Table 24.Numerical Land Assignment Land # Y30 AA1 AA2 AA3 AA4 AA5 AA6 AA7 AA8 AA23 AA24 AA25 AA26 AA27 AA28 AA29 AA30 AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB23 AB24 AB25 AB26 AB27 AB28 AB29 AB30 AC1 AC2 AC3 AC4 AC5 AC6 Land Name VCC VTT_OUT_RIG HT LL_ID1 VSS A21# A23# VSS VSS VCC VSS VSS VSS VSS VSS VSS VSS VSS VSS IERR# MCERR# A26# A24# A17# VSS VCC VSS VSS VSS VSS VSS VSS VSS VSS TMS DBR# VSS RESERVED A25# VSS Source Synch Power/Other Input/Output Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Output Input/Output Input/Output Output Output Direction Common Clock Input/Output Source Synch Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other TAP Power/Other Power/Other Input Output Input/Output Input/Output Input/Output Datasheet 59 Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # AC7 AC8 AC23 AC24 AC25 AC26 AC27 AC28 AC29 AC30 AD1 AD2 AD3 AD4 AD5 AD6 AD7 AD8 AD23 AD24 AD25 AD26 AD27 AD28 AD29 AD30 AE1 AE2 AE3 AE4 AE5 AE6 AE7 AE8 AE9 AE10 AE11 AE12 AE13 AE14 Land Name VSS VCC VCC VCC VCC VCC VCC VCC VCC VCC TDI BPM2# BINIT# VSS ADSTB1# A22# VSS VCC VCC VCC VCC VCC VCC VCC VCC VCC TCK VSS RESERVED RESERVED VSS RESERVED VSS SKTOCC# VCC VSS VCC VCC VSS VCC Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Output Power/Other Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other TAP Input Direction Table 24.Numerical Land Assignment Land # AE15 AE16 AE17 AE18 AE19 AE20 AE21 AE22 AE23 AE24 AE25 AE26 AE27 AE28 Land Name VCC VSS VSS VCC VCC VSS VCC VCC VCC VSS VSS VSS VSS VSS VSS VSS TDO BPM4# VSS A28# A27# VSS VSS VCC VCC VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other TAP Output Direction Common Clock Input/Output Common Clock Input/Output Power/Other Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other TAP Power/Other Input Input/Output Input/Output AE29 AE30 AF1 AF2 AF3 AF4 AF5 AF6 AF7 AF8 AF9 AF10 AF11 AF12 AF13 AF14 AF15 AF16 AF17 AF18 AF19 AF20 AF21 AF22 AF23 AF24 Common Clock Input/Output Power/Other Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Input/Output Input/Output 60 Datasheet Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # AF25 AF26 AF27 AF28 AF29 AF30 AG1 AG2 AG3 AG4 AG5 AG6 AG7 AG8 AG9 AG10 AG11 AG12 AG13 AG14 AG15 AG16 AG17 AG18 AG19 AG20 AG21 AG22 AG23 AG24 AG25 AG26 AG27 AG28 AG29 AG30 AH1 AH2 AH3 AH4 Land Name VSS VSS VSS VSS VSS VSS TRST# BPM3# BPM5# A30# A31# A29# VSS VCC VCC VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VCC VCC VCC VCC VSS RESERVED VSS A32# Power/Other Source Synch Input/Output Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other TAP Input Direction Table 24.Numerical Land Assignment Land # AH5 AH6 AH7 AH8 AH9 AH10 AH11 AH12 AH13 AH14 AH15 AH16 AH17 AH18 AH19 AH20 AH21 AH22 AH23 AH24 AH25 AH26 AH27 AH28 AH29 AH30 AJ1 AJ2 AJ3 AJ4 AJ5 AJ6 AJ7 AJ8 AJ9 AJ10 AJ11 AJ12 AJ13 AJ14 Land Name A33# VSS VSS VCC VCC VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VCC VCC VCC VCC BPM1# BPM0# ITP_CLK1 VSS A34# A35# VSS VCC VCC VSS VCC VCC VSS VCC Signal Buffer Type Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Common Clock Input/Output Common Clock Input/Output TAP Power/Other Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Input/Output Input/Output Input Direction Input/Output Common Clock Input/Output Common Clock Input/Output Source Synch Source Synch Source Synch Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Input/Output Input/Output Input/Output Datasheet 61 Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # AJ15 AJ16 AJ17 AJ18 AJ19 AJ20 AJ21 AJ22 AJ23 AJ24 AJ25 AJ26 AJ27 AJ28 AJ29 AJ30 AK1 AK2 AK3 AK4 AK5 AK6 AK7 AK8 AK9 AK10 AK11 AK12 AK13 AK14 AK15 AK16 AK17 AK18 AK19 AK20 AK21 AK22 AK23 AK24 Land Name VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VSS VSS VSS THERMDC VSS ITP_CLK0 VID4 VSS FC8 VSS VCC VCC VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other TAP Power/Other Power/Other Input Output Direction Table 24.Numerical Land Assignment Land # AK25 AK26 AK27 AK28 AK29 AK30 AL1 AL2 AL3 AL4 AL5 AL6 AL7 AL8 AL9 AL10 AL11 AL12 AL13 AL14 AL15 AL16 AL17 AL18 AL19 AL20 AL21 AL22 AL23 AL24 AL25 AL26 AL27 AL28 AL29 AL30 AM1 AM2 AM3 AM4 Land Name VCC VCC VSS VSS VSS VSS THERMDA PROCHOT# VSS VID5 VID1 VID3 VSS VCC VCC VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VID0 VID2 VSS Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Asynch GTL+ Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Output Output Output Output Output Input/Output Direction 62 Datasheet Land Listing and Signal Descriptions Table 24.Numerical Land Assignment Land # AM5 AM6 AM7 AM8 AM9 AM10 AM11 AM12 AM13 AM14 AM15 AM16 AM17 AM18 AM19 AM20 AM21 AM22 AM23 AM24 AM25 AM26 AM27 AM28 AM29 AM30 AN1 AN2 AN3 AN4 AN5 AN6 AN7 AN8 AN9 AN10 AN11 Land Name FC11 VTTPWRGD FC12 VCC VCC VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC VSS VSS VCC_SENSE VSS_SENSE VCC_MB_ REGULATION VSS_MB_ REGULATION FC16 VCC VCC VSS VCC Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Output Output Output Output Output Direction Output Input Output Table 24.Numerical Land Assignment Land # AN12 AN13 AN14 AN15 AN16 AN17 AN18 AN19 AN20 AN21 AN22 AN23 AN24 AN25 AN26 AN27 AN28 AN29 AN30 Land Name VCC VSS VCC VCC VSS VSS VCC VCC VSS VCC VCC VSS VSS VCC VCC VSS VSS VCC VCC Signal Buffer Type Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Power/Other Direction Datasheet 63 Land Listing and Signal Descriptions 4.2 Table 25. Alphabetical Signals Reference Signal Description (Sheet 1 of 9) Name Type Description A[35:3]# (Address) define a 236-byte physical memory address space. In sub-phase 1 of the address phase, these signals transmit the address of a transaction. In sub-phase 2, these signals transmit transaction type information. These signals must connect the appropriate pins/lands of all agents on the processor FSB. A[35:3]# are protected by parity signals AP[1:0]#. A[35:3]# are source synchronous signals and are latched into the receiving buffers by ADSTB[1:0]#. On the active-to-inactive transition of RESET#, the processor samples a subset of the A[35:3]# signals to determine power-on configuration. See Section 6.1 for more details. If A20M# (Address-20 Mask) is asserted, the processor masks physical address bit 20 (A20#) before looking up a line in any internal cache and before driving a read/write transaction on the bus. Asserting A20M# emulates the 8086 processor's address wraparound at the 1-MB boundary. Assertion of A20M# is only supported in real mode. A20M# is an asynchronous signal. However, to ensure recognition of this signal following an Input/Output write instruction, it must be valid along with the TRDY# assertion of the corresponding Input/ Output Write bus transaction. Input/ Output ADS# (Address Strobe) is asserted to indicate the validity of the transaction address on the A[35:3]# and REQ[4:0]# signals. All bus agents observe the ADS# activation to begin parity checking, protocol checking, address decode, internal snoop, or deferred reply ID match operations associated with the new transaction. Address strobes are used to latch A[35:3]# and REQ[4:0]# on their rising and falling edges. Strobes are associated with signals as shown below. ADSTB[1:0]# Input/ Output Signals REQ[4:0]#, A[16:3]# A[35:17]# Associated Strobe ADSTB0# ADSTB1# A[35:3]# Input/ Output A20M# Input ADS# AP[1:0]# Input/ Output AP[1:0]# (Address Parity) are driven by the request initiator along with ADS#, A[35:3]#, and the transaction type on the REQ[4:0]#. A correct parity signal is high if an even number of covered signals are low and low if an odd number of covered signals are low. This allows parity to be high when all the covered signals are high. AP[1:0]# should connect the appropriate pins/lands of all processor FSB agents. The following table defines the coverage model of these signals. Request Signals A[35:24]# A[23:3]# REQ[4:0]# Subphase 1 AP0# AP1# AP1# Subphase 2 AP1# AP0# AP0# 64 Datasheet Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name Type Description The differential pair BCLK (Bus Clock) determines the FSB frequency. All processor FSB agents must receive these signals to drive their outputs and latch their inputs. All external timing parameters are specified with respect to the rising edge of BCLK0 crossing VCROSS. BINIT# (Bus Initialization) may be observed and driven by all processor FSB agents and if used, must connect the appropriate pins/lands of all such agents. If the BINIT# driver is enabled during power-on configuration, BINIT# is asserted to signal any bus condition that prevents reliable future operation. Input/ Output If BINIT# observation is enabled during power-on configuration, and BINIT# is sampled asserted, symmetric agents reset their bus LOCK# activity and bus request arbitration state machines. The bus agents do not reset their IOQ and transaction tracking state machines upon observation of BINIT# activation. Once the BINIT# assertion has been observed, the bus agents will re-arbitrate for the FSB and attempt completion of their bus queue and IOQ entries. If BINIT# observation is disabled during power-on configuration, a central agent may handle an assertion of BINIT# as appropriate to the error handling architecture of the system. BNR# Input/ Output BNR# (Block Next Request) is used to assert a bus stall by any bus agent unable to accept new bus transactions. During a bus stall, the current bus owner cannot issue any new transactions. This input is required to determine whether the processor is installed in a platform that supports the Celeron D processor. The processor will not operate if this signal is low. This input has a weak internal pull-up to VTT. BPM[5:0]# (Breakpoint Monitor) are breakpoint and performance monitor signals. They are outputs from the processor which indicate the status of breakpoints and programmable counters used for monitoring processor performance. BPM[5:0]# should connect the appropriate