PXLA8591LR

Product Brief Intel PRO/10GbE LR Server Adapter ® Industry-leading 10 Gigabit Single-mode Fiber Server Connection Extends Ethernet distances up to 10 km Highly integrated PCI-X secondgeneration silicon for high performance I Smaller form factor with XPAK Optical Transceiver fits in a standard server PCI or PCI-X slot I I The Intelligent Way to Connect The Intel® PRO/10GbE LR Server Adapter— the industry’s second-generation 10 Gigabit Ethernet adapter—enables more productive networks with the fastest Ethernet connectivity available. The Intel PRO/10GbE LR Server Adapter delivers industry-leading performance to bandwidth-intensive applications using a highly integrated PCI-X Intel® 82597EX 133 MHz/ 64-bit 10GbE controller. High-speed server connectivity—once reserved for costly proprietary technologies such as high-performance computing clusters and grid-based computing— can now be achieved with the industry-standard Intel PRO/10GbE LR Server Adapter. The IEEE 802.3ae* 10 Gigabit Ethernet standard extends single-mode fiber distances to 10 km at 10 Gbps line speeds. Using the Intel PRO/10GbE LR Server Adapter, enterprises can cost-effectively expand campus-wide connectivity and take control of their corporate networks with privately owned fiber that eliminates costly leased lines. And the Intel PRO/10GbE LR Server Adapter makes it possible for global companies to decrease critical data center back-up time to provide maximum network availability. The Intel PRO/10GbE LR Server Adapter helps improve network productivity, extend reach, and eliminate costly proprietary networking technologies, while enabling deployment of standards-compliant Ethernet connectivity based on IEEE 802.3ae 10 Gigabit Ethernet standard. Features Intel® 82597EX 10GbE PCI-X 133 MHz/64-bit MAC controller Single-mode fiber support through 1310 nm optical module IEEE 802.3ae* 10GBase-LR compliant Jumbo Frames supported up to 16 KB TCP/IP segmentation and TCP checksum offload in RX and TX 256 KB RX and 32 KB TX data FIFO Parity protection for RX FIFO buffer Mechanisms for delaying/reducing TX and RX frame interrupts PCI-X 1.0a and PCI 2.3 SC-Duplex connector for single-mode optical fiber Flow Control 802.3x* PCI 2.2 Message Signaled Interrupts Benefits High performance on widely adopted 2nd-generation PCI hostbus interface Extends cable length up to 10 km; noise resistant for signal integrity Supports industry-wide 10 Gigabit Ethernet standard Increase performance through reduced overhead Provides efficiency for host processing Enhanced TX and RX logic with minimum buffer requirements Data integrity Reduces CPU utilization Compatible with compliant host bus interface Ease of use with currently available 10GbE equipment Supports industry-wide networking standard Improves system interrupt handling Product Brief Intel® PRO/10GbE LR Server Adapter Specifications: Intel® PRO/10GbE LR Server Adapter General Product Code Connectors IEEE Standard/Network Topology Wiring Adapter Product Features Intel® SingleDriver™ Technology Plug and Play Specification Support Easy Installation, Intel® PROSet Utility and Intel® PRO Intelligent Install Full-duplex Fiber Medium Distance Network Management WBEM-CIM Support WMI & SNMP-manageable Hardware Diagnostics Intel® Boot Agent ACPI Power Management PXE 2.0 Jumbo Frames Support (16 KB) NOS Software Support Microsoft Windows* 2000 Microsoft Windows Server 2003 Linux* 2.2.5 or Later Free BSD 1.0.6 Warranty Limited Lifetime Warranty 90-day Money-back Guarantee (U.S. and Canada) Advanced Software Features Adapter Fault Tolerance 802.1q VLANs 802.3x Flow Control TCP Checksum Offload IEEE 802.1p* TCP Segmentation/Large Send Off-load Save and Restore Technical Features Data Rate(s) Supported per Port Bus Type Bus Width Bus Speed (MHz) Onboard Memory Interrupt Levels IEEE Support Hardware Certifications Data Transfer Mode Controller—Processor Typical Power Consumption Operating Temperature Operating Humidity Laser Product Physical Dimensions Length Width PXLA8591LR SC duplex IEEE 10GBase-LR Single-mode fiber I I I I Order Code I PXLA8591LR (Single Pack) Companion Products Consider these Intel® products in your server and network planning: Intel® PRO/1000 MT Desktop Adapter I Intel® PRO/1000 MT Server Adapter I Intel® PRO/1000 MT Dual Port Server Adapter I Intel® PRO/1000 MT Quad Port Server Adapter I Intel® PRO/1000 MF Server Adapter I Intel® PRO/1000 MF Server Adapters (LX) I Intel® PRO/1000 MF Dual Port Server Adapter I Intel® PRO/10GbE SR Server Adapter I Other Intel® PRO Desktop, Mobile, Wireless and Server Adapters I Intel® Itanium® processors I Intel® Xeon™ processors I Intel® Server Boards I 10 km I I I I I I I I I I I I I Network-Ready PCs Top PC and server manufacturers offer Intel® adapters in their new products. Specify or ask for Intel® PRO Network Connections with your next PC, server, or mobile PC purchase. For a list of preferred suppliers, visit us at www.intel.com/network/connectivity/how_to_buy/index.htm. Customer Support I I I I I I I Intel® Customer Support Services offers a broad selection of programs including phone support and warranty service. For more information, contact us at support.intel.com/support/ network. Service and availability may vary by country. For Product Information 10 Gbps PCI or PCI-X 64-bit 133 256 KB INTA 802.3ae* FCC Class A, CE, and Microsoft Bus-master DMA Intel® 82597EX