10ETS12S

Bulletin I2206 12/04 SAFEIR Series 10ETS12SPbF INPUT RECTIFIER DIODE Lead-Free ("PbF" suffix) VF < 1V @ 10A IFSM = 200A Description/ Features The 10ETS12SPbF rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. VRRM = 1200V Output Current in Typical Applications Applications Capacitive input filter TA = 55°C, TJ = 125°C common heatsink of 1°C/ W Single-phase Bridge 12.0 Three-phase Bridge 16.0 Units A Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM IFSM VF TJ @ 10 A, TJ = 25°C Package Outline Units A V A V °C Values 10 1200 200 1.1 - 40 to 150 D2 Pak (SMD-220) www.irf.com 1 10ETS12SPbF SAFEIR Series Bulletin I2206 03/05 Voltage Ratings VRRM , maximum Part Number peak reverse voltage V 1200 VRSM , maximum non repetitive peak reverse voltage V 1300 IRRM 150°C mA 0.5 10ETS12SPbF Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2t Max. Peak One Cycle Non-Repetitive Surge Current Max. I2t for fusing Values 10 170 200 130 145 Units A A A2s A √s 2 Conditions @ TC = 105° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied I √t 2 Max. I √t for fusing 2 1450 Electrical Specifications Parameters VFM rt Max. Forward Voltage Drop Forward slope resistance Values 1.1 20 0.82 0.05 0.50 Units V mΩ V mA Conditions @ 10A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VF(TO) Threshold voltage IRM Max. Reverse Leakage Current VR = rated VRRM Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values - 40 to 150 - 40 to 150 2.5 62 240 2 (0.07) Units °C °C °C/W °C/W °C g (oz.) Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient (PCB Mount)* Ts wt Soldering Temperature Approximate Weight Case Style Device Marking 2 DC operation D2Pak (SMD-220) 10ETS12S * When mounted on 1" square (650mm ) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 2 www.irf.com 10ETS12SPbF SAFEIR Series Bulletin I2206 03/05 Maximum Allowable Case T emperature (°C) 10ET .. S S eries R thJC (DC) = 2.5 °C/ W Maximum Allowable Case T emperature (°C) 150 140 130 150 140 130 10ET .. S S eries R thJC (DC) = 2.5 °C/ W Conduction Angle 120 110 100 90 80 30° 60° 90° 120° 8 10 Conduction Period 120 110 100 90 30° 60° 90° 120° 10 180° 12 14 DC 16 18 180° 12 0 2 4 6 0 2 4 6 8 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Maximum Average Forward Power Loss (W) 16 14 12 10 R Limit MS 8 6 4 2 0 0 2 4 6 8 10 Average Forward Current (A) Conduction Angle Fig. 2 - Current Rating Characteristics 20 18 16 14 12 10 8 6 4 2 0 0 2 4 6 8 R Limit MS Conduction Period 180° 120° 90° 60° 30° Maximum Average Forward Power Los (W) s DC 180° 120° 90° 60° 30° 10ET .. S S eries TJ = 150°C 10ET .. S S eries TJ = 150°C 10 12 14 16 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Peak Half S ine Wave Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 240 220 Maximum Non R epetitive S urge Current Versus Pulse T rain Duration. Initial TJ = 150 °C 200 No Voltage Reap plied R ated VRRM Reapplied 180 Peak Half S ine Wave Forward Current (A) 200 180 160 140 120 100 80 60 40 1 At Any Ra ted Load Condition And With Rated V RRM Ap plied Following S urge. Initial TJ = 150°C @60 Hz 0.0083 s @50 Hz 0.0100 s 160 140 120 100 80 60 40 0.01 10ET .. S S eries 10ET .. S S eries 10 100 0.1 Pulse T rain Duration (s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current www.irf.com 3 10ETS12SPbF SAFEIR Series Bulletin I2206 03/05 100 Instantaneous F orward Current (A) TJ= 25°C TJ= 150°C 10 10ET .. S S eries 1 0 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) Fig. 8 - Forward Voltage Drop Characteristics T rans ient T rmal Impeda nc e Z thJC (°C/ W) he 10 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 S teady S tate Value (DC Operation) 1 S ingle Pulse 10ET .. S S eries 0.1 0.0001 0.001 0.01 0.1 1 10 S quare Wave Pulse Duration (s ) Fig. 9 - Thermal Impedance ZthJC Characteristics 4 www.irf.com 10ETS12SPbF SAFEIR Series Bulletin I2206 03/05 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Dimensions in millimeters and inches Marking Information THIS IS A 10ETS12S WITH LOT CODE 5K3A ASSEMBLED ON WW 12, 2000 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER 10ETS12S DATE CODE YEAR 0 = 2000 WEEK 12 P = LEAD-FREE www.irf.com 5 10ETS12SPbF SAFEIR Series Bulletin I2206 03/05 Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIR ECTION 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) 24.30 (0.957) 23.90 (0.941) TRL 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) DIA. 4.72 (0.186) 4.52 (0.178) FEED DIRECTION Dimensions in millimeters and inches 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples 60 (2.362) DIA . MIN. 360 (14.173) DIA. MAX. of 800 pieces per reel for both TRL and TRR. 6 www.irf.com 10ETS12SPbF SAFEIR Series Bulletin I2206 03/05 Ordering Information Table Device Code 10 1 1 2 3 4 5 6 7 - E 2 T 3 S 4 12 5 S 6 TR 7 PbF 8 Current Rating (10 = 10A) Circuit Configuration E = Single Diode Package T = TO-220AC Type of Silicon S = Standard Recovery Rectifier Voltage Rating (12 = 1200V) S = TO-220 D2Pak (SMD-220) Version none = Tube TRL = Tape & Reel (Left Oriented) TRR = Tape & Reel (Right Oriented) 8 - none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/05 www.irf.com 7