pins/lands of all processor FSB agents. BPM[5:0]# Input/ Output BPM4# provides PRDY# (Probe Ready) functionality for the TAP port. PRDY# is a processor output used by debug tools to determine processor debug readiness. BPM5# provides PREQ# (Probe Request) functionality for the TAP port. PREQ# is used by debug tools to request debug operation of the processor. These signals do not have on-die termination. Refer to Section 2.5.2 for termination requirements. BPRI# (Bus Priority Request) is used to arbitrate for ownership of the processor FSB. It must connect the appropriate pins/lands of all processor FSB agents. Observing BPRI# active (as asserted by the priority agent) causes all other agents to stop issuing new requests, unless such requests are part of an ongoing locked operation. The priority agent keeps BPRI# asserted until all of its requests are completed, then releases the bus by de-asserting BPRI#. BR0# drives the BREQ0# signal in the system and is used by the processor to request the bus. During power-on configuration this signal is sampled to determine the agent ID = 0. This signal does not have on-die termination and must be terminated. BCLK[1:0] Input BINIT# BOOTSELECT Input BPRI# Input BR0# Input/ Output Datasheet 65 Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name Type Description The BCLK[1:0] frequency select signals BSEL[2:0] are used to select the processor input clock frequency. Table 18 defines the possible combinations of the signals and the frequency associated with each combination. The required frequency is determined by the processor, chipset and clock synthesizer. All agents must operate at the same frequency. For more information about these signals, including termination recommendations refer to Chapter 2. COMP[1:0] must be terminated to VSS on the system board using precision resistors. COMP[5:4] must be terminated to VTT on the system board using precision resistors. D[63:0]# (Data) are the data signals. These signals provide a 64-bit data path between the processor FSB agents, and must connect the appropriate pins/lands on all such agents. The data driver asserts DRDY# to indicate a valid data transfer. D[63:0]# are quad-pumped signals and will, thus, be driven four times in a common clock period. D[63:0]# are latched off the falling edge of both DSTBP[3:0]# and DSTBN[3:0]#. Each group of 16 data signals correspond to a pair of one DSTBP# and one DSTBN#. The following table shows the grouping of data signals to data strobes and DBI#. D[63:0]# Input/ Output Quad-Pumped Signal Groups Data Group D[15:0]# D[31:16]# D[47:32]# D[63:48]# DSTBN#/DSTBP# 0 1 2 3 DBI# 0 1 2 3 BSEL[2:0] Output COMP[5:4,1:0] Analog Furthermore, the DBI# signals determine the polarity of the data signals. Each group of 16 data signals corresponds to one DBI# signal. When the DBI# signal is active, the corresponding data group is inverted and therefore sampled active high. DBI[3:0]# (Data Bus Inversion) are source synchronous and indicate the polarity of the D[63:0]# signals.The DBI[3:0]# signals are activated when the data on the data bus is inverted. If more than half the data bits, within a 16-bit group, would have been asserted electrically low, the bus agent may invert the data bus signals for that particular sub-phase for that 16-bit group. DBI[3:0]# Input/ Output DBI[3:0] Assignment To Data Bus Bus Signal DBI3# DBI2# DBI1# DBI0# Data Bus Signals D[63:48]# D[47:32]# D[31:16]# D[15:0]# 66 Datasheet Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name Type Description DBR# (Debug Reset) is used only in processor systems where no debug port is implemented on the system board. DBR# is used by a debug port interposer so that an in-target probe can drive system reset. If a debug port is implemented in the system, DBR# is a no connect in the system. DBR# is not a processor signal. DBSY# (Data Bus Busy) is asserted by the agent responsible for driving data on the processor FSB to indicate that the data bus is in use. The data bus is released after DBSY# is de-asserted. This signal must connect the appropriate pins/lands on all processor FSB agents. DEFER# is asserted by an agent to indicate that a transaction cannot be ensured in-order completion. Assertion of DEFER# is normally the responsibility of the addressed memory or input/output agent. This signal must connect the appropriate pins/lands of all processor FSB agents. DP[3:0]# (Data parity) provide parity protection for the D[63:0]# signals. They are driven by the agent responsible for driving D[63:0]#, and must connect the appropriate pins/lands of all processor FSB agents. DRDY# (Data Ready) is asserted by the data driver on each data transfer, indicating valid data on the data bus. In a multi-common clock data transfer, DRDY# may be de-asserted to insert idle clocks. This signal must connect the appropriate pins/lands of all processor FSB agents. DSTBN[3:0]# are the data strobes used to latch in D[63:0]#. Signals DSTBN[3:0]# Input/ Output D[15:0]#, DBI0# D[31:16]#, DBI1# D[47:32]#, DBI2# D[63:48]#, DBI3# Associated Strobe DSTBN0# DSTBN1# DSTBN2# DSTBN3# DBR# Output DBSY# Input/ Output DEFER# Input DP[3:0]# Input/ Output DRDY# Input/ Output DSTBP[3:0]# are the data strobes used to latch in D[63:0]#. Signals DSTBP[3:0]# Input/ Output D[15:0]#, DBI0# D[31:16]#, DBI1# D[47:32]#, DBI2# D[63:48]#, DBI3# FCx Other Associated Strobe DSTBP0# DSTBP1# DSTBP2# DSTBP3# FC signals are signals that are available for compatibility with other processors. Datasheet 67 Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name Type Description FERR#/PBE# (floating point error/pending break event) is a multiplexed signal and its meaning is qualified by STPCLK#. When STPCLK# is not asserted, FERR#/PBE# indicates a floating-point error and will be asserted when the processor detects an unmasked floating-point error. When STPCLK# is not asserted, FERR#/PBE# is similar to the ERROR# signal on the Intel 387 coprocessor, and is included for compatibility with systems using MS-DOS*-type floating-point error reporting. When STPCLK# is asserted, an assertion of FERR#/PBE# indicates that the processor has a pending break event waiting for service. The assertion of FERR#/PBE# indicates that the processor should be returned to the Normal state. For additional information on the pending break event functionality, including the identification of support of the feature and enable/ disable information, refer to volume 3 of the Intel Architecture Software Developer's Manual and the Intel Processor Identification and the CPUID Instruction application note. GTLREF[1:0] determine the signal reference level for GTL+ input signals. GTLREF is used by the GTL+ receivers to determine if a signal is a logical 0 or logical 1. HIT# (Snoop Hit) and HITM# (Hit Modified) convey transaction snoop operation results. Any FSB agent may assert both HIT# and HITM# together to indicate that it requires a snoop stall, which can be continued by reasserting HIT# and HITM# together. IERR# (Internal Error) is asserted by a processor as the result of an internal error. Assertion of IERR# is usually accompanied by a SHUTDOWN transaction on the processor FSB. This transaction may optionally be converted to an external error signal (e.g., NMI) by system core logic. The processor will keep IERR# asserted until the assertion of RESET#. This signal does not have on-die termination. Refer to Section 2.5.2 for termination requirements. IGNNE# (Ignore Numeric Error) is asserted to the processor to ignore a numeric error and continue to execute noncontrol floatingpoint instructions. If IGNNE# is de-asserted, the processor generates an exception on a noncontrol floating-point instruction if a previous floating-point instruction caused an error. IGNNE# has no effect when the NE bit in control register 0 (CR0) is set. IGNNE# is an asynchronous signal. However, to ensure recognition of this signal following an Input/Output write instruction, it must be valid along with the TRDY# assertion of the corresponding Input/ Output Write bus transaction. IMPSEL Input IMPSEL input will determine whether the processor uses a 50 Ω or 60 Ω buffer. This pin/land must be tied to GND on 50 Ω platforms and left as NC on 60 Ω platforms. This input has a weak internal pull-up to VTT. FERR#/PBE# Output GTLREF[1:0] Input Input/ Output Input/ Output HIT# HITM# IERR# Output IGNNE# Input 68 Datasheet Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name Type Description INIT# (Initialization), when asserted, resets integer registers inside the processor without affecting its internal caches or floating-point registers. The processor then begins execution at the power-on Reset vector configured during power-on configuration. The processor continues to handle snoop requests during INIT# assertion. INIT# is an asynchronous signal and must connect the appropriate pins/lands of all processor FSB agents. If INIT# is sampled active on the active to inactive transition of RESET#, then the processor executes its Built-in Self-Test (BIST). ITP_CLK[1:0] are copies of BCLK that are used only in processor systems where no debug port is implemented on the system board. ITP_CLK[1:0] are used as BCLK[1:0] references for a debug port implemented on an interposer. If a debug port is implemented in the system, ITP_CLK[1:0] are no connects in the system. These are not processor signals. LINT[1:0] (Local APIC Interrupt) must connect the appropriate pins/ lands of all APIC Bus agents. When the APIC is disabled, the LINT0 signal becomes INTR, a maskable interrupt request signal, and LINT1 becomes NMI, a nonmaskable interrupt. INTR and NMI are backward compatible with the signals of those names on the Celeron D processor. Both signals are asynchronous. Both of these signals must be software configured via BIOS programming of the APIC register space to be used either as NMI/ INTR or LINT[1:0]. Because the APIC is enabled by default after Reset, operation of these signals as LINT[1:0] is the default configuration. LL_ID[1:0] Output The LL_ID[1:0] signals are used to select the correct loadline slope for the processor. LL_ID[1:0] = 00 for the Celeron D processor. LOCK# indicates to the system that a transaction must occur atomically. This signal must connect the appropriate pins/lands of all processor FSB agents. For a locked sequence of transactions, LOCK# is asserted from the beginning of the first transaction to the end of the last transaction. When the priority agent asserts BPRI# to arbitrate for ownership of the processor FSB, it will wait until it observes LOCK# de-asserted. This enables symmetric agents to retain ownership of the processor FSB throughout the bus locked operation and ensure the atomicity of lock. MCERR# (Machine Check Error) is asserted to indicate an unrecoverable error without a bus protocol violation. It may be driven by all processor FSB agents. MCERR# assertion conditions are configurable at a system level. Assertion options are defined by the following options: MCERR# Input/ Output • • • • Enabled or disabled. Asserted, if configured, for internal errors along with IERR#. Asserted, if configured, by the request initiator of a bus transaction after it observes an error. Asserted by any bus agent when it observes an error in a bus transaction. INIT# Input ITP_CLK[1:0] Input LINT[1:0] Input LOCK# Input/ Output For more details regarding machine check architecture, refer to the IA-32 Software Developer’s Manual, Volume 3: System Programming Guide. Datasheet 69 Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name Type Description MSID0 is used to indicate to the processor whether the platform supports 775_VR_CONFIG_05B processors. A 775_VR_CONFIG_05B processor will only boot if it’s MSID0 pin/land is electrically low. A 775_VR_CONFIG_05A processor will ignore this input. MSID1 must be electrically low for the processor to boot. As an output, PROCHOT# (Processor Hot) will go active when the processor temperature monitoring sensor detects that the processor has reached its maximum safe operating temperature. This indicates that the processor Thermal Control Circuit (TCC) has been activated, if enabled. As an input, assertion of PROCHOT# by the system will activate the TCC, if enabled. The TCC will remain active until the system de-asserts PROCHOT#. See Section 5.2.3 for more details. PWRGOOD (Power Good) is a processor input. The processor requires this signal to be a clean indication that the clocks and power supplies are stable and within their specifications. ‘Clean’ implies that the signal will remain low (capable of sinking leakage current), without glitches, from the time that the power supplies are turned on until they come within specification. The signal must then transition monotonically to a high state. PWRGOOD can be driven inactive at any time, but clocks and power must again be stable before a subsequent rising edge of PWRGOOD. The PWRGOOD signal must be supplied to the processor; it is used to protect internal circuits against voltage sequencing issues. It should be driven high throughout boundary scan operation. Input/ Output REQ[4:0]# (Request Command) must connect the appropriate pins/ lands of all processor FSB agents. They are asserted by the current bus owner to define the currently active transaction type. These signals are source synchronous to ADSTB0#. Refer to the AP[1:0]# signal description for a details on parity checking of these signals. Asserting the RESET# signal resets the processor to a known state and invalidates its internal caches without writing back any of their contents. For a power-on Reset, RESET# must stay active for at least one millisecond after VCC and BCLK have reached their proper specifications. On observing active RESET#, all FSB agents will deassert their outputs within two clocks. RESET# must not be kept asserted for more than 10 ms while PWRGOOD is asserted. A number of bus signals are sampled at the active-to-inactive transition of RESET# for power-on configuration. These configuration options are described in the Section 6.1. This signal does not have on-die termination and must be terminated on the system board. RS[2:0]# Input RS[2:0]# (Response Status) are driven by the response agent (the agent responsible for completion of the current transaction), and must connect the appropriate pins/lands of all processor FSB agents. MSID[1:0] Input PROCHOT# Input/ Output PWRGOOD Input REQ[4:0]# RESET# Input 70 Datasheet Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name Type Description RSP# (Response Parity) is driven by the response agent (the agent responsible for completion of the current transaction) during assertion of RS[2:0]#, the signals for which RSP# provides parity protection. It must connect to the appropriate pins/lands of all processor FSB agents. A correct parity signal is high if an even number of covered signals are low and low if an odd number of covered signals are low. While RS[2:0]# = 000, RSP# is also high, since this indicates it is not being driven by any agent ensuring correct parity. SKTOCC# Output SKTOCC# (Socket Occupied) will be pulled to ground by the processor. System board designers may use this signal to determine if the processor is present. SMI# (System Management Interrupt) is asserted asynchronously by system logic. On accepting a System Management Interrupt, the processor saves the current state and enter System Management Mode (SMM). An SMI Acknowledge transaction is issued, and the processor begins program execution from the SMM handler. If SMI# is asserted during the de-assertion of RESET#, the processor will tri-state its outputs. STPCLK# (Stop Clock), when asserted, causes the processor to enter a low power Stop-Grant state. The processor issues a StopGrant Acknowledge transaction, and stops providing internal clock signals to all processor core units except the FSB and APIC units. The processor continues to snoop bus transactions and service interrupts while in Stop-Grant state. When STPCLK# is de-asserted, the processor restarts its internal clock to all units and resumes execution. The assertion of STPCLK# has no effect on the bus clock; STPCLK# is an asynchronous input. TCK (Test Clock) provides the clock input for the processor Test Bus (also known as the Test Access Port). TDI (Test Data In) transfers serial test data into the processor. TDI provides the serial input needed for JTAG specification support. TDO (Test Data Out) transfers serial test data out of the processor. TDO provides the serial output needed for JTAG specification support. TESTHI[13:0] must be connected to the processor’s appropriate power source (refer to VTT_OUT_LEFT and VTT_OUT_RIGHT signal description) through a resistor for proper processor operation. See Section 2.4 for more details. Thermal Diode Anode. See Section 5.2.6. Thermal Diode Cathode. See Section 5.2.6. RSP# Input SMI# Input STPCLK# Input TCK TDI TDO Input Input Output TESTHI[13:0] THERMDA THERMDC Input Other Other Datasheet 71 Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name Type Description In the event of a catastrophic cooling failure, the processor will automatically shut down when the silicon has reached a temperature approximately 20 °C above the maximum TC. Assertion of THERMTRIP# (Thermal Trip) indicates the processor junction temperature has reached a level beyond where permanent silicon damage may occur. Upon assertion of THERMTRIP#, the processor will shut off its internal clocks (thus, halting program execution) in an attempt to reduce the processor junction temperature. To protect the processor, its core voltage (VCC) must be removed following the assertion of THERMTRIP#. Driving of the THERMTRIP# signal is enabled within 10 μs of the assertion of PWRGOOD and is disabled on de-assertion of PWRGOOD. Once activated, THERMTRIP# remains latched until PWRGOOD is de-asserted. While the deassertion of the PWRGOOD signal will de-assert THERMTRIP#, if the processor’s junction temperature remains at or above the trip level, THERMTRIP# will again be asserted within 10 μs of the assertion of PWRGOOD. TMS (Test Mode Select) is a JTAG specification support signal used by debug tools. TRDY# (Target Ready) is asserted by the target to indicate that it is ready to receive a write or implicit writeback data transfer. TRDY# must connect the appropriate pins/lands of all FSB agents. TRST# (Test Reset) resets the Test Access Port (TAP) logic. TRST# must be driven low during power on Reset. VCC are the power lands for the processor. The voltage supplied to these lands is determined by the VID[5:0] lands. VCCA provides isolated power for the internal processor core PLLs. VCCIOPLL provides isolated power for internal processor FSB PLLs. VCC_SENSE is an isolated low impedance connection to processor core power (VCC). It can be used to sense or measure voltage near the silicon with little noise. This land is provided as a voltage regulator feedback sense point for VCC. It is connected internally in the processor package to the sense point land U27 as described in the Voltage Regulator-Down (VRD) 10.1 Design Guide for Desktop Socket 775. VID[5:0] (Voltage ID) signals are used to support automatic selection of power supply voltages (VCC). Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide for Desktop Socket 775 for more information. The voltage supply for these signals must be valid before the VR can supply VCC to the processor. Conversely, the VR output must be disabled until the voltage supply for the VID signals becomes valid. The VID signals are needed to support the processor voltage specification variations. See Table 2 for definitions of these signals. The VR must supply the voltage that is requested by the signals, or disable itself. VSS are the ground lands for the processor and should be connected to the system ground plane. VSSA is the isolated ground for internal PLLs. VSS_SENSE is an isolated low impedance connection to processor core VSS. It can be used to sense or measure ground near the silicon with little noise. THERMTRIP# Output TMS TRDY# TRST# VCC VCCA VCCIOPLL VCC_SENSE Input Input Input Input Input Input Output VCC_MB_ REGULATION Output VID[5:0] Output VSS VSSA VSS_SENSE Input Input Output 72 Datasheet Land Listing and Signal Descriptions Table 25. Signal Description (Sheet 1 of 9) Name VSS_MB_ REGULATION VTT VTT_OUT_LEFT Output VTT_OUT_RIGHT VTT_SEL VTTPWRGD Output Input Type Description This land is provided as a voltage regulator feedback sense point for VSS. It is connected internally in the processor package to the sense point land V27 as described in the Voltage Regulator-Down (VRD) 10.1 Design Guide for Desktop Socket 775. Miscellaneous voltage supply. The VTT_OUT_LEFT and VTT_OUT_RIGHT signals are included to provide a voltage supply for some signals that require termination to VTT on the motherboard. The VTT_SEL signal is used to select the correct VTT voltage level for the processor. This land is connected internally in the package to VTT. The processor requires this input to determine that the VTT voltages are stable and within specification. Output §§ Datasheet 73 Land Listing and Signal Descriptions 74 Datasheet Thermal Specifications and Design Considerations 5 5.1 Thermal Specifications and Design Considerations Processor Thermal Specifications The Celeron D processor requires a thermal solution to maintain temperatures within the operating limits as set forth in Section 5.1.1. Any attempt to operate the processor outside these operating limits may result in permanent damage to the processor and potentially other components within the system. As processor technology changes, thermal management becomes increasingly crucial when building computer systems. Maintaining the proper thermal environment is key to reliable, long-term system operation. A complete thermal solution includes both component and system level thermal management features. Component level thermal solutions can include active or passive heatsinks attached to the processor Integrated Heat Spreader (IHS). Typical system level thermal solutions may consist of system fans combined with ducting and venting. For more information on designing a component level thermal solution, refer to the appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2) Note: The boxed processor will ship with a component thermal solution. Refer to Chapter 7 for details on the boxed processor. 5.1.1 Thermal Specifications To allow for the optimal operation and long-term reliability of Intel processor-based systems, the system/processor thermal solution should be designed such that the processor remains within the minimum and maximum case temperature (TC) specifications when operating at or below the Thermal Design Power (TDP) value listed per frequency in Table 26. Thermal solutions not designed to provide this level of thermal capability may affect the long-term reliability of the processor and system. For more details on thermal solution design, refer to the appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2). The Celeron D processor uses a methodology for managing processor temperatures which is intended to support acoustic noise reduction through fan speed control. Selection of the appropriate fan speed will be based on the temperature reported by the processor’s Thermal Diode. If the diode temperature is greater than or equal to TCONTROL then the processor case temperature must remain at or below the temperature as specified by the thermal profile. If the diode temperature is less than TCONTROL then the case temperature is permitted to exceed the thermal profile, but the diode temperature must remain at or below TCONTROL. Systems that implement fan speed control must be designed to take these conditions in to account. Systems that do not alter the fan speed only need to ensure the case temperature meets the thermal profile specifications. To determine a processor's case temperature specification based on the thermal profile, it is necessary to accurately measure processor power dissipation. Intel has developed a methodology for accurate power measurement that correlates to Intel test temperature and voltage conditions. Refer to the appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2) and the Processor Power Characterization Methodology for the details of this methodology. Datasheet 75 Thermal Specifications and Design Considerations The case temperature is defined at the geometric top center of the processor. Analysis indicates that real applications are unlikely to cause the processor to consume maximum power dissipation for sustained time periods. Intel recommends that complete thermal solution designs target the Thermal Design Power (TDP) indicated in Table 26 instead of the maximum processor power consumption. The Thermal Monitor feature is designed to protect the processor in the unlikely event that an application exceeds the TDP recommendation for a sustained periods of time. For more details on the usage of this feature, refer to Section 5.2. In all cases the Thermal Monitor Feature must be enabled for the processor to remain within specification. Table 26. Processor Thermal Specifications for 775_VR_CONFIG_05A Processors Processor Number 356 352 347 Core Frequency (GHz) 3.33 3.2 3.06 Thermal Design Power (W) 86 86 86 Minimum TC (°C) 5 5 5 See Table 28 and Figure 12 Maximum TC (°C) Notes 1, 2 1, 2 1, 2 1. Thermal Design Power (TDP) should be used for processor thermal solution design targets. The TDP is not the maximum power that the processor can dissipate. 2. This table shows the maximum TDP for a given frequency range. Individual processors may have a lower TDP. Therefore, the maximum TC will vary depending on the TDP of the individual processor. Refer to thermal profile figure and associated table for the allowed combinations of power and TC. NOTES: Table 27. Processor Thermal Specifications for 775_VR_CONFIG_06 Processors Processor Number 365 360 356 352 347 Core Frequency (GHz) 3.66 3.46 3.33 3.2 3.06 Thermal Design Power (W) 65 65 65 65 65 Minimum TC (°C) 5 5 5 5 5 See Table 29 and Figure 13 Maximum TC (°C) Notes 1, 2 1, 2 1, 2 1, 2 1, 2 NOTES: 1. 2. Thermal Design Power (TDP) should be used for processor thermal solution design targets. The TDP is not the maximum power that the processor can dissipate. This table shows the maximum TDP for a given frequency range. Individual processors may have a lower TDP. Therefore, the maximum TC will vary depending on the TDP of the individual processor. Refer to thermal profile figure and associated table for the allowed combinations of power and TC. 76 Datasheet Thermal Specifications and Design Considerations Table 28. Thermal Profile for 775_VR_CONFIG_05A Processors Power (W) 0 2 4 6 8 10 12 14 16 18 20 Maximum Tc (°C) 44.3 44.9 45.5 46.0 46.6 47.2 47.8 48.4 48.9 49.5 50.1 Power (W) 22 24 26 28 30 32 34 36 38 40 42 Maximum Tc (°C) 50.7 51.3 51.8 52.4 53.0 53.6 54.2 54.7 55.3 55.9 56.5 Power (W) 44 46 48 50 52 54 56 58 60 62 64 Maximum Tc (°C) 57.1 57.6 58.2 58.8 59.4 60.0 60.5 61.1 61.7 62.3 62.9 Power Maximum (W) Tc (°C) 66 68 70 72 74 76 78 80 82 84 86 63.4 64.0 64.6 65.2 65.8 66.3 66.9 67.5 68.1 68.7 69.2 Figure 12. Thermal Profile for 775_VR_CONFIG_05A Processors 70.0 65.0 y = 0.29x + 44.3 60.0 Tcase (C) 55.0 50.0 45.0 40.0 0 10 20 30 40 Power (W) 50 60 70 80 Datasheet 77 Thermal Specifications and Design Considerations Table 29. Thermal Profile for 775_VR_CONFIG_06 Processors Power (W) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Maximum Tc (°C) 43.6 44.2 44.9 45.5 46.2 46.8 47.4 48.1 48.7 49.4 50.0 50.6 51.3 51.9 52.6 53.2 53.8 Power (W) 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 65 Maximum Tc (°C) 54.5 55.1 55.8 56.4 57.0 57.7 58.3 59.0 59.6 60.2 60.9 61.5 62.2 62.8 63.4 64.1 64.4 Figure 13. Thermal Profile for 775_VR_CONFIG_06 Processors 70.0 y = 0.32x + 43.6 65.0 60.0 Tcase (C) 55.0 50.0 45.0 40.0 0 10 20 30 40 Power (W) 50 60 78 Datasheet Thermal Specifications and Design Considerations 5.1.2 Thermal Metrology The maximum and minimum case temperatures (TC) for the Celeron D processor is specified in Table 26. This temperature specification is meant to help ensure proper operation of the processor. Figure 14 illustrates where Intel recommends TC thermal measurements should be made. For detailed guidelines on temperature measurement methodology, refer to the appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2). Figure 14. Case Temperature (TC) Measurement Location Measure TC at this point (geometric center of the package) 37.5 mm 37.5 mm 5.2 5.2.1 Processor Thermal Features Thermal Monitor The Thermal Monitor feature helps control the processor temperature by activating the thermal control circuit (TCC) when the processor silicon reaches its maximum operating temperature. The TCC reduces processor power consumption by modulating (starting and stopping) the internal processor core clocks. The Thermal Monitor feature must be enabled for the processor to be operating within specifications. The temperature at which Thermal Monitor activates the thermal control circuit is not user configurable and is not software visible. Bus traffic is snooped in the normal manner, and interrupt requests are latched (and serviced during the time that the clocks are on) while the TCC is active. When the Thermal Monitor feature is enabled, and a high temperature situation exists (i.e., TCC is active), the clocks will be modulated by alternately turning the clocks off and on at a duty cycle specific to the processor (typically 30–50%). Clocks often will not be off for more than 3.0 microseconds when the TCC is active. Cycle times are processor speed dependent and will decrease as processor core frequencies increase. A small amount of hysteresis has been included to prevent rapid active/inactive transitions of the TCC when the processor temperature is near its maximum operating temperature. Once the temperature has dropped below the maximum operating temperature, and the hysteresis timer has expired, the TCC goes inactive and clock modulation ceases. With a properly designed and characterized thermal solution, it is anticipated that the TCC would only be activated for very short periods of time when running the most power intensive applications. The processor performance impact due to these brief Datasheet 79 Thermal Specifications and Design Considerations periods of TCC activation is expected to be so minor that it would be immeasurable. An under-designed thermal solution that is not able to prevent excessive activation of the TCC in the anticipated ambient environment may cause a noticeable performance loss, and in some cases may result in a TC that exceeds the specified maximum temperature and may affect the long-term reliability of the processor. In addition, a thermal solution that is significantly under-designed may not be capable of cooling the processor even when the TCC is active continuously. Refer to the appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2) for information on designing a thermal solution. The duty cycle for the TCC, when activated by the Thermal Monitor, is factory configured and cannot be modified. The Thermal Monitor does not require any additional hardware, software drivers, or interrupt handling routines. 5.2.2 On-Demand Mode The Celeron D processor provides an auxiliary mechanism that allows system software to force the processor to reduce its power consumption. This mechanism is referred to as “On-Demand” mode and is distinct from the Thermal Monitor feature. On-Demand mode is intended as a means to reduce system level power consumption. Systems using the Celeron D processor must not rely on software usage of this mechanism to limit the processor temperature. If bit 4 of the ACPI P_CNT Control Register (located in the processor IA32_THERM_CONTROL MSR) is written to a '1', the processor will immediately reduce its power consumption via modulation (starting and stopping) of the internal core clock, independent of the processor temperature. When using On-Demand mode, the duty cycle of the clock modulation is programmable via bits 3:1 of the same ACPI P_CNT Control Register. In On-Demand mode, the duty cycle can be programmed from 12.5% on/87.5% off, to 87.5% on/12.5% off in 12.5% increments. On-Demand mode may be used in conjunction with the Thermal Monitor. If the system tries to enable On-Demand mode at the same time the TCC is engaged, the factory configured duty cycle of the TCC will override the duty cycle selected by the On-Demand mode. 80 Datasheet Thermal Specifications and Design Considerations 5.2.3 PROCHOT# Signal An external signal, PROCHOT# (processor hot), is asserted when the processor die temperature has reached its maximum operating temperature. If the Thermal Monitor is enabled (note that the Thermal Monitor must be enabled for the processor to be operating within specification), the TCC will be active when PROCHOT# is asserted. The processor can be configured to generate an interrupt upon the assertion or deassertion of PROCHOT#. Refer to the Intel Architecture Software Developer's Manuals for specific register and programming details. The Celeron D processor implements a bi-directional PROCHOT# capability to allow system designs to protect various components from over-temperature situations. The PROCHOT# signal is bi-directional in that it can either signal when the processor has reached its maximum operating temperature or be driven from an external source to activate the TCC. The ability to activate the TCC via PROCHOT# can provide a means for thermal protection of system components. One application is the thermal protection of voltage regulators (VR). System designers can create a circuit to monitor the VR temperature and activate the TCC when the temperature limit of the VR is reached. By asserting PROCHOT# (pulled-low) and activating the TCC, the VR can cool down as a result of reduced processor power consumption. Bi-directional PROCHOT# can allow VR thermal designs to target maximum sustained current instead of maximum current. Systems should still provide proper cooling for the VR, and rely on bi-directional PROCHOT# only as a backup in case of system cooling failure. Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775 Socket for details on implementing the bi-directional PROCHOT# feature. 5.2.4 THERMTRIP# Signal Regardless of whether or not Thermal Monitor is enabled, in the event of a catastrophic cooling failure, the processor will automatically shut down when the silicon has reached an elevated temperature (refer to the THERMTRIP# definition in Table 25). At this point, the FSB signal THERMTRIP# will go active and stay active as described in Table 25. THERMTRIP# activation is independent of processor activity and does not generate any bus cycles. 5.2.5 TCONTROL and Fan Speed Reduction TCONTROL is a temperature specification based on a temperature reading from the thermal diode. The value for TCONTROL will be calibrated in manufacturing and configured for each processor. When TDIODE is above TCONTROL then TC must be at or below TC_MAX as defined by the thermal profile in Table 28; otherwise, the processor temperature can be maintained at TCONTROL (or lower) as measured by the thermal diode. The purpose of this feature is to support acoustic optimization through fan speed control. Contact your field representative for further details. 5.2.6 Thermal Diode The processor incorporates an on-die PNP transistor whose base emitter junction is used as a thermal "diode", with its collector shorted to Ground. A thermal sensor located on the system board may monitor the die temperature of the processor for thermal management and fan speed control. Table 30, Table 31, Table 32, and Table 33 provide the "diode" parameter and interface specifications. Two different sets of "diode" parameters are listed in Table 30 and 31. The Diode Model parameters (Table 30) apply to traditional thermal sensors that use the Diode Equation to determine the processor Datasheet 81 Thermal Specifications and Design Considerations temperature. Transistor Model parameters (Table 31) have been added to support thermal sensors that use the transistor equation method. The Transistor Model may provide more accurate temperature measurements when the diode ideality factor is closer to the maximum or minimum limits. This thermal "diode" is separate from the Thermal Monitor's thermal sensor and cannot be used to predict the behavior of the Thermal Monitor. Table 30. Thermal “Diode” Parameters using Diode Model Symbol IFW n RT Parameter Forward Bias Current Diode Ideality Factor Series Resistance Min 5 1.000 2.79 Typ — 1.009 4.52 Max 200 1.050 6.24 Unit µA Ω Notes 1 2, 3, 4 2, 3, 5 NOTES: 1. Intel does not support or recommend operation of the thermal diode under reverse bias. 2. Characterized across a temperature range of 50 - 80 °C. 3. Not 100% tested. Specified by design characterization. 4. The ideality factor, n, represents the deviation from ideal diode behavior as exemplified by the diode equation: IFW = IS * (e qVD/nkT –1) where IS = saturation current, q = electronic charge, VD = voltage across the diode, k = Boltzmann Constant, and T = absolute temperature (Kelvin). 5. The series resistance, RT, is provided to allow for a more accurate measurement of the junction temperature. RT, as defined, includes the lands of the processor but does not include any socket resistance or board trace resistance between the socket and the external remote diode thermal sensor. RT can be used by remote diode thermal sensors with automatic series resistance cancellation to calibrate out this error term. Another application is that a temperature offset can be manually calculated and programmed into an offset register in the remote diode thermal sensors as exemplified by the equation: Terror = [RT * (N-1) * IFWmin] / [nk/q * ln N] where Terror = sensor temperature error, N = sensor current ratio, k = Boltzmann Constant, q = electronic charge. Table 31. Thermal “Diode” Parameters using Transistor Model Symbol IFW IE nQ Beta RT Series Resistance Parameter Forward Bias Current Emitter Current Transistor Ideality Min 5 5 0.997 0.391 2.79 Typ — — 1.001 — 4.52 Max 200 200 1.005 0.760 6.24 Ω Unit µA µA 3, 4, 5 3, 4 3, 6 Notes 1, 2 NOTES: 1. Intel does not support or recommend operation of the thermal diode under reverse bias. 2. Same as IFW in Table 30 3. Characterized across a temperature range of 50 – 80 °C. 4. Not 100% tested. Specified by design characterization. 5. The ideality factor, nQ, represents the deviation from ideal transistor model behavior as exemplified by the equation for the collector current: IC = IS * (e qVBE/nQkT –1) Where IS = saturation current, q = electronic charge, VBE = voltage across the transistor base emitter junction (same nodes as VD), k = Boltzmann Constant, and T = absolute temperature (Kelvin). 6. The series resistance, RT, provided in the Diode Model Table (Table 30) can be used for more accurate readings as needed. 82 Datasheet Thermal Specifications and Design Considerations When calculating a temperature based on thermal diode measurements, a number of parameters must be either measured or assumed. Most devices measure the diode ideality and assume a series resistance and ideality trim value, although some are capable of also measuring the series resistance. Calculating the temperature is then accomplished using the equations listed under Table 30. In most temperature sensing devices, an expected value for the diode ideality is designed-in to the temperature calculation equation. If the designer of the temperature sensing device assumes a perfect diode the ideality value (also called ntrim) will be 1.000. Given that most diodes are not perfect, the designers usually select a ntrim value that more closely matches the behavior of the diodes in the processor. If the processors diode ideality deviates from that of ntrim, each calculated temperature will be offset by a fixed amount. This temperature offset can be calculated with the equation: Terror(nf) = Tmeasured X (1 – nactual/ntrim) Where Terror(nf) is the offset in degrees C, Tmeasured is in Kelvin, nactual is the measured ideality of the diode, and ntrim is the diode ideality assumed by the temperature sensing device. To improve the accuracy of diode based temperature measurements, a new register containing Thermal Diode Offset data has been added to the Celeron D processor. During manufacturing, each processors thermal diode will be evaluated for its behavior relative to a theoretical diode. Using the equation above, the temperature error created by the difference between ntrim and the actual ideality of the particular processor will be calculated. This Thermal Diode Offset value will be programmed in to the new diode correction MSR and when added to the Thermal Diode Base value can be used to correct temperatures read by diode based temperature sensing devices. If the ntrim value used to calculate the Thermal Diode Offset differs from the ntrim value used in a temperature sensing device, the Terror(nf) may not be accurate. If desired, the Thermal Diode Offset can be adjusted by calculating nactual and then recalculating the offset using the actual ntrim as defined in the temperature sensor manufacturers' datasheet. The Diode_Base value and ntrim used to calculate the Diode_Correction_Offset are listed in Table 32. Table 32. Thermal “Diode” ntrim and Diode_Correction_Offset Symbol Parameter Diode ideality used to calculate Diode_Offset Diode Base 1.008 0 C Unit ntrim Diode_Base Table 33. Thermal Diode Interface Signal Name THERMDA THERMDC Land Number AL1 AK1 Signal Description diode anode diode cathode §§ Datasheet 83 Thermal Specifications and Design Considerations 84 Datasheet Features 6 6.1 Features Power-On Configuration Options Several configuration options can be configured by hardware. The Celeron D processor samples the hardware configuration at reset, on the active-to-inactive transition of RESET#. For specifications on these options, refer to Table 34. The sampled information configures the processor for subsequent operation. These configuration options cannot be changed except by another reset. All resets reconfigure the processor; for reset purposes, the processor does not distinguish between a "warm" reset and a "power-on" reset. 6.2 Table 34. Clock Control and Low Power States Power-On Configuration Option Signals Configuration Option Output tristate Execute BIST In Order Queue pipelining (set IOQ depth to 1) Disable MCERR# observation Disable BINIT# observation APIC Cluster ID (0-3) Disable bus parking Symmetric agent arbitration ID RESERVED Signal1,2 SMI# INIT# A7# A9# A10# A[12:11]# A15# BR0# A[6:3]#, A8#, A[14:13]#, A[16:35]# NOTES: 1. Asserting this signal during RESET# will select the corresponding option. 2. Address signals not identified in this table as configuration options should not be asserted during RESET#. The processor allows the use of AutoHALT and Stop-Grant states to reduce power consumption by stopping the clock to internal sections of the processor, depending on each particular state. See Figure 15 for a visual representation of the processor low power states. Datasheet 85 Features Figure 15. Processor Low Power State Machine HALT or MWAIT Instruction and HALT Bus Cycle Generated Normal State Normal execution INIT#, BINIT#, INTR, NMI, SMI#, RESET#, FSB interrupts Enhanced HALT or HALT State BCLK running Snoops and interrupts allowed S As TP se C L rte K# d S D TP e- C as LK se # rte d STPCLK# Asserted STPCLK# De-asserted Snoop Event Occurs Snoop Event Serviced Enhanced HALT Snoop or HALT Snoop State BCLK running Service snoops to caches Stop Grant State BCLK running Snoops and interrupts allowed Snoop Event Occurs Snoop Event Serviced Stop Grant Snoop State BCLK running Service snoops to caches 6.2.1 Normal State This is the normal operating state for the processor. 6.2.2 HALT and Enhanced HALT Powerdown States The Celeron D processor supports the HALT or Enhanced HALT powerdown state. The Enhanced HALT Powerdown state is configured and enabled via the BIOS. The Enhanced HALT state must be enabled via the BIOS for the processor to remain within its specifications. The Enhanced HALT state is a lower power state as compared to the Stop Grant State. If Enhanced HALT is not enabled, the default Powerdown state entered will be HALT. Refer to the following sections for details about the HALT and Enhanced HALT states. 86 Datasheet Features 6.2.2.1 HALT Powerdown State HALT is a low power state entered when all the logical processors have executed the HALT or MWAIT instructions. When one of the logical processors executes the HALT instruction, that logical processor is halted, however, the other processor continues normal operation. The processor will transition to the Normal state upon the occurrence of SMI#, BINIT#, INIT#, or LINT[1:0] (NMI, INTR). RESET# will cause the processor to immediately initialize itself. The return from a System Management Interrupt (SMI) handler can be to either Normal Mode or the HALT Power Down state. See the Intel Architecture Software Developer's Manual, Volume III: System Programmer's Guide for more information. The return from a System Management Interrupt (SMI) handler can be to either Normal Mode or the HALT Power Down state. See the Intel Architecture Software Developer's Manual, Volume III: System Programmer's Guide for more information. The system can generate a STPCLK# while the processor is in the HALT Power Down state. When the system de-asserts the STPCLK# interrupt, the processor will return execution to the HALT state. While in HALT Power Down state, the processor will process bus snoops. 6.2.2.2 Enhanced HALT Powerdown State Enhanced HALT is a low power state entered when all logical processors have executed the HALT or MWAIT instructions and Enhanced HALT has been enabled via the BIOS. When one of the logical processors executes the HALT instruction, that logical processor is halted; however, the other processor continues normal operation. The processor will automatically transition to a lower frequency and voltage operating point before entering the Enhanced HALT state. Note that the processor FSB frequency is not altered; only the internal core frequency is changed. When entering the low power state, the processor will first switch to the lower bus ratio and then transition to the lower VID. While in Enhanced HALT state, the processor will process bus snoops. The processor exits the Enhanced HALT state when a break event occurs. When the processor exits the Enhanced HALT state, it will first transition the VID to the original value and then change the bus ratio back to the original value. 6.2.3 Stop Grant State When the STPCLK# signal is asserted, the Stop Grant state of the processor is entered 20 bus clocks after the response phase of the processor-issued Stop Grant Acknowledge special bus cycle. Since the GTL+ signals receive power from the FSB, these signals should not be driven (allowing the level to return to VTT) for minimum power drawn by the termination resistors in this state. In addition, all other input signals on the FSB should be driven to the inactive state. BINIT# will not be serviced while the processor is in Stop Grant state. The event will be latched and can be serviced by software upon exit from the Stop Grant state. RESET# will cause the processor to immediately initialize itself, but the processor will stay in Stop-Grant state. A transition back to the Normal state will occur with the deassertion of the STPCLK# signal. A transition to the Grant Snoop state will occur when the processor detects a snoop on the FSB (see Section 6.2.4). Datasheet 87 Features While in the Stop-Grant State, SMI#, INIT#, BINIT# and LINT[1:0] will be latched by the processor, and only serviced when the processor returns to the Normal State. Only one occurrence of each event will be recognized upon return to the Normal state. While in Stop-Grant state, the processor will process a FSB snoop. 6.2.4 Enhanced HALT Snoop or HALT Snoop State, Stop Grant Snoop State The Enhanced HALT Snoop State is used in conjunction with the new Enhanced HALT state. If Enhanced HALT state is not enabled in the BIOS, the default Snoop State entered will be the HALT Snoop State. Refer to the sections below for details on HALT Snoop State, Grant Snoop State and Enhanced HALT Snoop State. 6.2.4.1 HALT Snoop State, Stop Grant Snoop State The processor will respond to snoop transactions on the FSB while in Stop-Grant state or in HALT Power Down state. During a snoop transaction, the processor enters the HALT Snoop State:Stop Grant Snoop state. The processor will stay in this state until the snoop on the FSB has been serviced (whether by the processor or another agent on the FSB). After the snoop is serviced, the processor will return to the Stop Grant state or HALT Power Down state, as appropriate. 6.2.4.2 Enhanced HALT Snoop State The Enhanced HALT Snoop State is the default Snoop State when the Enhanced HALT state is enabled via the BIOS. The processor will remain in the lower bus ratio and VID operating point of the Enhanced HALT state. While in the Enhanced HALT Snoop State, snoops are handled the same way as in the HALT Snoop State. After the snoop is serviced the processor will return to the Enhanced HALT state. §§ 88 Datasheet Boxed Processor Specifications 7 Boxed Processor Specifications The Celeron D processor will also be offered as an Intel boxed processor. Intel boxed processors are intended for system integrators who build systems from baseboards and standard components. The Boxed Celeron D processor will be supplied with a cooling solution. This chapter documents baseboard and system requirements for the cooling solution that will be supplied with the boxed Celeron D processor. This chapter is particularly important for OEMs that manufacture baseboards for system integrators. Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and inches [in brackets]. Figure 16 shows a mechanical representation of a boxed Celeron D processor. Note: • Drawings in this section reflect only the specifications on the Intel boxed processor product. These dimensions should not be used as a generic keep-out zone for all cooling solutions. It is the system designers’ responsibility to consider their proprietary cooling solution when designing to the required keep-out zone on their system platforms and chassis. Refer to the appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2) for further guidance. Contact your local Intel Sales Representative for this document. Figure 16. Mechanical Representation of the Boxed Processor NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink. 7.1 7.1.1 Mechanical Specifications Boxed Processor Cooling Solution Dimensions This section documents the mechanical specifications of the boxed Celeron D processor. The boxed processor will be shipped with an unattached fan heatsink. Figure 16 shows a mechanical representation of the boxed Celeron D processor. Datasheet 89 Boxed Processor Specifications Clearance is required around the fan heatsink to ensure unimpeded airflow for proper cooling. The physical space requirements and dimensions for the boxed processor with assembled fan heatsink are shown in Figure 17 (Side View), and Figure 18 (Top View). The airspace requirements for the boxed processor fan heatsink must also be incorporated into new baseboard and system designs. Airspace requirements are shown in Figure 22 and Figure 23. Note that some figures have centerlines shown (marked with alphabetic designations) to clarify relative dimensioning. Figure 17. Space Requirements for the Boxed Processor (Side View: applies to all four side views) 95.0 [3.74] 81.3 [3.2] 10.0 [0.39] 25.0 [0.98] Figure 18. Space Requirements for the Boxed Processor (Top View) 95.0 [3.74] 95.0 [3.74] NOTES: 1. The boxed Celeron D processor in the 775-land package cooling solution with clip is currently under development and, at this time, is preliminary. The diagrams shown may not reflect the final product. 2. Diagram does not show the attached hardware for the clip design and is provided only as a mechanical representation. 90 Datasheet Boxed Processor Specifications Figure 19. Space Requirements for the Boxed Processor (Overall View) 7.1.2 Boxed Processor Fan Heatsink Weight The boxed processor fan heatsink will not weigh more than 550 grams. See Chapter 5 and the appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2) for details on the processor weight and heatsink requirements. 7.1.3 Boxed Processor Retention Mechanism and Heatsink Attach Clip Assembly The boxed processor thermal solution requires a heatsink attach clip assembly, to secure the processor and fan heatsink in the baseboard socket. The boxed processor will ship with the heatsink attach clip assembly. 7.2 7.2.1 Electrical Requirements Fan Heatsink Power Supply The boxed processor's fan heatsink requires a +12 V power supply. A fan power cable will be shipped with the boxed processor to draw power from a power header on the baseboard. The power cable connector and pinout are shown in Figure 20. Baseboards must provide a matched power header to support the boxed processor. Table 35 contains specifications for the input and output signals at the fan heatsink connector. The fan heatsink outputs a SENSE signal that is an open-collector output that pulses at a rate of two pulses per fan revolution. A baseboard pull-up resistor provides VOH to match the system board-mounted fan speed monitor requirements, if applicable. Use of the SENSE signal is optional. If the SENSE signal is not used, pin 3 of the connector should be tied to GND. The fan heatsink receives a PWM signal from the motherboard from the fourth pin of the connector labeled as CONTROL. Datasheet 91 Boxed Processor Specifications Note: The boxed processor’s fan heatsink requires a constant +12 V supplied to pin 2 and does not support variable voltage control or 3-pin PWM control. The power header on the baseboard must be positioned to allow the fan heatsink power cable to reach it. The power header identification and location should be documented in the platform documentation, or on the system board itself. Figure 21 shows the location of the fan power connector relative to the processor socket. The baseboard power header should be positioned within 4.33 inches from the center of the processor socket. Figure 20. Boxed Processor Fan Heatsink Power Cable Connector Description Pin 1 2 3 4 Signal GND +12 V SENSE CONTROL Straight square pin, 4-pin terminal housing with polarizing ribs and friction locking ramp. 0.100" pitch, 0.025" square pin width. Match with straight pin, friction lock header on mainboard. 1234 Table 35. Fan Heatsink Power and Signal Specifications Description +12 V: 12 volt fan power supply IC: Peak Fan current draw Fan start-up current draw Fan start-up current draw maximum duration SENSE: SENSE frequency CONTROL — — — 1.1 — — 1.5 2.2 1.0 A A Second pulses per fan revolution kHz Min 10.2 Typ 12 Max 13.8 Unit V Notes - — 21 2 25 — 28 1 2, 3 NOTES: 1. Baseboard should pull this pin up to 5 V with a resistor. 2. Open Drain Type, Pulse Width Modulated. 3. Fan will have a pull-up resistor to 4.75 V, max 5.25 V. 92 Datasheet Boxed Processor Specifications Figure 21. Baseboard Power Header Placement Relative to Processor Socket B R110 [4.33] C 7.3 Thermal Specifications This section describes the cooling requirements of the fan heatsink solution utilized by the boxed processor. 7.3.1 Boxed Processor Cooling Requirements The boxed processor may be directly cooled with a fan heatsink. However, meeting the processor's temperature specification is also a function of the thermal design of the entire system, and ultimately the responsibility of the system integrator. The processor temperature specification is in Chapter 5. The boxed processor fan heatsink is able to keep the processor temperature within the specifications (see Table 26) in chassis that provide good thermal management. For the boxed processor fan heatsink to operate properly, it is critical that the airflow provided to the fan heatsink is unimpeded. Airflow of the fan heatsink is into the center and out of the sides of the fan heatsink. Airspace is required around the fan to ensure that the airflow through the fan heatsink is not blocked. Blocking the airflow to the fan heatsink reduces the cooling efficiency and decreases fan life. Figure 22 and Figure 23 illustrate an acceptable airspace clearance for the fan heatsink. The air temperature entering the fan should be kept below 38 °C. A Thermally Advantaged Chassis with an Air Guide 1.1 is recommended to meet the 38 °C requirement. Again, meeting the processor's temperature specification is the responsibility of the system integrator. Note: The processor fan is the primary source of airflow for cooling the VCC voltage regulator. Dedicated voltage regulator cooling components may be necessary if the selected fan is not capable of keeping regulator components below maximum rated temperatures. Datasheet 93 Boxed Processor Specifications Figure 22. Boxed Processor Fan Heatsink Airspace Keep-out Requirements (Side 1 View) Figure 23. Boxed Processor Fan Heatsink Airspace Keep-out Requirements (Side 2 View) §§ 94 Datasheet Debug Tools Specifications 8 8.1 Debug Tools Specifications Logic Analyzer Interface (LAI) Intel is working with two logic analyzer vendors to provide logic analyzer interfaces (LAIs) for use in debugging Celeron D processor systems. Tektronix and Agilent should be contacted to get specific information about their logic analyzer interfaces. The following information is general in nature. Specific information must be obtained from the logic analyzer vendor. Due to the complexity of Celeron D processor systems, the LAI is critical in providing the ability to probe and capture FSB signals. There are two sets of considerations to keep in mind when designing a Celeron D processor system that can make use of an LAI: mechanical and electrical. 8.1.1 Mechanical Considerations The LAI is installed between the processor socket and the Celeron D processor. The LAI lands plug into the processor socket, while the Celeron D processor lands plug into a socket on the LAI. Cabling that is part of the LAI egresses the system to allow an electrical connection between the Celeron D processor and a logic analyzer. The maximum volume occupied by the LAI, known as the keepout volume, as well as the cable egress restrictions, should be obtained from the logic analyzer vendor. System designers must make sure that the keepout volume remains unobstructed inside the system. Note that it is possible that the keepout volume reserved for the LAI may differ from the space normally occupied by the Celeron D processor heatsink. If this is the case, the logic analyzer vendor will provide a cooling solution as part of the LAI. 8.1.2 Electrical Considerations The LAI will also affect the electrical performance of the FSB; therefore, it is critical to obtain electrical load models from each of the logic analyzers to be able to run system level simulations to prove that their tool will work in the system. Contact the logic analyzer vendor for electrical specifications and load models for the LAI solution it provides. §§ Datasheet 95

很抱歉,暂时无法提供与“347”相匹配的价格&库存,您可以联系我们找货

免费人工找货
LF347N
    •  国内价格
    • 1+1.45488

    库存:21

    PH-00347
    •  国内价格
    • 1+1.131
    • 10+1.044
    • 30+1.0266
    • 100+0.9744

    库存:205

    1803471
    •  国内价格
    • 1+4.732
    • 10+4.368
    • 30+4.2952

    库存:80

    1843347
    •  国内价格
    • 1+16.614
    • 10+15.194
    • 30+14.91

    库存:48

    TDM3478
    •  国内价格
    • 1+0.96
    • 10+0.885
    • 30+0.87

    库存:20

    TDM3478
    •  国内价格
    • 1+1.08751
    • 30+1.05001
    • 100+1.01251
    • 500+0.93751
    • 1000+0.9
    • 2000+0.8775

    库存:2805

    63477-1
    •  国内价格
    • 1+0.16095
    • 30+0.1548
    • 100+0.14866
    • 500+0.13637
    • 1000+0.13023
    • 2000+0.12654

    库存:37750

    LF347DR
      •  国内价格
      • 1+1.0922
      • 10+1.0062
      • 30+0.989
      • 100+0.9374

      库存:200

      01EC1347
      •  国内价格
      • 50+0.1064
      • 200+0.0994
      • 600+0.0924
      • 2000+0.0854
      • 5000+0.0784
      • 10000+0.0735

      库存:1000

      01EC3470
      •  国内价格
      • 10+0.3912
      • 100+0.3552
      • 500+0.3192
      • 1000+0.2832
      • 2000+0.2592
      • 4000+0.252

      库存:3